maemo.org - Talk
Page 5 of 46 « First 34 5 6715 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)
-   -   [Announce] kernel-power stable v51 in Extras-Devel (https://talk.maemo.org/showthread.php?t=85665)

lordcris 2012-07-25 15:33
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
Quote:
Originally Posted by alexgiancarlo (Post 1242782)
I also I have the same problem, do you have installed the Cleven?
Yes, I did. I removed it and know it installs fine.
Thanks

acrux 2012-07-25 15:51
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
So, this is my first problem of non-bootable N900 :)

What I had:
CSSU Testing
Kernel Power 50

So decided to upgrade to Kernel Power 51
Enabled Extras devel repository and upgraded through HAM - no problems so far.
Installed USB Mode + dependencies - also no problems except that the usb stick filesystem (FAT32) I tested was not recognized...

Decided to install u-boot (to test Nemo) according to the manual at first post of corresponding thread:
Installed these 2 u-boot packages in xterm with dpkg -i
Enabled Extras-devel repo and installed kernel-power-bootimg with apt-get

Now the N900 does not boot up
With keyboard closed it just says "Starting kernel" and then soon the device turns off
With keyboard open it shows the boot menu, but trying to choose there either the default kernel or kernel power51 the situation is the same - it just says "Starting kernel" and then soon the device turns off.
I can boot the Nemo from the sd card.

Any ideas what could go wrong?

Nobless 2012-07-25 15:58
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
Quote:
Originally Posted by acrux (Post 1242826)
So, this is my first problem of non-bootable N900 :)

What I had:
CSSU Testing
Kernel Power 50

So decided to upgrade to Kernel Power 51
Enabled Extras devel repository and upgraded through HAM - no problems so far.
Installed USB Mode + dependencies - also no problems except that the usb stick filesystem (FAT32) I tested was not recognized...

Decided to install u-boot (to test Nemo) according to the manual at first post of corresponding thread:
Installed these 2 u-boot packages in xterm with dpkg -i
Enabled Extras-devel repo and installed kernel-power-bootimg with apt-get

Now the N900 does not boot up
With keyboard closed it just says "Starting kernel" and then soon the device turns off
With keyboard open it shows the boot menu, but trying to choose there either the default kernel or kernel power51 the situation is the same - it just says "Starting kernel" and then soon the device turns off.
I can boot the Nemo from the sd card.

Any ideas what could go wrong?
Read U-boot thread here http://talk.maemo.org/showthread.php...u-boot&page=39 u have this problem not alone :)
Try install bit older version it should work http://talk.maemo.org/showpost.php?p...&postcount=391

acrux 2012-07-25 16:11
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
Quote:
Originally Posted by Nobless (Post 1242830)
Read U-boot thread here http://talk.maemo.org/showthread.php...u-boot&page=39 u have this problem not alone :)
Try install bit older version it should work http://talk.maemo.org/showpost.php?p...&postcount=391
Thanks! It seems, that it is time to learn how to flash the kernel???

projekt 2012-07-25 16:36
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
@Helmi
looks like we dont need the charger module.
Just leave the screen on while charging with bme.
I ran Jdownloader for 8h now.

Nobless 2012-07-25 16:37
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
Quote:
Originally Posted by acrux (Post 1242835)
Thanks! It seems, that it is time to learn how to flash the kernel???
Yes,
1. Install flasher-3.5 from here http://tablets-dev.nokia.com/maemo-d...-downloads.php
2. Copy attached kernel where u installed flasher-3.5
3. Connect phone with holding 'U'
4. Type in flasher-3.5 console :
Option A:
Code:
flasher-3.5.exe -k zImage-2.6.28.10-power51 --flash-only=kernel -f -R
It flash your kernel.

Option B:
Code:
flasher-3.5 -k zImage-2.6.28.10-power51 -l -b
Just loads, not flash kernel.

Choose which way u want, u can only load kernel without flashing then remove u-boot and install older version. Or just flash.

All info that i posted here can found in wiki http://wiki.maemo.org/Updating_the_t...rt_topic.21.29

Kernel:
http://www.failai.lt/ud162ttc8ux0/zI...10-power51.htm

c4rl05 2012-07-25 20:26
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
worked like a dream, nd m glad kp50 remained in the multiboot option

shady 2012-07-26 02:25
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
firstly im elated that theres still work being done!!! thanks a lot. however my n900 doesnt show open wifi networks ... or any wifi networks.

a bit too early .. loos like its workig now. thanks for the assist

em28 2012-07-26 18:38
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
After installing KP51 and USB mode I don't have access to Internal memory as well to SDCard.

Even as i removed USB mode it seems like there is no memory nor SD.

When I connect the device to a PC as mass storage, it recognize the device and the SD but ask to enter disc to it.

anyone ?

johnny27 2012-07-27 08:52
Re: [Announce] kernel-power stable v51 in Extras-Devel
 
Quote:
Originally Posted by sifo (Post 1242002)
at least you should say : "thank you very much for your efforts :) i really appreciate that ( if you do ) but i have a little problem..........."
no insult but this how it should be :)
I have no malice, I just made about the BUG.

I do not think I should have said "Thank you very much,"

Does the application have a BUG, not allow others to put forward?

I just tell the truth!

Add that I never use the kernel power

I am only responsible for testing only!


All times are GMT. The time now is 19:34.
Page 5 of 46 « First 34 5 6715 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8