Re: [Announce] Pierogi - a universal infrared remote control app
 

Request: I have a thomson tv but i cant find any remote for thomson tvs. If its possible to add a thomson remote I will be very pleased :)

Re: [Announce] Pierogi - a universal infrared remote control app
 

I will put Thomson on my list. :)

Re: [Announce] Pierogi - a universal infrared remote control app
 

@Copernicus: Can I request YORK air-conditioners to the list and I also have a Nokia Satellite Decoder box that needs a remote control... :p

Re: [Announce] Pierogi - a universal infrared remote control app
 

Another one for your list: telenet (Belgium) digital tv boxes (digicorder).

Found some info:
http://www.hifi-remote.com/forums/vi...510c1113a1783e

Re: [Announce] Pierogi - a universal infrared remote control app
 

York looks hard; I'm not finding any codes for it (or for the other name for the brand, Acson). The Nokia satellite box looks like it has a better chance, there are a few config files on the hifi-remote site; I'll put them on the list. :)

Re: [Announce] Pierogi - a universal infrared remote control app
 

Ah, this one is using the XMP protocol! I've been working my way up to that (other brands using this protocol have already been requested, such as Dreambox and Thomson). XMP is one heck of a protocol, with a 4-bit pulse encoding, multiple checksums, and a fancy starting-command / continuing-command / ending-command series of frames. A lot more complex than most protocols out there, but very popular with recent hardware... I've started in on it, but I don't know how long it will take to get it all working correctly. :)

Re: [Announce] Pierogi - a universal infrared remote control app
 

Me again,
If I get the codes for Foxtel IQ2 would you add them to your app eventually?
What format do they need to be in? A PCF file? Or text like this
Chhers

Re: [Announce] Pierogi - a universal infrared remote control app
 

@shazosbourne
Another Foxtel Keyset was added in 1.1.0 is this not working for you?

Re: [Announce] Pierogi - a universal infrared remote control app
 

hy,
just used the remote for compro tv-tuner, and i can say it is working.
i have an older tv-tuner, and i wanted to use only the remote for controling computer.

problem is the radius, about 40 cm from receiver.
someone can confirm this problem on another tv-tuner? do we have another remote for tv-tuners?
probably is the weak signal from the phone combined with older tuner technologies which need more signal strenght.

Re: [Announce] Pierogi - a universal infrared remote control app
 

That looks like a Pronto hex file. Decoding Pronto is a pain, but those codes do look to be in the Nokia 32 protocol (a 2-bit encoding), and the code they contain is: 0 2 0 1 2 2 0 0 0 2 1 2 0 0 0 0. Putting these sets of bits into bytes, you come up with the hex value 0x21A02600.

As it turns out, following the protocol, this means the major device number is 0x21A0, the minor device number is 0x26, and the command code is 0x00. And these happen to be the values used for the key "0" in "Foxtel STB Keyset 2", which as sixwheeledbeast mentioned was added in the 1.1.0 version of Pierogi (which you can find in the extras-devel repository).

If that keyset isn't working for you, please let me know! I haven't tested out the Nokia 32 protocol very much yet...