Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Hi Freemangordon,i think the largest problem that comes with new libglibs is than gps become unusable,I tried almost all libgilbs,but result it's the same,if someone is managed to wake up gps,let share it.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Works ok for me here, no idea what your problem might be

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Sorry, still segfault at start with new libglib2. Stock libglib2 works with either leafpad.

Edit: I might even try debugging with new gdb (;)) later to find what's going on but not before about 9pm tonight due to family reasons.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Correct :(

But it segfaults on another place this time, seems leafpad is buggy as hell :(

main.c, on line 385, ifactory is uninitialized.

****, this become a leafpad support thread. Anyway, going to push a fixed version in the autobuilder

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

installed latest ibglib2 and installed latest leafpad on previous post but its still giving segmentation fault.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

latest is http://repository.maemo.org/extras-d...emo3_armel.deb

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Bingo! That one works fine with new libglib.

Icidentally, isn't CSSU-Thumb based on CSSU-Testing? The way I interpret it is that Thumb is always one step behind Testing. Does this new libglib put it ahead of Testing? Not that I am complaining, quite the opposite. But I thought I'd make sure I am on the right track.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Well, there is no new metapackage in the repo, so this new glib is not "released" in a way :).

Yep, you got it right, -thumb is supposed to follow -testing. But cssu-testing maintainer is a bit busy for a couple of months, with no clean idea when he'll be available. So for some time -thumb will be ahead of -testing.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

i can confirm that latest Leafpad uploaded by fmg is working fine with latest libglib. thanks FMG.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Wouldn't it be better to promote to TESTING and follow the whole testing, voting and quarantine procedure and THEN promote to extras (so, in fact, adding you as the maintainer to enable pushing for you)? That would require only as much "playing God" as necessary ;)

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Would it be? The same QA that allowed such a stupid bugs to pass unnoticed? For a package the maintainer of which doesn't care anymore? Not to say I *don't* want to be a maintainer of leafpad.

However, fixed leafpad is in -stable, so the above is rather rhetorical :)

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

I also suffer this problem.
After the last thumb update, Sygic can't lock anymore.
I don't think it's a-gps problem, because I have updated certman.
And I get "Verified OK" when I run this command:

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Works for me, sygic locks in 5-10 seconds

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

I had a similar issue after update. gps icon pulsing in status menu but no fix, with or without a-gps (tested with location-test). Reboot solved mine. Problem is this was noticed a few days after update and I have no recollection if I rebooted before that....

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

I'm not sure if these messages were there before update... but syslog reports:

drive[1601]: GLIB DEBUG liblocation - location_gpsd_control_start_internal:1254 application method set to 0xc
drive[1601]: GLIB CRITICAL ** GLib - g_ptr_array_foreach: assertion `array' failed

...but after some time you can obtain a fix.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

gps working fine for me too with latest libglib

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Reboot didn't solve mine, it still can't get a fix.
But when I try to get a route to a location, Sygic almost immidiately get a fix on my current location.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Just tried again, with both location widget and sygic, both got a fix in seconds.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

new update is out (21.2011.38-1Tmaemo8.3+thumb2) see first page for the changelog.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Thank you freemangordon, now my gps get a fix within seconds

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

i can confirm gps working here.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

i have a problem with trackerd.
With newer glib it can't reindex the files and update the database.

If the database /home/user/.local/share/tracker/data/common.db does not exists, tracker does not create a new one.
(also the log /home/user/.local/share/tracker/trackerd.log remains untouched)

To confirm the issue, it's the second time i go back to glib 2.22.4 and tracker starts working again.

As soon as i downgrade glib(also without reboot), trackerd can run again restarting the daemon.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

[QUOTE=xes;1385766]i have a problem with trackerd.
With newer glib it can't reindex the files and update the database.

If the database /home/user/.local/share/tracker/data/common.db does not exists, tracker does not create a new one.
(also the log /home/user/.local/share/tracker/trackerd.log remains untouched)

To confirm the issue, it's the second time i go back to glib 2.22.4 and tracker starts working again.

As soon as i downgrade glib(also without reboot), trackerd can run again restarting the daemon.[

the same...

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Everything looks fine here after upgrade. How exactly did you confirm that trackerd doesn't work?

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

I have changed/moved a few media files, forced a trackerd rebuild db.
Result: ZERO files available. (no images, no video, no music)

reboot, rebuild db... ZERO files (also no tracked-indexer process = no cpu load)

downgrade glib ....rebuild db ok, tracked-indexer process with usual cpu load. All fine

- then second try.
Upgraded glib. Reboot. Forced trackerd to rebuild the db. nothing... no process, no db, no log, no cpu load.
Downgrade glib. Force rebuild... high cpu load, process present, logs updated and db updated in some minute.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

@xes:
Nokia-N900:/root$ tracker-processes -r
Found 166 pids...
Found process ID 1476 for 'trackerd'
Killed process 1476
Found process ID 4158 for 'tracker-indexer'
Killed process 4158
Setting database locations
Checking database directories exist
Checking database version
Checking database files exist
Removing all database files
Removing database:'/home/user/.local/share/tracker/data/common.db'
Removing database:'/var/tmp/tracker-user/cache.db'
Removing database:'/home/user/.cache/tracker/file-meta.db'
Removing database:'/home/user/.cache/tracker/file-contents.db'
Removing database:'/home/user/.cache/tracker/email-meta.db'
Removing database:'/home/user/.cache/tracker/email-contents.db'
Setting index database locations
Checking index directories exist
Checking index files exist
Removing all database index files
Removing database index:'/home/user/.cache/tracker/file-index.db'
Removing database index:'/home/user/.cache/tracker/email-index.db'

[syslog]
Nov 12 14:00:25 Nokia-N900 maemo-launcher[6486]: invoking '/usr/bin/mediaplayer.launch'
Nov 12 14:00:26 Nokia-N900 maemo-launcher[6486]: opening of /usr/bin/mediaplayer.launch took 360260 usec
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB DEBUG Tracker - Checking XDG_DATA_HOME is writable and exists
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB MESSAGE Tracker - XDG_DATA_HOME set to '/home/user/.local/share'
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB DEBUG Tracker - Path is OK
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB MESSAGE Tracker - Setting IO priority
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB MESSAGE Tracker - Setting up stopword list for language code:'en'
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB MESSAGE Tracker - Tracker couldn't read stopword file:'/usr/share/tracker/languages/stopwords.en', Failed to open file '/usr/share/tracker/languages/stopwords.en': open() failed: No such file or directory
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB MESSAGE Tracker - Setting up stemmer for language code:'en'
Nov 12 14:00:30 Nokia-N900 trackerd[6489]: GLIB MESSAGE Tracker - Registering DBus service... Name:'org.freedesktop.Tracker'
Nov 12 14:00:31 Nokia-N900 pulseaudio[996]: module-bluetooth-discover.c: dead: 0, device_connected: 1, audio_state: 2, audio_source_state: -1, headset_state 2
Nov 12 14:00:31 Nokia-N900 pulseaudio[996]: module-bluetooth-discover.c: dead: 0, device_connected: 1, audio_state: 2, audio_source_state: -1, headset_state 2
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB DEBUG Tracker - Checking XDG_DATA_HOME is writable and exists
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB MESSAGE Tracker - XDG_DATA_HOME set to '/home/user/.local/share'
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB DEBUG Tracker - Path is OK
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB MESSAGE Tracker - Setting IO priority
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB MESSAGE Tracker - Setting process priority
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB MESSAGE Tracker - Setting up stopword list for language code:'en'
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB MESSAGE Tracker - Tracker couldn't read stopword file:'/usr/share/tracker/languages/stopwords.en', Failed to open file '/usr/share/tracker/languages/stopwords.en': open() failed: No such file or directory
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB MESSAGE Tracker - Setting up stemmer for language code:'en'
Nov 12 14:00:33 Nokia-N900 tracker-indexer[6493]: GLIB MESSAGE Tracker - Registering DBus service... Name:'org.freedesktop.Tracker.Indexer'
Nov 12 14:00:42 Nokia-N900 trackerd[6489]: GLIB WARNING ** Tracker - Could not add monitor for path:'/home/user/MyDocs/.camera'
Nov 12 14:00:43 Nokia-N900 trackerd[6489]: GLIB CRITICAL ** Tracker - Could not open directory 'file:///home/user/MyDocs/.camera': No such file or directory
Nov 12 14:00:46 Nokia-N900 trackerd[6489]: GLIB CRITICAL ** Tracker - Could not open directory 'file:///media/mmc1p2/lost+found': Permission denied
Nov 12 14:00:46 Nokia-N900 trackerd[6489]: GLIB CRITICAL ** Tracker - Could not open directory 'file:///media/mmc1p4/lost+found': Permission denied

I see no problem here, my tracker database got rebuild after some time.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

@freemangordon

upgraded again glib and:
[root@N900 ~]# tracker-processes -r
Found 171 pids...
Found process ID 2589 for 'trackerd'
Killed process 2589
Found process ID 3389 for 'tracker-indexer'
Killed process 3389
Setting database locations
Checking database directories exist
Checking database version
Checking database files exist
Could not find database file:'/root/.local/share/tracker/data/common.db'
One or more database files are missing, a reindex will be forced
Removing all database files
Removing database:'/root/.local/share/tracker/data/common.db'
Removing database:'/var/tmp/tracker-root/cache.db'
Removing database:'/root/.cache/tracker/file-meta.db'
Removing database:'/root/.cache/tracker/file-contents.db'
Removing database:'/root/.cache/tracker/email-meta.db'
Removing database:'/root/.cache/tracker/email-contents.db'
Setting index database locations
Checking index directories exist
Checking index files exist
Could not find index file:'/root/.cache/tracker/file-index.db'
Could not find index file:'/root/.cache/tracker/email-index.db'
Removing all database index files
Removing database index:'/root/.cache/tracker/file-index.db'
Removing database index:'/root/.cache/tracker/email-index.db'

# after 10 seconds:
[root@N900 ~]# ps aux|grep -i track
user 1834 0.0 0.6 15492 1520 ? Ss 11:31 0:00 /usr/bin/mafw-dbus-wrapper mafw-tracker-source
root 3868 0.0 0.2 2608 556 pts/1 S+ 14:08 0:00 grep -i track



[root@N900 ~]# tracker-processes -r
Found 169 pids...
Setting database locations
Checking database directories exist
Checking database version
Checking database files exist
Could not find database file:'/root/.local/share/tracker/data/common.db'
One or more database files are missing, a reindex will be forced
Removing all database files
Removing database:'/root/.local/share/tracker/data/common.db'
Removing database:'/var/tmp/tracker-root/cache.db'
Removing database:'/root/.cache/tracker/file-meta.db'
Removing database:'/root/.cache/tracker/file-contents.db'
Removing database:'/root/.cache/tracker/email-meta.db'
Removing database:'/root/.cache/tracker/email-contents.db'
Setting index database locations
Checking index directories exist
Checking index files exist
Could not find index file:'/root/.cache/tracker/file-index.db'
Could not find index file:'/root/.cache/tracker/email-index.db'
Removing all database index files
Removing database index:'/root/.cache/tracker/file-index.db'
Removing database index:'/root/.cache/tracker/email-index.db'

# syslog - NO TRACKER MSG
# /home/user/.local/share/tracker/trackerd.log - NO UPDATE since the glib upgrade

EDIT:
I think i have found the problem.
It happens with new glib when tracker-indexer finds the file:
/usr/share/tracker/languages/stopwords.en
empty, 0 byte.


[root@N900 ~]# /usr/lib/tracker/tracker-indexer
Initializing tracker-indexer...
Writing default configuration to file:'/root/.config/tracker/tracker.cfg'
Segmentation fault

[root@N900 ~]# strace /usr/lib/tracker/tracker-indexer
.....
.....
open("/usr/share/tracker/languages/stopwords.en", O_RDONLY|O_LARGEFILE) = 8
fstat64(8, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
close(8) = 0
gettimeofday({1384262189, 42878}, NULL) = 0
stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=951, ...}) = 0
stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=951, ...}) = 0
stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=951, ...}) = 0
send(3, "<10>Nov 12 14:16:29 tracker-inde"..., 116, MSG_NOSIGNAL) = 116
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
Segmentation fault


Removing stopwords.en or adding a few spaces inside seems to solve the problem but does not explain the different behavior with new glib..

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Maybe a bug in tracker, will try to reproduce it.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

@xes: wait, why do you stop/rebuild tracker db as root? You should do that as user.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

@freemangordon

yep. i know. It was a lapsus.
All tests were mere in a proper way.
(for example also restarting from tracker-cfg)

user@N900 ~$ /usr/lib/tracker/tracker-indexer
Initializing tracker-indexer...
Segmentation fault

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

please, is there something that i can do to get this last update without messing up my system ? Any hint will be really apreciated.
thanks

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

And why FFS you have -dev packages installed on yo ur device? Just uninstall them.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

I dont know how those packages got into my device :D
Seriously, im trying to learn to compile packages só i have gcc installed. I'll check if it arent dependêncies
Thanks again FMG and sorry for bother with silly questions.:)

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

so far no tracker problem here with latest glib. forced tracker to rebuild database via tracker-cfg app and everything went fine.

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Could it be related to something other which tracker uses? Like external plugin (ogg? or other media format support from extras?)?

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

The problem is in that glib commit:
https://git.gnome.org/browse/glib/co...8a6a1a26425301

I am still undecided whether to patch glib or to fix trackerd


EDIT:
By grepping through / for g_mapped_file_get_contents and by looking in the code of the binaries that call it, it seems only trackerd does not handle that NULL value, I'll leave it as it is for now, if there are no more problems with glib, I'll fix trackerd

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

I have a question. The last two CSSU Thumb2 upgrades on my N900 have not rebooted cleanly. I am currently upgrading to the release from yesterday, and it has had a blank screen, and it has been blank for the last 20 minutes. The last time, I rebooted, cringing the whole while. Earlier upgrades rebooted cleanly after the install.

Am I missing something?

Thanks,
--vr

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

For the record, I did have to manually reboot, and it did come back. I left it sit for about 45 minutes, and it stayed at a blank screen.

Is something wrong with my N900? Did I install some piece of software that might be causing it?

Thanks,
--vr

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

try turning it on with opened keyboard

Re: [ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900
 

Another small update is out, changelog in the first post