maemo.org - Talk - Overclock the N900?

note also dsp frequency may be changed at higher cpu frequencies. See your config file.

Ihad massive probelms with camera at higher cpu frequecies so limited mine to 750 MHz. I installed syslog and found 'dspbridge' errors when camera did not work.

Mr. Incredible

2010-11-09 21:26

Re: Overclock the N900?

Yes, I tried to raise the voltages too but no success.

My current freqs are: 0:20,90 500:30,360 900:54,500
Avoiding all other frequencies.

titan

2010-11-09 21:27

Re: Overclock the N900?

Quote:

Originally Posted by ahmadamaj (Post 868442)

MohammadAg added USB hostmode to your kernel. Anything about that in v41?

USB hostmode patches are planned for one of the next releases.
First I need to find their latest patches and make sure they don't interfere with normal operation.

ahmadamaj

2010-11-09 21:37

Re: Overclock the N900?

Quote:

Originally Posted by titan (Post 868463)

USB hostmode patches are planned for one of the next releases.
First I need to find their latest patches and make sure they don't interfere with normal operation.

so is it recommended to try his patch or no?

Crashdamage

2010-11-09 21:38

Re: Overclock the N900?

Quote:

Originally Posted by matts76 (Post 867913)

For me the kernel power (settings) were not wiped after OTA firmware update, mine was still installed and all my custom profiles worked

I had to reinstall the kernel-power settings package, but saved profiles are left intact. You didn't reinstall the setting package?

Quote:

...also after pr1.3 both kernel power and settings showed as installed, hence the need to reinstall not install kernel-power

I believe that's incorrect information due to leftovers in the install database, stuff not overwritten by the OTA update. See below.

Quote:

...kernel-power and settings are not wiped at all, the new PR1.3 kernel is just flashed as a replacement, leaving kernel-power installed but not in use.

I'm pretty sure Titan's kernel-power is actually overwritten during the update, replaced by the stock kernel.

Matan

2010-11-09 21:45

Re: Overclock the N900?

Quote:

Originally Posted by Mr. Incredible (Post 868462)

Yes, I tried to raise the voltages too but no success.

My current freqs are: 0:20,90 500:30,360 900:54,500
Avoiding all other frequencies.

Try reducing DSP frequency, instead of upping voltage.

400 should work at voltage 54 (that is the default in Nokia's kernel) and 430 should also be safe.

Mr. Incredible

2010-11-09 22:00

Re: Overclock the N900?

Reducing DSP frequency did't do the job. I played around with the voltages a bit and got it working now with a higher voltage at 500 Mhz :)

FREQS= "0:20,90 500:32,360 900:54,500"

Thank you guys!

joerg_rw

2010-11-09 22:06

Re: Overclock the N900?

Quote:

Originally Posted by titan (Post 868463)

USB hostmode patches are planned for one of the next releases.
First I need to find their latest patches and make sure they don't interfere with normal operation.

We're still on a beta level, and API is prone to change drastically. Not much sense in rushing this

Ah, and - nice to hear of you. Welcome back :-)

cheers
jOERG

MarkyboyUK

2010-11-09 22:23

Re: Overclock the N900?

I had power40 kernel prior to pr1.3 OTA upgrade. If I want to use your power41 will I need to do a reinstall of power40 first and then an upgrade to power 41?
Just to be clear, I have not yet reinstalled power40 since the pr1.3 OTA upgrade.
Thanks

titan

2010-11-09 22:36

Re: Overclock the N900?

Quote:

Originally Posted by hawaii (Post 868440)

@titan any chances of including compat-wireless in a next build?

only if you can tell me how to get it working on the N900...

All times are GMT. The time now is 09:08.

Page 499 of 536

« First

< Prev

489