Re: fremantle on other platforms
 

I have seen this but missed the omappedia wiki link about beagle board.
Thanks!

However this generate more questions.
Are there already somewhere kernel patches which are needed for Maemo5?
Are there already somewhere kernel patches to get Nokia SGX module running?
Are there already somewhere kernel patches for gst-dsp?

The beagle kernel and defconfig link are no more valid.
Does somebody can upload them for me?

So which would be the best choice for the basement kernel development, start with pali's and patching for a1 or start with a1 and patching maemo/Nokia SGX?

Ok it would make life easier when it goes to Neo900.
However I like the idea to have another device, which is not only for hacking and development and runs maemo.

So I can't use binary stuff from N900 for the first try?

Re: fremantle on other platforms
 

I guess we could get Fremantle running on N9/50 if we had a decent kernel runing there, see the N9/N950 upstreaming force.

Re: fremantle on other platforms
 

Unpatched mainline kernels are already bootable on the N900. Whilst I personally haven't tried booting Maemo, others have. Have a look at http://elinux.org/N900 and http://elinux.org/N900/Changelog for a recent (last updated in August) status. For Maemo, you need to enable CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2. I recommend using Pali's kernel which is more complete as it includes extra patches that are yet to be mainlined. The two SYSFS options are already enabled in Pali's config.

Pali's kernel includes the SGX patches. I believe the user space SGX drivers from Maemo should just work on the N900. If you find they don't work on other platforms, you may want to look at http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/. v4 is needed for X11 as support was dropped in v5.

Pali's kernel includes some DSP patches. The tidspbridge driver used to be in mainline but it got removed because it was broken (see the elinux.org page).

felipec did the gst-dsp user space work for both the N900 and N9 at Nokia I believe. I don't know if it got upstreamed. If not, have a look here:

https://github.com/felipec/gst-dsp

I would start with Pali's kernel but if you have trouble booting it, take a vanilla mainline kernel which I would expect to work without hardware video acceleration. I guess you could work either way, it's a case of personal preference really.

Sounds great!

By all means give it a try!

Re: fremantle on other platforms
 

gst-dsp and gst-omapfb were added to buildroot but not sure if they were upstreamed yet. However they were removed when gst-ffmpeg was replaced by gst-libav as they are not available for gstreamer-1.0.

http://lists.busybox.net/pipermail/b...ry/041215.html
http://lists.busybox.net/pipermail/b...ry/041217.html
http://lists.busybox.net/pipermail/b...er/078765.html