maemo.org - Talk
Page 4 of 23 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)
-   -   [Testers needed] USB Hostmode prealpha for the N900 (https://talk.maemo.org/showthread.php?t=62787)

WhiteWolf 2010-09-23 18:55
Re: [Testers needed] USB Hostmode prealpha for the N900
 
By connecting pendrive displays the following error message:

>> Can not connect, no file system available

Still shows the drive / dev/sda1 and therefore can not mount it.

MohammadAG 2010-09-23 19:02
Re: [Testers needed] USB Hostmode prealpha for the N900
 
If you got that error message, host mode worked, check ls /dev/sd* for a list of devices to mount, currently it's hardcoded to /dev/sda1

WhiteWolf 2010-09-23 19:09
Re: [Testers needed] USB Hostmode prealpha for the N900
 
Quote:
Originally Posted by MohammadAG (Post 824648)
If you got that error message, host mode worked, check ls /dev/sd* for a list of devices to mount, currently it's hardcoded to /dev/sda1
Already mentioned that the storage device goes into "USB mass storage."

But in the path "/dev/" is not a device "/dev/sd *"

Thank you very much for the effort they are doing.

ivyking 2010-09-23 20:14
Re: [Testers needed] USB Hostmode prealpha for the N900
 
Quote:
Originally Posted by MohammadAG (Post 824592)
How are you testing voltage, is i2c-tools installed, does anything like Permission denied show in the terminal window?
testing voltage using a multimeter-meter while load is connected, i have i2c-tools installed , and no errors are shown in terminal .

zenecho 2010-09-23 20:14
Re: [Testers needed] USB Hostmode prealpha for the N900
 
Quote:
Originally Posted by flexxxv (Post 824515)
btw:
is it normal that i get after "executing pcsuite-enable.sh":
sh: 0: unknown operand

I get the same error - using a powered USB Drive

celebrant 2010-09-23 20:39
Re: [Testers needed] USB Hostmode prealpha for the N900
 
So I tried it too and unfortunately my USB flash drive wasn't recognized. But the good news is, that the script indeed enabled 5V output (measured 5.05 V using a voltmeter) so when I tried connecting a mouse the light turned on... but nothing showed up in dmesg (new usb device should be mentioned in dmesg, right?).

http://fileshare.cqproject.net/files/syslog

aligatro 2010-09-23 21:30
Re: [Testers needed] USB Hostmode prealpha for the N900
 
Can't connect flash drive right now to check, but definitely get 5 volts. I plugged it into usb hub and and flashcard lit up after I switched to host-mode. So only, storage usb devices are detected for now or we can can connect keyboards,etc ?

pantera1989 2010-09-23 22:05
Re: [Testers needed] USB Hostmode prealpha for the N900
 
Can anyone confirm if this cable works?

http://www.amazon.com/USB-Micro-Fema...279420&sr=1-65

MohammadAG 2010-09-23 22:22
Re: [Testers needed] USB Hostmode prealpha for the N900
 
Quote:
Originally Posted by WhiteWolf (Post 824655)
Already mentioned that the storage device goes into "USB mass storage."

But in the path "/dev/" is not a device "/dev/sd *"

Thank you very much for the effort they are doing.
Can you apt-get install sysklogd, reboot, and try to reproduce what worked for you? ty

As for the error from pcsuite-enable.sh, it can be ignored, it's just lazy coding by Nokia.

And again, @ others, connect the flash drive directly after Starting BME is shown, and no more than after Connect the device NOW is shown.

WhiteWolf 2010-09-23 22:25
Re: [Testers needed] USB Hostmode prealpha for the N900
 
I'll try and communicate the results, thanks.


All times are GMT. The time now is 08:11.
Page 4 of 23 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8