Re: Overclock the N900?
 

That method is depreciated.
To set ideal as default you do the following in x-term:
You can replace ideal with the name of your chosen config.

If you want to return to stock, do the following:
Hope that helps

Re: Overclock the N900?
 

Does anybody know of any issue where wifi switcher causes the phone to reset? This even happens without overclocking/undervolting, just by using this kernel.
Yesterday I managed to use wifi switcher, today the phone restarts when activating it.

Re: Overclock the N900?
 

Hi pefur - after one day using wifi switcher (oc with v40; ideal; 900) no restart so far; maybe you have some other apps installed causing this problem in combination with titan's kernel... good luck anyway.

Re: Overclock the N900?
 

hello

Thanks for all the information on this page, most usefull,

I have over clocked to 850 (using the 3 lines in x term) all works just fine and have added QB and the stock button to go back to 600 just in case

I would like to add a ideal button as well but not at 1000 but at 850

If i understand rightly I can do :

1. Launch xterminal
2. Sudo gainroot
3. kernel-config load lv
4. kernel-config limits 250 850
5. kernel-config save ideal_850

Then in snippet _ideal_1000 I just rename load ideal_1000 to load ideal_850 (ligne 27)

Is this all Ok before I try it ?

I may of missed something completely here as a noob to Linux, so please bare with me

many thanks

Re: Overclock the N900?
 

Hi all, i have a couple of questions.

I install the power kernel settings, reboot and open xterminal, type sudo gainroot, then type kernel-config show, and gives me this error: "this kernel version 2.6.20-omap1 is not supported. Please make sure that kernel-power is installed and running. If you have just installed the kernel, you need to shutdown an boot to active it"

How i boot and activate it?

I have rebooted my n900, then opened xterminal and follow the lines in the tutorial several times. I have reinstalled the power kernel settings and rebooted again, but xterminal is still showing the same error message every time.... i searched and didn't find a solution, so please help.

Many Thanks in advance!

EDIT:
P.D. i have installed multiboot and nitdroid, and the sock kernel

Re: Overclock the N900?
 

Install kernel power.

You have to have kernel power and kernel power settings installed, 2 separate packages.

Re: Overclock the N900?
 

I have installed via xterm this packages:kernel-power_2.6.28-maemo40_armel.deb, kernel-power-flasher_2-6-28-maemo40_armel.deb, kernel-power-modules_2.6.28-maemo40_armel.deb and kernel-power-settings_0.11_armel.deb and other time via application manager

Re: Overclock the N900?
 

I had same problem , had titan v37 and nitroid flying world / multiboot v2.5 , all worked fine until i upgraded to titan v40 , exactly same errors as kishan regardless of installing from xterm or ham , reinstall etc etc , i downgraded back to titan v37 and all is working again , unlucky v40 gives errors to some but is because it seems nitroid/multiboot wont work with v40 wait for new versions i reckon though if anyone kmows solution please share :)

Re: Overclock the N900?
 

You don't need the flasher to OC using Titans kernel.

Can I suggest that you read through the wiki on over clocking before you actually do anything, everything is explained in there.

If you have kernel for power users and kernel for power users settings installed and your phone has been rebooted, you can do the following in the terminal (provided you have rootsh installed) :
You have now successfully overclocked your phone.

To make it permanent
You can change the min/maximum frequencies by doing the following:
Where 250 is the minimum frequency and 1000 is the maximum frequency.

To save this new config:
Where myconfig is the name or path of the configuration file to be created

You can then make this the default by using the code above.

Have fun.

You might want to look at 'Transition Control' in the repos, it makes such a difference to the speed of the UI.

Re: Overclock the N900?
 

Hey there, I have had no problems with accelerometer/autorotation and i am running v40.

In fact, my accelerometer is annoying me in that it goes portrait whenever i vaguely turn my N900 :rolleyes: