maemo.org - Talk
Page 39 of 45 « First 293738 39 4041 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   The Other Half (https://talk.maemo.org/forumdisplay.php?f=59)
-   -   Jolla OtherHalf OLED display / toholed (https://talk.maemo.org/showthread.php?t=92239)

juiceme 2015-01-26 10:23
Re: Jolla OtherHalf OLED display / toholed
 
Quote:
Originally Posted by pichlo (Post 1458218)
I like it very much. The price is totally acceptable and I would love to order one but I have this problem. Any hint on how to debug it? As mentioned there, neither lshal nor dmesg provided the answer, nor did cleaning the contacts as suggested here.
Looks your NFC antenna is dead then. @coderus had the same problem and while we visited the Jolla HQ, the Care people swapped a new middle-cover in his device; hey presto, it started working :D

So. looks like a trip to Jolla Care, imho.

pichlo 2015-01-26 10:30
Re: Jolla OtherHalf OLED display / toholed
 
Could it not be the microswitch that detects the OH closing? That's what I am trying to figure out by watching the messages, but there are too many.

kimmoli 2015-01-26 10:34
Re: Jolla OtherHalf OLED display / toholed
 
Quick debugs...

check this before and after attaching a TOH:
The number of interrupts should increase (if not, the microswitch is broken)
Code:
cat /proc/interrupts | grep toh
This should say Active, running. If not TOHD daemon is not running.
Code:
devel-su systemctl status tohd
Then while attaching a TOH, keep this running, it should print something. If not, NFC is not detected.
Code:
dbus-monitor --system | grep -A 2 TOHID

pichlo 2015-01-26 13:47
Re: Jolla OtherHalf OLED display / toholed
 
Thanks, kimmoli! That's exactly what I was after.
The results:
  1. The interrupts were going up. Quite a lot when I was just fiddling with the switch with a screwdriver, only by one when I attached and detached a TOH.
  2. The tod daemon is running and active. I killed it on Friday to see what happens and it restarted on its own so the uptime is since Friday but it is active.
  3. Something happens when I run dbus-monitor but I am not sure what to make out of it. For completeness, I also ran it without grep and here is (a part of) the output:

Code:
signal sender=:1.7 -> dest=(null destination) serial=46 path=/com/jolla/tohd; interface=org.freedesktop.DBus.Properties; member=PropertiesChanged
  string "com.jolla.tohd"
  array [
      dict entry(
        string "Docked"
        variant            int32 1
      )
  ]
  array [
  ]
signal sender=:1.7 -> dest=(null destination) serial=47 path=/com/jolla/tohd; interface=org.freedesktop.DBus.Properties; member=PropertiesChanged
  string "com.jolla.tohd"
  array [
      dict entry(
        string "Ready"
        variant            int32 1
      )
      dict entry(
        string "TOHID"
        variant            string ""
      )
  ]
  array [
  ]
Am I right to assume that TOHOLED does not need NFC anyway? I can live quite happily without swapping ambiences ;)

kimmoli 2015-01-26 13:50
Re: Jolla OtherHalf OLED display / toholed
 
Seems that there is still something wrong with NFC antenna...

Quote:
Originally Posted by pichlo (Post 1458255)
Am I right to assume that TOHOLED does not need NFC anyway? I can live quite happily without swapping ambiences ;)
TOHOLED needs NFC for installing the software automatically from Jolla server.
You can ofc manually install the package, and it will work as expected.

kimmoli 2015-01-28 08:49
Re: Jolla OtherHalf OLED display / toholed
 
For manual updates, package can be downloaded from mer-obs:

http://repo.merproject.org/obs/home:....1.armv7hl.rpm

After installing this, you'll need to say ONLY FOR MANUAL UPDATES
and then remove and re-attach toholed.
Code:
systemctl --user restart ambienced
or as root
Code:
systemctl-user restart ambienced

kimmoli 2015-01-28 14:39
Re: Jolla OtherHalf OLED display / toholed
 
HEP

Update is now released in store.

Problem is that package name changed (hopefully it is final now).

This why you need to uninstall toholed (from Store > My applications), then remove Toholed from the phone, and attach it again.
You should see popup for installing it. Click it.

----
Manual installation as per above instructions.

juiceme 2015-01-28 16:09
Re: Jolla OtherHalf OLED display / toholed
 
Hmmh, just thinking;

I removed toholed, installed the cover and let system download the package from store.
However, now as I check it looks like not all packets are installed, however the OLED display works;

Code:
[root@Jolla nemo]#
[root@Jolla nemo]# zypper se toholed
Loading repository data...
Reading installed packages...

S | Name                        | Summary                  | Type 
--+-----------------------------+---------------------------+--------
i | harbour-ambience-toholed    | The OtherHalf OLED        | package
  | harbour-toholed            | The OtherHalf OLED daemon | package
  | harbour-toholed-settings-ui | Toholed settings UI      | package
[root@Jolla nemo]#

stampsmurf 2015-01-28 18:40
Re: Jolla OtherHalf OLED display / toholed
 
where and how can i order one?

kimmoli 2015-01-28 19:18
Re: Jolla OtherHalf OLED display / toholed
 
Quote:
Originally Posted by juiceme (Post 1458532)
Hmmh, just thinking;
However, now as I check it looks like not all packets are installed,
Code:
i | harbour-ambience-toholed 
  | harbour-toholed           
  | harbour-toholed-settings-ui
This is just as it should be. New package harbour-ambience-toholed is named according to new rules, and this single package contains everything (it Obsoletes those two other packages)

:eek:-------------------------------------------------------:eek:

Quote:
Originally Posted by stampsmurf (Post 1458557)
where and how can i order one?
Send me PM, or email toho at saunalahti fi
Will give you more details.
(If you don't hear from me, reply might be gone to trash or somewhere, as i reply from different address)


All times are GMT. The time now is 10:22.
Page 39 of 45 « First 293738 39 4041 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8