Re: PR 1.3. Leaked?
 

Incorrect. Some warnings were bs, some were totally valid.

Re: PR 1.3. Leaked?
 

Move along people. Nothing to see here.
Got to play with the leaked FW (Not on my device, I hacked so much around I forgot what I did :D), and there's nothing worth rushing for :)

Re: PR 1.3. Leaked?
 

What is this file RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin

Is this the full pr1.2 ?

Re: PR 1.3. Leaked?
 

I'm with you except for this. NOLO is software that should be approached with extreme caution. An N900 recoverable only via JTAG is effectively bricked for most people.

Re: PR 1.3. Leaked?
 

Does this image change the loader? Has anyone confirmed if the alternate bootload stuff is in the W36 image?

One thing that does confuse me though: If you use the "hold u while booting" technique, doesn't that allow you to reflash the loader as well? I though the whole point of having the hardware shortcut was to force the load from ROM, which (while a set/old version) can always flash the entire device, loader included.

This was one of the nice bits built into the second gen of the Neo FreeRunner (vs the 1973). If you held a hardware key down at startup it would boot completely from ROM, allowing you to always recover from a bad software load, since there was no way to over-write the ROM code. The ROM version had speed issues (only negotiated USB 1), but it was a safe fallback if one needed it because they hosed the loader in NAND.

Re: PR 1.3. Leaked?
 

I'm not trying to be picky since I'm not really experienced in this low level flashing stuff, but I thought the N900 didn't have a JTAG port (or it had some sort of serial port that no one knows what it is)?

Eitherway, your point is valid ;)

And @ other posts on this forum, stop spreading ********, the image does not contain the latest git sources, my modest and hildon-desktop are both newer than the one in the image, bme is identical to the one in PR1.2, newer images != newer everything.

Since this image has gone public (sorta) on tmo, I hope you'll do something useful with it instead of ***** about how it doesn't contain features; for instance, find bugs, search the bugtracker, see if they were fixed or if more bugs were introduced; take for example Qt 4.7, QTextBrowser shows black text on a black background, which is a critical bug imo (same code works fine 4.6.2 on PR1.2 btw)

P.S., I'm not sure if the SGX driver was even changed (cba to check), the kernel is dated August 06 btw.

Edit: @ post above, the whole dualboot thing was overhyped too much on tmo, it's only a patch to the kernel, which I think, was introduced after August 6, so it probably isn't in this image.

Re: PR 1.3. Leaked?
 

I expect you're right. I've never gone looking for a JTAG port on the N900, and I just assumed there was one there, somewhere, as the N8x0 devices had them. For me it makes no difference, really, as I'm not 1337 enough for that level of hacking.

The message remains: Do not taunt Happy Fun Boot Loader.

Re: PR 1.3. Leaked?
 

MohammadAG how dare you inject so much common sense into this thread. :p

Re: PR 1.3. Leaked?
 

All Maemo devices (and I believe all Nokia phones) have a serial connection for fast Phoenix flashing. Not sure if they are JTAG or not. I would assume one of the interfaces under the N900's battery is it.

Re: PR 1.3. Leaked?
 

Any ideas what this one is, its from here http://tablets-dev.nokia.com/nokia_N900.php
and is 249MB

Is it the full PR1.2 ? (and I dont mean 1.3 btw)

If I want to fully flash my N900 back to factory is that the latest file I need ?