maemo.org - Talk - SailfishOS 2.0 Nexus5 based on CM13 alpha release

maemo.org - Talk (https://talk.maemo.org/index.php)

- SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)

- - SailfishOS 2.0 Nexus5 based on CM13 alpha release (https://talk.maemo.org/showthread.php?t=99377)

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

Quote:

Originally Posted by claustn (Post 1551648)

Well, this is what happens updating immediately without some testing, it is just not worth it.

I got the volume patch working after all. The situation is still same. I can't hear anything when I play media but I can hear typing sounds. Also, the camera is not working.

Nexus 5 is not my daily driver so no worries. I can flash 3.0.0.8 image
again and start from scratch. Others did not have any issues on the other thread.
https://talk.maemo.org/showthread.ph...23#post1551623

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

I would reflash to 3.0.0.8 and wait until 3.0.1 arrives. Maybe they changed some things in 3.0.0.11 which need some changes to the Nexus 5 packages. I'll check that when 3.0.1.x EA is out.

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

At last i got my nexus 5 from ebay and installed 3.0.0.8 on it right away, but it has some issue. It does not go to suspend. I ran enabled and started this service like in the first post but still devices will not suspend
devel-su systemctl enable bt-sleep-monitor.timer
devel-su systemctl start bt-sleep-monitor.timer

How does 3.0.0.8 work for you guys? Did you had this issue?

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

Quote:

Originally Posted by matemana (Post 1551751)

I ran enabled and started this service like in the first post but still devices will not suspend
devel-su systemctl enable bt-sleep-monitor.timer
devel-su systemctl start bt-sleep-monitor.timer

First off, congratulations on your new Nexus 5. It's a wonderful device when it runs SailfishOS. ;)

To answer your question, I never had that problem - that is if I understand you correctly. What exactly did you install on top of mautz' image?

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

Quote:

Originally Posted by dubliner (Post 1551752)

Thank you! I have installed only Storeman, htop, keyboard for my native language (which i made myself) that's it. Looks like warehouse does not work on newer versions of SFOS. I want to look into aliendalvik. It runs on CM12 base but not CM13 on this device. Other devices have aliendalvik working on base 13. I think it can be run on nexus 5 too.

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

@matemana

Coukd you or someone else post the output of 'devel-su systemctl status bt-sleep-monitor.service' '?

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

Quote:

Originally Posted by mautz (Post 1551789)

@matemana

Coukd you or someone else post the output of 'devel-su systemctl status bt-sleep-monitor.service' '?

â bt-sleep-monitor.service - Start Minimecs bt-sleep-monitor script at startup
Loaded: loaded (/lib/systemd/system/bt-sleep-monitor.service; disabled; vendor preset: enabled)
Active: active (exited) (Result: exit-code) since Wed 2018-12-19 23:25:23 EST; 21s ago
Process: 12311 ExecStart=/usr/bin/bt-sleep-monitor start (code=exited, status=203/EXEC)
Main PID: 12311 (code=exited, status=203/EXEC)
CGroup: /system.slice/bt-sleep-monitor.service

Dec 19 23:25:23 Sailfish systemd[1]: Started Start Minimecs bt-sleep-monitor script at startup.
Dec 19 23:25:23 Sailfish systemd[1]: bt-sleep-monitor.service: Main process exited, code=exited, status=203/EXEC

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

Thanks, seems like it is not working correctly. On my Nexus5 the file /usr/bin/bt-sleep-monitor had some formatting errors. I don't know where they came from...but could someone check the content of /usr/bin/bt-sleep-monitor and compare it with https://raw.githubusercontent.com/ma...-sleep-monitor ?

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

Quote:

Originally Posted by mautz (Post 1551902)

but could someone check the content of /usr/bin/bt-sleep-monitor?

If this is the formatting issue you mentioned, I think I got it, too.

Code:

$ diff bt-sleep-monitor /usr/bin/bt-sleep-monitor

3c3,4

< #description     : Bluetooth 'LowPowerMode' monitor for SailfishOS ports that face a bluetooth wakelock bug.

---

> #description     : Bluetooth 'LowPowerMode' monitor for SailfishOS ports 

> that face a bluetooth wakelock bug.

8c9,10

< #notes           : Can be used as standalone program or as systemd service

---

> #notes           : Can be used as standalone program or as systemd 

> service

10c12,13

< #How it works... : A dbus-monitor process is listening for different dbus events in parallel:

---

> #How it works... : A dbus-monitor process is listening for different 

> dbus events in parallel:

14,18c17,26

< #                  When an event is triggered the program will decide whether to enable/disable 

< #                  or temporarily disable bluetooth suspend (low power mode).

< #                  If bluetooth is powered and in low power mode, a display event will disable suspend mode for a given time.

< #                  In case there is no bluetooth connection after that time, suspend mode is enabled again. See $BTACTIVE.    

< #Monitor...      : After having launched the script in a console, you can follow a log, as long the console stays open. 

---

> #                  When an event is triggered the program will decide 

> whether to enable/disable 

> #                  or temporarily disable bluetooth suspend (low power 

> mode).

> #                  If bluetooth is powered and in low power mode, a 

> display event will disable suspend mode for a given time.

> #                  In case there is no bluetooth connection after that 

> time, suspend mode is enabled again. See $BTACTIVE.    

> #Monitor...      : After having launched the script in a console, you 

> can follow a log, as long the console stays open. 

23c31,32

< BTPOWER=$(connmanctl technologies | sed -n -e '/bluetooth/,+5p' | grep Powered | awk '{print $3; exit}')

---

> BTPOWER=$(connmanctl technologies | sed -n -e '/bluetooth/,+5p' | grep 

> Powered | awk '{print $3; exit}')

52c61,62

<     if [ "$BTPOWER" == "True" ] && [ "$BTCONNECT" == "" ] && [ "$SLEEPTIMER" == "0" ] ; then

---

>     if [ "$BTPOWER" == "True" ] && [ "$BTCONNECT" == "" ] && [ 

> "$SLEEPTIMER" == "0" ] ; then

84c94,95

<     WATCH1="path='/net/connman/technology/bluetooth',interface='net.connman.Technology',member='SetProperty'"

---

>     

> WATCH1="path='/net/connman/technology/bluetooth',interface='net.connman.Technology',member='SetProperty'"

86c97,98

<     WATCH3="interface='com.nokia.mce.signal',member='display_status_ind'"

---

>     

> WATCH3="interface='com.nokia.mce.signal',member='display_status_ind'"

104c116,117

<     pkill -P $(cat /var/run/bt-sleep-monitor.pid) && rm /var/run/bt-sleep-monitor.pid

---

>     pkill -P $(cat /var/run/bt-sleep-monitor.pid) && rm 

> /var/run/bt-sleep-monitor.pid

113c126,127

<        echo Bluetooth Sleep Monitor is running, pid=`cat /var/run/bt-sleep-monitor.pid`

---

>        echo Bluetooth Sleep Monitor is running, pid=`cat 

> /var/run/bt-sleep-monitor.pid`

123c137,138

< # check for a command switch and call different functionality if it is found

---

> # check for a command switch and call different functionality if it is 

> found

Re: SailfishOS 2.0 Nexus5 based on CM13 alpha release

Yes, that is exactly what i meant, don't know why this happened. Just copy the correct script from the github link and restart the service, that should fix it.