Re: [Announce] Smartcam Maemo 5 Port
 

Any ideas, ive installed all the lib files seem to have done everything right opened ports on my pc, i have the smartcam app opened on PC and N900 soon as i hit start, i see the app on the pc say connected for like 0.1 seconds then the app on n900 closes down...

Re: [Announce] Smartcam Maemo 5 Port
 

home/user # mono /etc/smartcam-m5/smartcam-m5.exe

Unhandled Exception: System.Net.Sockets.SocketException: Connection refused
at System.Net.Sockets.Socket.Connect (System.Net.EndPoint remote_end) [0x00000]
at System.Net.Sockets.TcpClient.Connect (System.Net.IPEndPoint remote_end_point) [0x00000]
at System.Net.Sockets.TcpClient.Connect (System.Net.IPAddress[] ipAddresses, Int32 port) [0x00000]
/home/user #

Re: [Announce] Smartcam Maemo 5 Port
 

on windows, open up command prompt and type ipconfig, paste the output.
what ip/port are you connecting with (from n900), in smartcam on the PC go file > settings and check the port is the same.

Make sure youve got your wifi enabled, or if your doing it over usb, make sure thats all working right. brbrb, going to pie shop, be back in 15 minutes.

Re: [Announce] Smartcam Maemo 5 Port
 

This is what i get connecting from 3G connetion

ome/user # mono /etc/smartcam-m5/smartcam-m5.exe

Unhandled Exception: System.ComponentModel.Win32Exception: Cannot find the specified file
at System.Diagnostics.Process.Start_shell (System.Diagnostics.ProcessStartInfo startInfo, System.Diagnostics.Process process) [0x00000]
at System.Diagnostics.Process.Start_common (System.Diagnostics.ProcessStartInfo startInfo, System.Diagnostics.Process process) [0x00000]
at System.Diagnostics.Process.Start (System.Diagnostics.ProcessStartInfo startInfo) [0x00000]
at System.Diagnostics.Process.Start (System.String fileName) [0x00000]
at MainWindow.transport () [0x00000]
/home/user #

Re: [Announce] Smartcam Maemo 5 Port
 

Nah i know all about IP address and networking,

My Local machine PC is 10.0.0.1

Ive enable 9361 Port to my router so in smart cam i go 10.0.0.1:9361

Im connected to Wifi on both PC and N900 on windows smartcam i see it connected for like 1 second no video not enough time but it does say connected and then the app closes down on the n900..

Re: [Announce] Smartcam Maemo 5 Port
 

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 20-CF-30-08-0D-3C
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::80ea:f1db:53fa:91fe%11(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.138
DHCPv6 IAID . . . . . . . . . . . : 237031216
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-59-AA-C9-20-CF-30-08-0D-3C

Re: [Announce] Smartcam Maemo 5 Port
 

Do you have gstreamer installed? The local part seems to have a problem with how your network is setup, dont know why.

If its giving a file not found over 3g, that would be at the line where it tries to run gst-launch.

Re: [Announce] Smartcam Maemo 5 Port
 

well in a link on the first page i install like 8 lib and mono files dpkg them all that went fine i thought gstreamer was part of those?

Re: [Announce] Smartcam Maemo 5 Port
 

I thought gstreamer was installed by default on the n900;
try
then type gst-inspect, if it shows output then its installed.

Re: [Announce] Smartcam Maemo 5 Port
 

Oh my, installed gstreamer-tools i now can see myself thank you so much mate much appreciated