maemo.org - Talk - [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Page 4 of 4

Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)

- Applications (https://talk.maemo.org/forumdisplay.php?f=41)

- - [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers (https://talk.maemo.org/showthread.php?t=68002)

tehowe

2011-01-25 20:56

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Ok, though there aren't any reliable WEP sources near my local Second Cup to test association on, I can confirm that everything up to that point worked for me once sudser was installed.

If you try airmon-ng on the command line and see something about a missing "iw", ignore it, installing iw uninstalls aircrack-ng.

Good news about the coming GUI! Though the ASCII interface is cool in its own right :)

Quote:

Originally Posted by tehowe (Post 928294)

'uboot-pr13 conflicts with kernel-power' I'm told, while running dpkg on the first deb file in the tutorial.

I'll just remove uboot and try again , but heads up to anyone wanting to use lxp's modded driver - it looks like multiboot may not work alongside the patched kernel that you need to install.

Edit: Removed that package and proceeding with install tutorial ok. There's still some kind of multiloader screen at bootup, so maybe an earlier version than pr1.3

Edit2: Finished tutorial, checked uname -r and power kernel is there but running load.sh doesn't seem to bring the patched kernel online: the output of airmon-ng start wlan0 indicates driver wl12xx and it returns an error reading... ERROR: Neither the sysfs interface linksnor the iw command is available. And then it says I need to download iw. Very well, ok.

I installed bash3 but using sudo gainroot to run these commands, which drops Xterminal back into BusyBox.

Radicalz38

2011-01-25 21:27

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by leetut (Post 927636)

to learn, and because i donated, i also have the right to do what i want with my device without asking permission from people with more linux experience than me

and i dont know who Faheem is, or why he blew his lid, infact ive never even seen that name before, but i can certainly see why n00bs joining the forum get a lot of grief!

p.s. i dont know what a vFAT partition is, i dont want to know and i dont need to know

anyway thanks for your help, it was greatly appreciated, ive learned so much from you that i feel a special bond towards you now:rolleyes:

I'd have to disagree with this kind of statement :( Seriously all of these are needed and you have to learn it all. You can't learn algebra without learning how to use addition, subtraction, multiplication & division and same goes for learning extraction on linux without learning permissions and filesystems.
just FYI linux !=(not equals) windows so file permission algorithms are different...
vfat = windows while ext = linux
extracting a linux file with permission to an unsupported filesystem will lose it's permissions for it's necessary filesystem which in result would make it unable to be executed/accessed.

Verssetti

2011-01-27 08:29

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by HtheB (Post 914062)

Step 5:
This step is only needed if you have multiboot on your N900 (credits goes to stlpaul):

Code:

/home/user/MyDocs/wl1251-maemo/binary/kernel-power # cd /boot

/boot # mv zImage-2.6.28-maemo46-wl1 multiboot/vmlinuz-2.6.28.10power46-wl1

if you haven't installed leafpad type:

Code:

/boot # apt-get install leafpad

Next, create the file /etc/multiboot.d/01-Maemo-2.6.28.10power46-wl1.item using leafpad:

Code:

/boot # leafpad /etc/multiboot.d/01-Maemo-2.6.28.10power46-wl1.item

and write this into leafpad:

Code:

ITEM_NAME="Maemo 2.6.28.10power46-wl1"

ITEM_KERNEL=2.6.28.10power46-wl1

ITEM_MODULES=ext3

save the file

Power off and boot your phone again while the keyboard is slide open.
Select the kernel from the boot list:
Maemo 2.6.28.10power46-wl1

break the phone restart loop all time, i can't select the kernel but don't see the boot list, restart, restart and restart, help me please.

futtawuh

2011-01-27 21:40

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Well I too got the "Cant flash kernel, required files not found guru meditation #00000025.62017712.

Guess ill flash back to stock tomorrow;<

Swirnoff

2011-01-27 22:14

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Would 2.6.28.10power42 be sufficient?

Cause I can't find power46 with regular repository enabled, nor does it show up in updates.

leetut

2011-01-29 14:30

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by hawaii (Post 927857)

You might find learning a bit easier, if you actually tried, instead of copying and pasting stuff you found on the internet.

hmm strange that im running almost every other n900 mod on my device without problems
and ive never had any problems copy/pasting the commands mohammadAG posts in his threads
they all do exactly what he said they would, first time without issues

stevomanu

2011-01-29 14:42

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

i see what you mean lee !!

no need really

ashboy87

2011-01-29 18:42

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

i've already donated using paypal but nothing shows up after i proceed with the payment. am i suppose to receive the download link through my paypay email?

ashboy87

2011-01-29 18:47

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

can anyone help me please? I've made the donation but I have no idea how I'm suppose to get the link. I'm stucked at paypal page after making the payment.

stevomanu

2011-01-30 14:52

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by ashboy87 (Post 931442)

can anyone help me please? I've made the donation but I have no idea how I'm suppose to get the link. I'm stucked at paypal page after making the payment.

time maybe lxp aint checked email yet , you link will arrive dont worry

turbowei

2011-01-31 00:57

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

hmm, I am not against selling software for money, but then, please don't use "Donate", it is "Selling".

Saturn

2011-01-31 23:34

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by turbowei (Post 932237)

hmm, I am not against selling software for money, but then, please don't use "Donate", it is "Selling".

He is rather using the "pay what you want" model temporarily just because he felt he was speaking to a community that could understand the importance of his contribution. "Donate" is most probably there because it is customary to be used with paypal and open source developers.

At the same time, he has made the source available and he has contacted and passed the code to the kernel developers to be included for free in future versions.

Sorry for the off-topic, just wanted to mention that in case some people didn't read the whole story.

FRuMMaGe

2011-02-03 16:26

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Just in case anyone is interested, I've made a GUI called fAircrack that makes using Aircrack much simpler.

Link Here

xur17

2011-02-05 01:11

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Is there a way to make this driver load by default on boot instead of having to run load.sh?

bleu_huh

2011-02-06 09:38

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by xur17 (Post 936494)

Is there a way to make this driver load by default on boot instead of having to run load.sh?

the driver will drain your batery from full to flat around 3 to 4 hours even when n900 is in standby

M_Scofield

2011-02-08 16:08

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Hi, guys I am having a bit of a problem here.
I did everything step by step, selected the kernel from the boot list:
Maemo 2.6.28.10power46-wl1 and then loaded the driver, but when I type - "aireplay-ng -3 -b [MAC of the access point] -h [MAC of the wifi card] wlan0" - the program starts with (got 0 ARP requests and 0 ACRS send 0 packets) :(((((
Please help me out !!

topet2k12001

2011-02-09 22:56

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Hi Friends,

Thought I might share this one as well. Hope this helps. :) http://www.symbianize.com/showpost.p...1&postcount=32

M_Scofield

2011-02-11 09:51

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Thanks but I am not able to register and see the whole info, there is a Verification Question like: A-no ang hu-gis ng pak-wan?

topet2k12001

2011-02-13 01:47

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by M_Scofield (Post 941873)

Thanks but I am not able to register and see the whole info, there is a Verification Question like: A-no ang hu-gis ng pak-wan?

Sorry. :) It's a website from the Philippines. :D The question is written in Filipino/Tagalog (our language)...it reads: What is the shape of a watermelon? The answer is cirlce (in Filipino: bilog).

I can register an account for you to save you the hassle if you want. :) I can initially put in a default password (something like 12345678 or whatever) and I'll just send you the completed profile. Please note though that most of the people there write in Filipino/Tagalog; in my case I always strive to use English.

Anyway let me do it just the same (register an account for you); I'll just use your same username that you are using here as your username for that site.

NOMIOMI

2011-02-18 12:08

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

when i type this command

/home/user/MyDocs/wl1251-maemo/binary/kernel-power # cd /boot
/boot # mv zImage-2.6.28-maemo46-wl1 multiboot/vmlinuz-2.6.28.10power46-wl1

mv:can not rename zimage-2.6.28-maemo46-wl1 no such file or directory

any solution plz

CooL_HunK

2011-04-07 01:13

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Guys plz help me with this... the problem I have is:
insmod: error inserting 'compat.ko': -1 Invalid module format
and it follows with error
'rfkill_backport.ko': -1 Invalid module format,
'cfg80211.ko': -1 Invalid module format,
'mac80211.ko': -1 Invalid module format,
'wl1251.ko': -1 Invalid module format,
'wl1251_spi.ko': -1 Invalid module format
ifconfig SIOCGIFFLAGS: No such device

first I tried this without installing the osso-wlan drivers and after installing them also but after I did a reboot on installating those drivers. :( plzz help me..:(:confused:

CooL_HunK

2011-04-09 19:29

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

can any1 help me plzzz :(

rx7	2011-04-09 19:57

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

try looking for "faircrack" there is a excellent post detailing eveyrhing and it has gui

http://talk.maemo.org/showthread.php?t=69009

i found it for you

and it works!

windows7

2011-05-27 09:11

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by CooL_HunK (Post 983364)

Nothing in this thread helped, and while many here were able to install many of the tools i just couldn't get anything to work...
last night i finally managed to resolve the issue and some other issues, see this:
http://talk.maemo.org/showthread.php...08#post1016408

abyn900

2011-06-26 18:51

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Quote:

Originally Posted by HtheB (Post 914704)

First post updated :)

(I think I just have to make a how to video with my N900 to show how it works....)

Have you put up the video yet...?? pls do put it...!!
It will be a easy task for all of us...!!

tonypower88

2011-06-26 18:57

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

can you please upload the file zImage-2.6.28-maemo46-wl1 under boot folder?

because I removed it long time ago due to rootfs size , I want to use it for multiboot

TridenTia

2011-08-28 15:05

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

sorry for the n00b question

can the following guide be done without the use of a usb cable ?

using the microsd card or wireless to transfer files?

Thanks,
David

khanobravo

2012-06-19 14:10

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

Please help me with this. i cannot do the installation. please help me asap i shall be grateful.

sifo	2012-06-19 14:31

Re: [TUTORIAL] How to use aircrack-ng with the bleeding-edge wifi drivers

@khanobravo

how can we help you if you didnt tell us what is exactly the problem and the error and what you did to have that !

./sifo

samirkonrad

2012-07-05 14:49

Abruption

I've followed all the steps successfully but the video on the subject is not clear, please explain the development of graphic and clear, or another video

All times are GMT. The time now is 02:05.

Page 4 of 4

« First

< Prev

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8