maemo.org - Talk
Page 5 of 7 « First 34 5 67
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   General (https://talk.maemo.org/forumdisplay.php?f=7)
-   -   How to mount USB CDROM on 2008 OS (https://talk.maemo.org/showthread.php?t=12491)

Benson 2008-02-18 19:42
Re: How to mount USB CDROM on 2008 OS
 
Quote:
Originally Posted by pipeline (Post 114529)
I guess time will tell if having iso image capabilites is of any use for me, but if you do something like offline wikipedia (1-4 gb) it would take forever to copy as thousands of files, so packaging into a single iso image would be much faster and manageable.
You consider using tar? That seems a more natural choice to me...

HaZtile 2008-03-16 20:34
Re: How to mount USB CDROM on 2008 OS
 
Hello guys. I'm another lucky man which can't launch usb cdrom on my n800 tablet.
I've tried 1st time using attached *.deb file, after installation i rebooted device and attach cdrom, then there were two messages the first is that usb device is not supported and the that file system is not supported. After that i ran following commands and got following answers
/home/user # mount /dev/scd0 /root/mnt -t iso9660
mount: mounting /dev/scd0 on /root/mnt failed
/home/user # mount /dev/scd0 /root/mnt -t udf
mount: mounting /dev/scd0 on /root/mnt failed
At second attempt i reupdate software os2008 and launched *.ko files from the command line. The result was the same as in my first attempt.
.
PS I use cd rom Samsung Writemaster SE-TO84L.
Could you pls give me some recommendations?

jamesc760 2008-03-18 18:50
Re: How to mount USB CDROM on 2008 OS
 
Help! I'm having problems installing modules. When I type "insmod cdrom.ko", I'm getting "no such file or directory. Ditto for "insmod /mnt/initfs/lib/modules/2.6.21-omap1/cdrom.ko. Of course I'm root. Where are these modules located? Of course I've installed the cdrom.deb (dkpg -i cdrom.deb) as root.

Thanks in prior to all of your help!

smman 2008-03-22 07:18
Re: How to mount USB CDROM on 2008 OS
 
cdrom.ko and other modules located in this folder:
/usr/lib/
but it's no help for me :-)
The .deb is no work for me.
/sorry for my bad english/

italodance 2008-03-28 07:57
Re: How to mount USB CDROM on 2008 OS
 
did u installed cdrom.deb? has it an icon for menu?

penguinbait 2008-03-29 15:44
Re: How to mount USB CDROM on 2008 OS
 
If this is not working for you? Please provide some output.

dmesg is a command you can run from xterm to get information about whats happening when you plug in the CDROM/DVD

If you installed the deb, you do not need to reboot or do anything you should be good.

make sure the proper modules are loaded, from xterm run:
cat /proc/modules

Please paste your output for:

dmesg

and

cat /proc/modules

penguinbait 2008-03-29 15:46
Re: How to mount USB CDROM on 2008 OS
 
Quote:
Originally Posted by italodance (Post 161364)
did u installed cdrom.deb? has it an icon for menu?
There is no icon for this

HaZtile 2008-03-29 16:26
Re: How to mount USB CDROM on 2008 OS
 
Hi. i've just launched following commands in xterm and got next result.
/home/user # cd /usr/lib
/usr/lib # cat /proc/modules
udf 84964 0 - Live 0xbf077000
isofs 32092 0 - Live 0xbf06e000
sr_mod 13444 0 - Live 0xbf069000
sg 21592 0 - Live 0xbf062000
cdrom 35164 1 sr_mod, Live 0xbf058000
g_file_storage 27560 0 - Live 0xbf050000
cx3110x 56200 0 - Live 0xbf041000
umac 258788 1 cx3110x, Live 0xbf000000 (P)
/usr/lib # dmegs
/bin/sh: dmegs: not found

Could you pls explain what I'm doing wrong?

qwerty12 2008-03-29 16:28
Re: How to mount USB CDROM on 2008 OS
 
It's dmesg not dmegs

HaZtile 2008-03-29 18:09
Re: How to mount USB CDROM on 2008 OS
 
Sorry i made a misprint :) Here is a part of summary what i've got
88465.820312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88738.375000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88743.390625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88871.664062] DSP Pausing failed, skipping OP change!
[89320.726562] DSP Pausing failed, skipping OP change!
[89545.117187] EAC mode: play enabled, rec enabled
[89547.820312] EAC mode: play disabled, rec disabled
[90335.539062] EAC mode: play enabled, rec enabled
[90338.429687] EAC mode: play disabled, rec disabled
[90399.187500] EAC mode: play enabled, rec enabled
[90401.890625] EAC mode: play disabled, rec disabled
[90403.085937] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90403.117187] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90411.578125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90411.781250] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90414.250000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90419.265625] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90430.687500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90436.265625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90449.351562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90454.367187] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90458.421875] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90516.875000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90524.054687] EAC mode: play enabled, rec enabled
[90526.945312] EAC mode: play disabled, rec disabled
[92030.437500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[92035.921875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119456.390625] EAC mode: play enabled, rec enabled
[119459.281250] EAC mode: play disabled, rec disabled
[119499.234375] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119499.507812] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119499.593750] hub 1-0:1.0: state 8 ports 1 chg 0000 evt 0000
[119499.593750] usb usb1: usb auto-resume
[119499.593750] usb usb1: finish resume
[119499.593750] hub 1-0:1.0: hub_resume
[119499.617187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119499.773437] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119499.898437] usb 1-1: new high speed USB device using musb_hdrc and address 2
[119500.031250] usb 1-1: default language 0x0409
[119500.031250] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119500.031250] usb 1-1: Product: USB Mass Storage Device
[119500.031250] usb 1-1: Manufacturer: TSST corp
[119500.031250] usb 1-1: SerialNumber: SET084MP00000002A01
[119500.031250] usb 1-1: device v0409 p0840 is not supported
[119500.031250] usb 1-1: uevent
[119500.031250] usb 1-1: usb_probe_device
[119500.031250] usb 1-1: configuration #1 chosen from 1 choice
[119500.031250] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119500.031250] usb 1-1:1.0: uevent
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface - got id
[119500.046875] scsi0 : SCSI emulation for USB Mass Storage devices
[119500.046875] drivers/usb/core/inode.c: creating file '002'
[119500.046875] hub 1-0:1.0: 198mA power budget left
[119500.046875] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119500.046875] hub 1-0:1.0: port 1 enable change, status 00000503
[119500.054687] usb-storage: device found at 2
[119500.054687] usb-storage: waiting for device to settle before scanning
[119500.101562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.062500] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119505.140625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.812500] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119505.812500] Uniform CD-ROM driver Revision: 3.20
[119505.812500] sr 0:0:0:0: Attached scsi CD-ROM sr0
[119505.812500] sr 0:0:0:0: Attached scsi generic sg0 type 5
[119505.859375] usb-storage: device scan complete
[119506.007812] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119511.070312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119527.960937] EAC mode: play enabled, rec enabled
[119530.664062] EAC mode: play disabled, rec disabled
[119673.242187] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[119673.390625] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[119674.718750] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119674.992187] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119674.992187] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119674.992187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119674.992187] usb 1-1: USB disconnect, address 2
[119674.992187] usb 1-1: unregistering device
[119674.992187] usb 1-1: usb_disable_device nuking all URBs
[119674.992187] usb 1-1: unregistering interface 1-1:1.0
[119674.992187] usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
[119674.992187] usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
[119675.000000] usb 1-1:1.0: uevent
[119675.000000] usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00
[119675.000000] usb 1-1: uevent
[119675.156250] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119675.281250] usb 1-1: new high speed USB device using musb_hdrc and address 3
[119675.414062] usb 1-1: default language 0x0409
[119675.414062] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119675.414062] usb 1-1: Product: USB Mass Storage Device
[119675.414062] usb 1-1: Manufacturer: TSST corp
[119675.414062] usb 1-1: SerialNumber: SET084MP00000002A01
[119675.414062] usb 1-1: device v0409 p0840 is not supported
[119675.414062] usb 1-1: uevent
[119675.414062] usb 1-1: usb_probe_device
[119675.414062] usb 1-1: configuration #1 chosen from 1 choice
[119675.414062] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119675.414062] usb 1-1:1.0: uevent
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface - got id
[119675.421875] scsi1 : SCSI emulation for USB Mass Storage devices
[119675.429687] drivers/usb/core/inode.c: creating file '003'
[119675.429687] hub 1-0:1.0: 198mA power budget left
[119675.429687] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119675.429687] hub 1-0:1.0: port 1 enable change, status 00000503
[119675.437500] usb-storage: device found at 3
[119675.437500] usb-storage: waiting for device to settle before scanning
[119680.453125] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119681.203125] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119681.203125] sr 1:0:0:0: Attached scsi CD-ROM sr0
[119681.203125] sr 1:0:0:0: Attached scsi generic sg0 type 5
[119681.226562] usb-storage: device scan complete
[119690.851562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119693.734375] cdrom: sr0: mrw address space DMA selected
[119694.218750] cdrom: sr0: mrw address space DMA selected
[119694.453125] cdrom: sr0: mrw address space DMA selected
[119698.828125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119744.718750] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119751.500000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119760.132812] EAC mode: play enabled, rec enabled
[119762.835937] EAC mode: play disabled, rec disabled
[119775.171875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119780.187500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119794.859375] EAC mode: play enabled, rec enabled
[119797.750000] EAC mode: play disabled, rec disabled
[119976.031250] EAC mode: play enabled, rec enabled
[119978.734375] EAC mode: play disabled, rec disabled
[119988.796875] EAC mode: play enabled, rec enabled
[119991.742187] EAC mode: play disabled, rec disabled
[119994.882812] EAC mode: play enabled, rec enabled
[119997.773437] EAC mode: play disabled, rec disabled
[120003.265625] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[120003.414062] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[120003.890625] hub 1-0:1.0: logical disconnect on port 1
[120003.890625] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[120003.890625] hub 1-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
[120003.890625] usb 1-1: USB disconnect, address 3
[120003.890625] usb 1-1: unregistering device


All times are GMT. The time now is 21:46.
Page 5 of 7 « First 34 5 67
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8