maemo.org - Talk
Page 4 of 77 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)
-   -   Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45! (https://talk.maemo.org/showthread.php?t=61338)

Changegames 2010-08-29 11:27
Re: Nitdroid today, auto-installer and 1st impression
 
i got 16gb class 4 sandisk it worked for me, what i like about nitdroid once the phone function works and all IM's im switching to it for dailly use, its not bad to use portrait mode with keyboard on nitdroid... tnx for the devs workin on it.

Mengs 2010-08-29 11:27
Re: Nitdroid today, auto-installer and 1st impression
 
Quote:
Originally Posted by rolan900d (Post 801347)
Fixed my issues....
After the error the mmc was umount so gone....
After reboot it worked and after that all was good...
My other mistake was this:



I actually used the < > symbols!!!
Do you mind explaining step 3?

I have an 8gb card, so I should use 6100... but do I put in all the , and whatnot?

I'd really appreciate instructions on what to type into xterminal and be done with it =)

Thanks!

rolan900d 2010-08-29 11:28
Re: Nitdroid today, auto-installer and 1st impression
 
Quote:
Originally Posted by cloudstrife1ph (Post 801350)
how long is the installation?

mine's stuck at "formatting /dev/mmcblk1p2 (ext3)"
That was stated in the first post!

Exit x-terminal, reboot, and choose normal startup
Then go here:

and follow steps 1 through 5

Then in x-terminal type: nitdroid

There you go

rolan900d 2010-08-29 11:29
Re: Nitdroid today, auto-installer and 1st impression
 
Quote:
Originally Posted by Mengs (Post 801354)
Do you mind explaining step 3?

I have an 8gb card, so I should use 6100... but do I put in all the , and whatnot?

I'd really appreciate instructions on what to type into xterminal and be done with it =)

Thanks!
Check my post above

All is smooth on my Sandisk 16 GB (used the numbers 14100)

GEONXT 2010-08-29 11:34
Re: Nitdroid today, auto-installer and 1st impression
 
You can only get a limited amount of apps at the moment, think its something at googles end! No phone no mic and no dedicated menu button yet. But it looks great!

Mengs 2010-08-29 11:39
Re: Nitdroid today, auto-installer and 1st impression
 
Quote:
Originally Posted by rolan900d (Post 801355)
That was stated in the first post!

Exit x-terminal, reboot, and choose normal startup
Then go here:



and follow steps 1 through 5

Then in x-terminal type: nitdroid

There you go
Thanks! in the future, if I don't want nitdroid anymore how to get rid of it and dual boot?

do I just format sd or is there a different way to get rid of dualboot?

Thanks!

xuggs 2010-08-29 11:40
Re: Nitdroid today, auto-installer and 1st impression
 
Quote:
Originally Posted by Mengs (Post 801361)
Thanks! in the future, if I don't want nitdroid anymore how to get rid of it and dual boot?

do I just format sd or is there a different way to get rid of dualboot?

Thanks!
http://forum.nitdroid.com/index.php?....msg467#msg467

mr_xzibit 2010-08-29 11:45
Re: Nitdroid today, auto-installer and 1st impression
 
Step 1: Partitioning
followed this
sudo gainroot

umount /dev/mmcblk1p1

sfdisk -uM /dev/mmcblk1 << EOF,2100MB,C,,L,,,,EOF

sfdisk:bad input

what am i doing wrong?

got a 4gig card btw

heres what xterm said

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # umount /dev/mmcblk1p1
/home/user # sfdisk -uM /dev/mmcblk1 << EOF
> ,2100 MB,C
> ,,L
> ,,
> ,,
> EOF
Checking that no-one is using this disk right now ...
OK

Disk /dev/mmcblk1: 121008 cylinders, 4 heads, 16 sectors/track
Old situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/mmcblk1p1 0+ 3781- 3782- 3872248 b W95 FAT32
/dev/mmcblk1p2 0 - 0 0 0 Empty
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
trailing junk after number

sfdisk: bad input

kevinp93 2010-08-29 11:51
Re: Nitdroid today, auto-installer and 1st impression
 
Well, I installed Nitdroid the other day using the Autoinstaller and it is not very difficult.

Here is the step by step instruction.

It is recommended that you disable the 'extra-devel' in maemo, as the installer from that repo has errors. For more info visit this thread.

:)

xuggs 2010-08-29 11:53
Re: Nitdroid today, auto-installer and 1st impression
 
Quote:
Originally Posted by mr_xzibit (Post 801365)
Step 1: Partitioning
followed this
sudo gainroot

umount /dev/mmcblk1p1

sfdisk -uM /dev/mmcblk1 << EOF,2100MB,C,,L,,,,EOF

sfdisk:bad input

what am i doing wrong?

got a 4gig card btw

heres what xterm said

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # umount /dev/mmcblk1p1
/home/user # sfdisk -uM /dev/mmcblk1 << EOF
> ,2100 MB,C
> ,,L
> ,,
> ,,
> EOF
Checking that no-one is using this disk right now ...
OK

Disk /dev/mmcblk1: 121008 cylinders, 4 heads, 16 sectors/track
Old situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/mmcblk1p1 0+ 3781- 3782- 3872248 b W95 FAT32
/dev/mmcblk1p2 0 - 0 0 0 Empty
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
trailing junk after number

sfdisk: bad input
Use the autoinstaller and it will partition for you automatically.


All times are GMT. The time now is 09:41.
Page 4 of 77 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8