Re: Re Flashed N900 - Yay - But Help
 

any help please?

Re: Re Flashed N900 - Yay - But Help
 

What's the output from "df -h" now? Is it still failing to mount the eMMC partitions?

Re: Re Flashed N900 - Yay - But Help
 

It doesn't recognize the USB? When only minutes earlier it installed the firmware ok :(

When it did mount the emmc, it rebooted ok, yet the memory was only 70MB free.

the out put from dh is still the same as I earlier posted.

It's fustrating as my phone is as much use as a brick.

Re: Re Flashed N900 - Yay - But Help
 

Tried everything, but still get the awaiting USB and then Error Code 1 message. To me, it should be simple, yet the whole thing is flawed as some devices work but this method, others do not. Flashes ok, but the EMMC just awaits the USB and then Error. Still got low memory, yet surely it should have a factory reset facility that works.

Re: Re Flashed N900 - Yay - But Help
 

All I can suggest is using another OS to flash the eMMC - a bootable linux distribution for example.

Re: Re Flashed N900 - Yay - But Help
 

It sounds to me like you are reading the rootfs memory. 70 mb is about right for that.

Re: Re Flashed N900 - Yay - But Help
 

Any suggestions, have tried on XP and Vista, OS flashes fine, but the EMMC - error 1.

I am trying again, and if no success, back to Nokia :(

Re: Re Flashed N900 - Yay - But Help
 

I had problems trying to flash the eMMC on XP as well. I used a bootable linux CD (e.g. Ubuntu) and it flashed first time from there.

Re: Re Flashed N900 - Yay - But Help
 

I am going to send it back to Nokia today, I am not happy at all.
The device was working superbly, and I was always careful what I put on etc. Then it rebooted, and kept on rebooting.