maemo.org - Talk
Page 38 of 85 « First 283637 38 394048 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)
-   -   U-Boot for Nokia RX-51 with BootMenu (updated version 2012.10-rc3-1) (https://talk.maemo.org/showthread.php?t=81613)

Nobless 2012-07-16 15:40
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
Quote:
Originally Posted by peterleinchen (Post 1238261)
After kernel flashing via USB the u-boot was gone?

Do you have SD card inside? Pull out and try again.
If not, put one inside and try again. (preferably this, as I have one inside)
Yes, instantly loads Maemo. Note: When keyboard opened and flashed via USB opens bootmenu, when loading with u-boot 2012.04-2 the kernel it not shows up. Is it important to ?

Yes i have one inside, i do what u sad and the same error occurs.

peterleinchen 2012-07-16 16:31
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
Then I think I do not have an idea anymore.
Or maybe one try: boot with keyboard out, select u-boot console and type run attachboot. But I guess this will produce the same error :(

Nobless 2012-07-16 16:48
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
already tried, the same.. ;) ty for helping

misiak 2012-07-16 17:51
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
Well, according to http://talk.maemo.org/showpost.php?p...0&postcount=23 the 2104 hw revision is a bit problematic. This with addition to the fact that new u-boot has some important change in atags reading/setting (at least as far as i understood after reading last few pages quickly) may be the reason for your help.

Pali, could you comment on that? It looks Nobless has N900 with hw rev 2104 which cannot be booted with new u-boot. May it be a release blocker?

Nobless, could you boot your N900 by loading kernel from flasher via usb and try to read atags? Here is instruction how to do that once you successfully boot your n900 using flasher - it is important that you do this using flasher and not load kernel by old, working u-boot. If it's indeed a problem with u-boot, this may help solve it not only for you, but for many other 2104 owners.

don_falcone 2012-07-16 18:31
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
Didn't pali still wanted some atags read out from an 2104 revision?

Nobless 2012-07-16 19:22
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
very very sorry! just rechecked HW revision with
Quote:
cat /peroc/cpuinfo
Typed a mistake in the older post.
The HW revision is 2204 not 2104! Long time ago I checked the revision so similars numbers of misled me.. :( Still need a dump of readed atags ?


Quote:
Originally Posted by pali (Post 1238175)
just edit /sbin/preinit and add line "modprobe fbcon" before condition if exists file /bootmenu.sh

please note, that framebuffer module (fbcon) and also /sbin/preinit are stored in rootfs. If rootfs is corrupted no framebuffer output!
works nicely when kernel flashed via USB! that means mine rootfs is not corrupted. So the problem related to something else ?

peterleinchen 2012-07-16 20:44
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
Do not think so, but better to provide it in that thread, so pali (or yourself) may compare easily.
I also do not think that your rootfs is corrupted, but have no clue.

Nobless 2012-07-16 21:26
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
Posted here

Nobless 2012-07-18 10:40
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
any news here ? :)

ivgalvez 2012-07-18 11:13
Re: U-Boot for Nokia RX-51 with BootMenu (updated version 2012.04-2)
 
Please, could anyone point me to any tutorial or how-to, about migrating from an already existing multiboot installation (with Nitdroid and backupmenu) to an uboot/bootmenu based one?

Or do I need to first uninstall all the stuff (Nitdroid, backupmenu, KP, multiboot) and start over?


All times are GMT. The time now is 22:02.
Page 38 of 85 « First 283637 38 394048 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8