maemo.org - Talk
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   General (https://talk.maemo.org/forumdisplay.php?f=7)
-   -   Mplayer Volume (https://talk.maemo.org/showthread.php?t=18163)

overfloat 2009-09-22 01:43
Re: Mplayer Volume
 
you can also use the ALSA mixer if you have EasyDebian to drive the volume higher - increase 'DMA' a little - too high and it will be dangerous

YoDude 2009-09-22 02:13
Re: Mplayer Volume
 
Quote:
Originally Posted by wartstew (Post 331021)
I think a got it at least partially figured out.
(see previous post)

The culprit was /home/user/.mplayer/sdl.volume

it is a text file and it was set to 17. I changed it to 100 and everything mplayer is loud and clear. I was able to turn off the software volume control and audio filter in the mplayer.conf file and it is still nice an loud.

Question: What UI program tends to mess with this value? As far as I'm concerned it should remain at 100% and i can use the master Maemo volume control to turn things down from there as needed.

I only "see" mplayerplug-in.types and mplayerplug-in.conf in /home/user/.mplayer/

GeraldKo 2009-09-22 03:02
Re: Mplayer Volume
 
Quote:
Originally Posted by YoDude (Post 331113)
I only "see" mplayerplug-in.types and mplayerplug-in.conf in /home/user/.mplayer/
Me, too. (Nothing like "sdl.volume")

YoDude 2009-09-22 11:22
Re: Mplayer Volume
 
Quote:
Originally Posted by GeraldKo (Post 331148)
Me, too. (Nothing like "sdl.volume")

In /etc/mplayer/
adding the following to the bottom of the file, mplayer.conf

Code:
softvol=yes
softvol-max=600
audio-delay=yes
audio-delay=10
solved my volume issue and I have been good to go ever since. :)

I think I found that^ bit in our WiKi at one time.

GeraldKo 2010-03-04 21:31
Re: Mplayer Volume
 
Quote:
Originally Posted by Bundyo (Post 158165)
softvol=1
softvol-max=200

EDIT: Tried it - works.

or with filter if you wish:
af=volume=10.1:0
What is this optional filter meant to do? Any tweaking of the numbers advisable?

(Also, I suppose softvol=1 is the same as softvol=true. And the max numbers you just experiment with. I tried softvol-max=1400 as suggested here, and, wow, it resulted in lots of distortion even at low volume.)


All times are GMT. The time now is 06:52.
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8