maemo.org - Talk - Overclock the N900?

Page 506 of 536

« First

< Prev

506

Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)

- - Overclock the N900? (https://talk.maemo.org/showthread.php?t=39753)

DrWilken

2010-11-10 17:29

Re: Overclock the N900?

Quote:

Originally Posted by mooninite (Post 869418)

Is the camera fixed in the 44 build? I am not using fcam. The stock Nokia camera-ui program always crashed on the 42 build for me.

Works here... ;)

bald.eagle.one

2010-11-10 17:42

Re: Overclock the N900?

after updating to v44 got stuck at u-boot
did flash and installed only kernel and settings
same happened :(

mooninite

2010-11-10 17:47

Re: Overclock the N900?

Quote:

Originally Posted by DrWilken (Post 869422)

Works here... ;)

Well... I take my thanks back.

Opening the camera shutter, camera-ui starts, immediately says "Operation Failed" and exits. No go.

DrWilken

2010-11-10 17:50

Re: Overclock the N900?

Quote:

Originally Posted by mooninite (Post 869434)

Well... I take my thanks back.

Opening the camera shutter, camera-ui starts, immediately says "Operation Failed" and exits. No go.

Ouuch... :/ I had the same problem until installing v44, BUT I'm also using fcam.

moepda

2010-11-10 18:02

Re: Overclock the N900?

Quote:

Originally Posted by lemmyslender (Post 868698)

1) Download kernel-power_2.6.28-maemo42_armel.deb from the repository.
2) Extract the fiasco image (I used 7-zip in windows)
3) Extract the kernel from the fiasco image with the flasher (In windows, flasher-3.5.exe -F name_of_file.fiasco -u)
4) Renamed the resulting zImage file to vmlinuz-2.6.28.10power42
5) Copy this file to /boot/multiboot
6) Copied /etc/multiboot.d/01-Maemo-kernel-power40 to 02-Maemo-kernel-power42
7) Edited the new file to point to the new kernel
8) Reboot.

done this with power44 and worked :) many thanks , had reboot loop with multiboot , flashed kernel only to recover maemo. then followed info above (edited download link to 44 from 42) and followed the info. now running power44 with multiboot :) camera ok too but not using fcamera...

sponka

2010-11-10 18:04

Re: Overclock the N900?

Hm ... I sucessfully installed new kernel (v44), updated fcam-driver and everything works fine :)

However, I am missing "kernel-config", only thingie cmd return is "kernel-power-deinstall".

Am I missing something?

DrWilken

2010-11-10 18:12

Re: Overclock the N900?

Quote:

Originally Posted by sponka (Post 869457)

Is kernel-power-settings installed?

bunanson

2010-11-10 18:21

Re: Overclock the N900?

Quote:

Originally Posted by firstknight (Post 869289)

oh yeah.. i think the multiboot overides the U-boot.. so no more u-boot... unless you remove multiboot i suppose...

I got Nitdroid/multiboot installed. Upgraded to 42 this am, manually fixed the red box panic thing as well as fcam driver. Everything works. Then I upgraded to power44 via app manager. It booted,

1) tux boot 1st
2) rapidly sweeped to multiboot with 3 options, omap1, power44, nitdroid.

bun

kyllerbuzcut

2010-11-10 18:35

Re: Overclock the N900?

Quote:

Originally Posted by harvindhillon (Post 869276)

I updated to v44 and now it gets stuck at the uboot screen saying loading kernel. Anyone with similar issues?

Yep- I just got this too. Did everything like it said to do but ended up like this. Will leave it on while I got to the shops and see if it is just taking ages to load something.

You can either wait for it to start loading a kernel or press within 3 seconds to get a command prompt.

Anyone else know how to get to multiboot from that command prompt or is this a definite reflash scenario?

joerg_rw

2010-11-10 19:14

Re: Overclock the N900?

@titan:
http://talk.maemo.org/showpost.php?p...&postcount=199 (hostmode)
and many thanks for your support

jOERG

All times are GMT. The time now is 18:23.

Page 506 of 536

506