![]() |
Re: N900 Will not work in Mass Storage after PR1.3
Quote:
Quote:
Code:
flasher-3.5 -F <firmware-image> --flash-only=kernel -f -R Each repository holds software, there may be different versions of the same software in each repo. The higest version of kernel-power to be accepted to testing was v42, therefore you will only get v43+ if you enable the devel repository. |
Re: N900 Will not work in Mass Storage after PR1.3
Quote:
Anywho, thanks for the help but im unsure where to enter the above commands, do i need some software on my PC to do this? EDIt i re-read my last post, what i ment was, what sofware that i put on my phone would have caused this? Im unsure IF any devel software i would have put on it :S Edit- Just flashed phone to go with a fresh start,. Took all the stuff off of it that i had on so i dont have any devel stuff on there. Craig Craig |
Re: N900 Will not work in Mass Storage after PR1.3
Edit....Sorry
|
Re: N900 Will not work in Mass Storage after PR1.3
Happened again. After fiddling a lot with usb hostmode, mass storage mode doesn't work anymore.
Reflashed kernel-power ver.45, still no joy. Phone doesn't react at all when connecting the usb cable. Flashed MohammedAG kernel-power ver.40 + hostmode, now mass storage works. Transferring files... Reflashed again kernel-power ver.45. Again, no mass storage mode. Reflashed stock kernel pr1.3. Mass storage works. And now... reflashed power-kernel v.45, and... mass storage works again! [Of course, while doing all this mess, my optfs got corrupted. Thank you, Robbiethe1st with your backupmenu]. What's going on here? EDIT: after a while, mass storage is again kaputt. Now trying to leave the phone without its battery for ten minutes. See what happens then. EDIT2: Geez, that worked. So, there is a cure. Good. |
Re: N900 Will not work in Mass Storage after PR1.3
With power-kernel ver.45, when usb mass storage doesn't work, and I connect the usb cable, dmesg outputs
Code:
twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2 Code:
twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1 |
Re: N900 Will not work in Mass Storage after PR1.3
back to square one i am now.
I did waht you said, i have not longer got the devel resporitory. Reflashed my phone and put power kernel back on (not the devel one) - no mass storage again :( |
Re: N900 Will not work in Mass Storage after PR1.3
Quote:
|
Re: N900 Will not work in Mass Storage after PR1.3
Another way I found to restore mass storage is briefly connect the power supply.
See also here |
Re: N900 Will not work in Mass Storage after PR1.3
Just a quick note on this incase anyone is still having problems. I found a way to do it today just trying some random things while waiting on pc suite to download onto my wife's laptop.
So- close what windows you can ( I still had a browser window open anyway though), do a sudo gainroot in x-term, then do killall browserd. After this mass storage worked straight away. I apologise if this is old news, but even if it is there are likely people who it may help to see this incase they need the help. |
Re: N900 Will not work in Mass Storage after PR1.3
I'll try your browserd trick next time my mass storage runs amok, thanks. I've had results also leaving the n900 without its battery for 90 (!) (no less!) minutes.
|
All times are GMT. The time now is 11:11. |
vBulletin® Version 3.8.8