Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Thank you very much for your answer i will wait to solve the site and try it again but please let me know about my question above .
as much i remember i had 14-15 files on a folder called PRODUCT and i use only the 2 of them, do i need the extra files???

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

@andreasole
As I wrote above, you need just flasher and firmware image. You may also want to bring back all the factory region-specific content (i. e. maps, wallpapers) – in that case you should download so-called content file (named DFL61_HARMATTAN_40.2012.13-7.EURASIA_EMMC_EURASIA.bin in your case).
However, content file is optional, and the flashing process will go absolutely smoothly without one (not mentioning that such things are quite rare birds on the net).

Speaking about the site – it is fully functional at the moment, feel free to download. The thing is, you may see the certificate error (or not –
depends on your browser), so just ignore it (shame on me, I should have never had any business with StartSSL, but it is for another topic :) ).

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Hahaha the point is that you try it (starssl)
Thank you for the answers i will do it after i change the screen LSD cause only the indicator light is working and the Nokia sound after you switching off , but you know what, is strange because is not scratch and there is not any damage, do you thing is something else???

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

All issues with certificates are fixed.

@andreasole
Display cable might be broken.
Since it is kind of slowly going off topic, I think it would be better to continue in PM :)

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

when ı try to download it say server nokia dead :(

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Hi there,
I have Macos X el capitan.
how can i find all files to flash N9?
Also i wonder about open mode 1.3 if possible? What is the difference?
In fact i want to install sailfish on n9 but no link even working?
in another words sailfish interface is not good as meego!

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

The links in this post would make a good start:http://talk.maemo.org/showpost.php?p...57&postcount=2

Sailfish port was never fully functiona,l so really needed to be a dual boot device.

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

I heard about it and i think the problem is old kernel of meego
I think sailfish needs to be recompiled on n9!
but i heard about apkenv to run some android apps.
i need whatsapp on n9! did there anyone heard that whatsapp on n9 via apkenv?

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

what a pity whatever ı did couldnt make the phone dedect pc ...

ı am plugıng usb to pc it says broken device on windows...

and plugıng on ubuntu it no notification....

so ı cant flash it really it been stone...

can somebody help me the only problem is a few etc files in root classor has benn deleted.. al is that causıng phone zombiiii :(

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

For what it's worth, someone actually managed to get Sailfish 2.0.4 running on the N9, slow and unstable but running nevertheless: https://www.youtube.com/watch?v=2MXU_WoqmvI

It's clearly possible to make it work, the question is who's going to put in the effort for a device which generally works fine already?

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

It's not "Broken Device", you cannot break N9 just by deleting files. :)
Windows does not recognize it because you are missing drivers.

As for Ubuntu, it should recognize it immediately, as drivers are built-in.

Are you running Ubuntu on virtual machine or baremetal?
If you use VM, then you need to make sure that USB is routed correctly from host to guest. (set up guest addons or something on virtualbox, I think...)

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

I ınstalled Nokia connectıvıty cable drıver today and got thıs screen today... what to do mates..

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

better,
download an Ubuntu-Live-CD and try to flash from there or an old WinXP

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

I have ubuntu but just A fen dayı i met it so dont konu something about it

Can you please step by step say on it ,

And i have only maın.bın file dont have mmc so it enough for Flash?

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Sorry for my poor english some sleepy

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

enough for flash. What you have to do look on the first post on this thread. No more to say

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

in this mod on the picture ı coulndt fınd wich command to run...

flasher -i ??

flasher a ??

or somethıng else :(

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

again. Read the first post here. Nothing more to say

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

flasher -f -F main.bin -F emmc.bin

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Thank you all mates,

Especıally Nıeldk,

n9 ıs has been turn to life :) :),

But i thınk i used wrong fırmware on emmc ( coulndt fınd)

so A lıttle problem goıng on ıts not workıng good,

Bootıng, chargıng but stuckıng on the theacher,

And when it boot there ıs weırd texts on screen,

I know i should reflash it wıth correct fırmware,

But stıll same Code...?

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

evrythıng goıng fıne durıng the flash but when ıt come to emmc;

it starting from %30 and stoping and turnıng back to %0

then runnıng again by the %100 after that th the window shuttıng ,

no visible notifıcatıon that says ıt flashed succesful...

the rootfs fıle orıgınal but the emmc fıle is from another n9 phone..

:/ :S

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

if emmc.bin is home or MyDocs, then it doesnt matter (MyDocs is mainly sample video/music[not sure about maps])

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

No matter really but devıce ıs not workıng stable...

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

So maybe try to reset the hole N9
flasher -f -F main.bin --erase-user-data=secure

Its all documented in the first post

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Sorry,

i couldnt related some commands to my problem,
for that i am askıng to here..

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

ı run your command but still its not stable...

red lıght ın the flshlıght and white led lisht at the front sight permanently open.. :confused:

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Hardware defect?

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

I dont think so i couldnt catch A clean Flash on it ;

Tought the emmc full of rubbish,

So devıce storage shows only, 6.38 GB. :(

Or i am totally wrong ..

Here the pıcture

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

@Anatolian, it might be that your partition table is mislaid. Try cold-flashing the device, that might help as it rewrites the partitions as in the original device layout;

flasher -c -f -F main.bin --erase-user-data=secure

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

ı run this command but it not found the ''nolo'' :/

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

As other mentioned try full reflash.
You can also check dmesg for onenand errors. I have plenty of such, but it works stable.

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Nope ,
I have reflashed it Like in the commands of Nıeldk

( full) and the storage turn to normal (15.76 GB) but stıll boot

error ( (weırd texts, karnel ınformatıon when bootıng) cam not

workıng stable, front led open, back led red Light open :),

But more stable THAN yesterday :)

I have run the top in the xtermınal to sen what cpu busy

Nothıng understand ,

Something weırd here in the pıcture

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

If front LED was continually flashing and red LED was on, I would have wondered whether R & D mode had been enabled at some point. Does entering following in flasher make any difference to boot?
To disable R & D mode use

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Thank you mate solve, R D mode was open Like Said..

Thanks all guys.

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Please someone explain what is the problem??

@andreasole:~/Downloads$ sudo flasher -F main.bin -F emmc.bin -f
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 021.
Device identifier: 357923047555604 (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 3492 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 001, device address 022.
Device identifier: 357923047555604 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 94 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 2883 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 584 kB/s]
[_] rootfs [writing 7 % 89088 / 1170282 kB 2507 kB/s]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
Raw data transfer failed: Resource temporarily unavailable

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 2883 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 584 kB/s]
[f] rootfs [writing 0 % 89088 / 1170282 kB 2507 kB/s]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
========================================

ERROR: Failed to flash images
andreasole@andreasole:~/Downloads$ sudo flasher -F main.bin -F emmc.bin -f --no-preserve
flasher 3.12.1 (Oct 5 2011) Harmattan
Warning: --no-preserve is not recommended, instead use erase commands
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 022.
Device identifier: 357923047555604 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 95 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3198 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 879 kB/s]
[f] rootfs [pending 0 % 0 / 0 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not remove mount directory /tmp/sudmmchggbfl/mnt: No such file or directory
[Pipe 4] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
andreasole@andreasole:~/Downloads$ sudo flasher -f -F main.bin --erase-user-data=secure -F emmc.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 022.
Device identifier: 357923047555604 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8

Battery level 95 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 98 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [init 16 % 1024 / 6050 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 624 kB/s]
[_] rootfs [finishing 100 % 6144 / 1170282 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3205 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 624 kB/s]
[f] rootfs [finishing 0 % 7168 / 1170282 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not remove mount directory /tmp/sudmmcfBCB8F/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
andreasole@andreasole:~/Downloads$ sudo flasher -F main.bin -F emmc.bin -f
[sudo] password for andreasole:
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 023.
Device identifier: 357923047555604 (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 4171 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 001, device address 024.
Device identifier: 357923047555604 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 92 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 2946 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 541 kB/s]
[f] rootfs [writing 0 % 408576 / 1170282 kB 3087 kB/s]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
========================================

ERROR: Failed to flash images
andreasole@andreasole:~/Downloads$ sudo flasher -i
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 024.
Device identifier: 357923047555604 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Success
andreasole@andreasole:~/Downloads$ sudo flasher -F main.bin -F emmc.bin -f --no-preserve
flasher 3.12.1 (Oct 5 2011) Harmattan
Warning: --no-preserve is not recommended, instead use erase commands
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 024.
Device identifier: 357923047555604 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3200 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 885 kB/s]
[f] rootfs [pending 0 % 0 / 0 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not remove mount directory /tmp/sudmmcwADmzO/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

And after this command i get this

@andreasole:~/Downloads$ sudo flasher -f -F main.bin --erase-user-data=secure -F emmc.bin --erase-mmc=secure
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 024.
Device identifier: 357923047555604 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Warning: user data may reside on MMC. In that case the MMC is unnecessarily erased twice.

Battery level 94 %, continuing.
Erasing, this may take a while.
Erase done.

Battery level 98 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 97 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 739 kB/s]
[_] rootfs [finishing 100 % 7168 / 1170282 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3174 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 739 kB/s]
[f] rootfs [finishing 0 % 8192 / 1170282 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not remove mount directory /tmp/sudmmctHBhqI/mnt: No such file or directory
[Pipe 4] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
andreasole@andreasole:~/Downloads$

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Unfortunately looks like HW issue with flash memory, see here for similar issue: http://talk.maemo.org/showthread.php?t=94575

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Finally after this command

flasher -F main.bin -F emmc.bin -f

It flash only the main.bin so the phone starts again , now my question is that i was doing this to install sailfis so i continue from from the STEP 3 flash Openmode Kernel and continue or i need also flash emmc.bin?

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

I had nokia with variant 232 I flashed it with 341 which is of poland.
Now it is asking me for unlock code.But I live in India and here we dont have arrier for n9.What should i do.

Should i flash it with 009 variant??

Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 

Unlock code? Are you sure it’s network locked?
If it’s phone lock, you might try “12345”