|
Re: Developer Mode Alternative?
I cannot install almost any packages from the mirrors, because they seem to be depending on older versions of packages that the system has installed. Example:
Code:
~ # apt-get install libtimed-dev |
Re: Developer Mode Alternative?
you can't do it on phone. this is the reason why HASDK and SDK for PC exists.
|
Re: Developer Mode Alternative?
Hello helping angels.
I am a big fun of N9. I have 3 of them but unfortunatelly only one has developer mode enabled since old good times when nokia provided support. My need is only regarding changing the volume settings via the volume-up app. But i can't install it anymore since i do not have the developer mode enabled. I tried editing it on my computer but i cannot copy it back in the right place because of acces rights issues. I created a backup from the N9 with the enabled dev mode, and then tried to restore that backup on the other device. I didn't get a mirrored N9, most of the stuff asking for additional downloads. I read this topic and tried different approaches, but i was not able to enable the developer mode. I cannot install Ancelad's repository. I get an "Instalation aborted" message everytime. I was not able to install Coderus's hack either. On almost all of the attemts to install something i get "instalation aborted". It looks like i can install stuff taht do not write on the preotected memory zone of the device. Can you please write a small tutorial, with chronological steps, in order to succesefully enable the dev mode? I am a noob, with no expertize in kernel and other stuff. Many thanks in advance. |
Re: Developer Mode Alternative?
Have you tried re-flashing device software first, so starting with "vanilla" device? Should be able to use Lumia Software recovery tool if Harmattan flasher a problem.
Set up two N9 & an N950 from scratch by following > enable non-store installations > ancelad repo > developer mode > utilities > qtweakall > warehouse recently |
Re: Developer Mode Alternative?
No. I did not try reflashing the phone.
Thanks for the tip and for the sequence described. I will reflash the phone and than try the sequence described by you. And, of course i post here the results. |
Re: Developer Mode Alternative?
For some reason I can't seem to install python-pyside. I can see it in coderus repo, but for some reason apt only want to get it from the old nokia ones. I have repomirror installed, even tried reinstalling it and editing repos manually to no avail.
Code:
~ # apt-get install python-pyside |
Re: Developer Mode Alternative?
Quote:
Here is successful outcome upon newly re-flashed N9 following > enable non-store installations > ancelad repo > developer mode > utilities > coderus aegis hack > qtweakall > warehouse. Not quite sure to what perl warning about setting locale appertains. BusyBox v1.20.0.git (MeeGo 3:1.20-0.2+0m8) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ $ devel-su Password: BusyBox v1.20.0.git (MeeGo 3:1.20-0.2+0m8) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # apt-get install python-pyside Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libpyside1.0 libpython2.6 libreadline5 libshiboken1.0 python python-minimal python-pyside.phonon python-pyside.qtcore python-pyside.qtdeclarative python-pyside.qtgui python-pyside.qtnetwork python-pyside.qtopengl python-pyside.qtscript python-pyside.qtsql python-pyside.qtsvg python-pyside.qtwebkit python-pyside.qtxml python-support python2.6 python2.6-minimal readline-common Suggested packages: python-doc python-tk python-profiler python2.6-doc python2.6-profiler binutils binfmt-support The following NEW packages will be installed: libpyside1.0 libpython2.6 libreadline5 libshiboken1.0 python python-minimal python-pyside python-pyside.phonon python-pyside.qtcore python-pyside.qtdeclarative python-pyside.qtgui python-pyside.qtnetwork python-pyside.qtopengl python-pyside.qtscript python-pyside.qtsql python-pyside.qtsvg python-pyside.qtwebkit python-pyside.qtxml python-support python2.6 python2.6-minimal readline-common 0 upgraded, 22 newly installed, 0 to remove and 9 not upgraded. Need to get 13.7MB of archives. After this operation, 42.5MB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 https://coderus.openrepos.net ./ readline-common 5.2-2maemo4+0m6 [51.2kB] Get:2 https://coderus.openrepos.net ./ libreadline5 5.2-2maemo4+0m6 [146kB] Get:3 https://coderus.openrepos.net ./ python2.6-minimal 2.6.6-6maemo3+0m6 [1596kB] Get:4 https://coderus.openrepos.net ./ python2.6 2.6.6-6maemo3+0m6 [2404kB] Get:5 https://coderus.openrepos.net ./ libpython2.6 2.6.6-6maemo3+0m6 [1178kB] Get:6 https://coderus.openrepos.net ./ python-minimal 2.6.6-3+squeeze4-1maemo2+0m6 [33.8kB] Get:7 https://coderus.openrepos.net ./ python 2.6.6-3+squeeze4-1maemo2+0m6 [66.0kB] Get:8 https://coderus.openrepos.net ./ libshiboken1.0 1.0.7-1maemo1+0m6 [177kB] Get:9 https://coderus.openrepos.net ./ libpyside1.0 1.0.7-1maemo2+0m6 [194kB] Get:10 https://coderus.openrepos.net ./ python-support 1.0.8maemo5+0m6 [33.9kB] Get:11 https://coderus.openrepos.net ./ python-pyside.qtcore 1.0.7-1maemo2+0m6 [1027kB] Get:12 https://coderus.openrepos.net ./ python-pyside.qtgui 1.0.7-1maemo2+0m6 [3837kB] Get:13 https://coderus.openrepos.net ./ python-pyside.phonon 1.0.7-1maemo2+0m6 [406kB] Get:14 https://coderus.openrepos.net ./ python-pyside.qtnetwork 1.0.7-1maemo2+0m6 [462kB] Get:15 https://coderus.openrepos.net ./ python-pyside.qtdeclarative 1.0.7-1maemo2+0m6 [260kB] Get:16 https://coderus.openrepos.net ./ python-pyside.qtopengl 1.0.7-1maemo2+0m6 [253kB] Get:17 https://coderus.openrepos.net ./ python-pyside.qtscript 1.0.7-1maemo2+0m6 [237kB] Get:18 https://coderus.openrepos.net ./ python-pyside.qtsql 1.0.7-1maemo2+0m6 [306kB] Get:19 https://coderus.openrepos.net ./ python-pyside.qtsvg 1.0.7-1maemo2+0m6 [177kB] Get:20 https://coderus.openrepos.net ./ python-pyside.qtwebkit 1.0.7-1maemo2+0m6 [347kB] Get:21 https://coderus.openrepos.net ./ python-pyside.qtxml 1.0.7-1maemo2+0m6 [347kB] Get:22 https://coderus.openrepos.net ./ python-pyside 1.0.7-1maemo2+0m6 [114kB] Fetched 13.7MB in 24s (556kB/s) perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Selecting previously deselected package readline-common. (Reading database ... 49268 files and directories currently installed.) Unpacking readline-common (from .../readline-common_5.2-2maemo4+0m6_all.deb) ... Selecting previously deselected package libreadline5. Unpacking libreadline5 (from .../libreadline5_5.2-2maemo4+0m6_armel.deb) ... Selecting previously deselected package python2.6-minimal. Unpacking python2.6-minimal (from .../python2.6-minimal_2.6.6-6maemo3+0m6_armel.deb) ... Selecting previously deselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.6-6maemo3+0m6_armel.deb) ... Selecting previously deselected package libpython2.6. Unpacking libpython2.6 (from .../libpython2.6_2.6.6-6maemo3+0m6_armel.deb) ... Selecting previously deselected package python-minimal. Unpacking python-minimal (from .../python-minimal_2.6.6-3+squeeze4-1maemo2+0m6_all.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.6.6-3+squeeze4-1maemo2+0m6_all.deb) ... Selecting previously deselected package libshiboken1.0. Unpacking libshiboken1.0 (from .../libshiboken1.0_1.0.7-1maemo1+0m6_armel.deb) ... Selecting previously deselected package libpyside1.0. Unpacking libpyside1.0 (from .../libpyside1.0_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-support. Unpacking python-support (from .../python-support_1.0.8maemo5+0m6_all.deb) ... Selecting previously deselected package python-pyside.qtcore. Unpacking python-pyside.qtcore (from .../python-pyside.qtcore_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtgui. Unpacking python-pyside.qtgui (from .../python-pyside.qtgui_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.phonon. Unpacking python-pyside.phonon (from .../python-pyside.phonon_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtnetwork. Unpacking python-pyside.qtnetwork (from .../python-pyside.qtnetwork_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtdeclarative. Unpacking python-pyside.qtdeclarative (from .../python-pyside.qtdeclarative_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtopengl. Unpacking python-pyside.qtopengl (from .../python-pyside.qtopengl_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtscript. Unpacking python-pyside.qtscript (from .../python-pyside.qtscript_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtsql. Unpacking python-pyside.qtsql (from .../python-pyside.qtsql_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtsvg. Unpacking python-pyside.qtsvg (from .../python-pyside.qtsvg_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtwebkit. Unpacking python-pyside.qtwebkit (from .../python-pyside.qtwebkit_1.0.7-1maemo2+0m6_armel.deb) ... Selecting previously deselected package python-pyside.qtxml. Unpacking python-pyside.qtxml (from .../python-pyside.qtxml_1.0.7-1maemo2+0m6_armel.deb) ... aegis-installing readline-common (from 'com.nokia.maemo') aegis-installing libreadline5 (from 'com.nokia.maemo') aegis-installing python2.6-minimal (from 'com.nokia.maemo') aegis-installing python2.6 (from 'com.nokia.maemo') aegis-installing libpython2.6 (from 'com.nokia.maemo') aegis-installing python-minimal (from 'com.nokia.maemo') aegis-installing python (from 'com.nokia.maemo') aegis-installing libshiboken1.0 (from 'com.nokia.maemo') aegis-installing libpyside1.0 (from 'com.nokia.maemo') aegis-installing python-support (from 'com.nokia.maemo') aegis-installing python-pyside.qtcore (from 'com.nokia.maemo') aegis-installing python-pyside.qtgui (from 'com.nokia.maemo') aegis-installing python-pyside.phonon (from 'com.nokia.maemo') aegis-installing python-pyside.qtnetwork (from 'com.nokia.maemo') aegis-installing python-pyside.qtdeclarative (from 'com.nokia.maemo') aegis-installing python-pyside.qtopengl (from 'com.nokia.maemo') aegis-installing python-pyside.qtscript (from 'com.nokia.maemo') aegis-installing python-pyside.qtsql (from 'com.nokia.maemo') aegis-installing python-pyside.qtsvg (from 'com.nokia.maemo') aegis-installing python-pyside.qtwebkit (from 'com.nokia.maemo') aegis-installing python-pyside.qtxml (from 'com.nokia.maemo') aegis-installing python-pyside (from 'com.nokia.maemo') Selecting previously deselected package python-pyside. Unpacking python-pyside (from .../python-pyside_1.0.7-1maemo2+0m6_all.deb) ... Processing triggers for applauncherd-launcher ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Setting up readline-common (5.2-2maemo4+0m6) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Setting up libreadline5 (5.2-2maemo4+0m6) ... Setting up python2.6-minimal (2.6.6-6maemo3+0m6) ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Linking and byte-compiling packages for runtime python2.6... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Setting up python2.6 (2.6.6-6maemo3+0m6) ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Setting up libpython2.6 (2.6.6-6maemo3+0m6) ... Setting up python-minimal (2.6.6-3+squeeze4-1maemo2+0m6) ... Setting up python (2.6.6-3+squeeze4-1maemo2+0m6) ... Setting up libshiboken1.0 (1.0.7-1maemo1+0m6) ... Setting up libpyside1.0 (1.0.7-1maemo2+0m6) ... Setting up python-support (1.0.8maemo5+0m6) ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Setting up python-pyside.qtcore (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtgui (1.0.7-1maemo2+0m6) ... Setting up python-pyside.phonon (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtnetwork (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtdeclarative (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtopengl (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtscript (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtsql (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtsvg (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtwebkit (1.0.7-1maemo2+0m6) ... Setting up python-pyside.qtxml (1.0.7-1maemo2+0m6) ... Setting up python-pyside (1.0.7-1maemo2+0m6) ... Processing triggers for python-support ... Updating desktop entries... Done ~ # |
Re: Developer Mode Alternative?
Any idea how to fix my problem apart from reflashing? ^^
|
Re: Developer Mode Alternative?
delete default repository
|
Re: Developer Mode Alternative?
Removing /etc/apt/sources.list.d/aegis.ssu-keyring-*.list files fixed this, thanks! \o/
|
| All times are GMT. The time now is 05:45. |
vBulletin® Version 3.8.8