Re: Overclock the N900?
 

I have determined that - at least in my device - power kernel v.45 can't reliably initiate mass storage mode when connecting the N900 to an external host computer via usb.

When connecting the usb cable, dmesg outputs and when disconnecting outputs .

In order to reinstate the normal operation, I have either to pull out the battery for 30 minutes (5 are not enough) or reflash the stock kernel.

Hope this report reaches Titan for refining his fine work.

Re: Overclock the N900?
 

btw... i saw the new kernel power v46....

This custom kernel contains additional modules for IPv6, packet filtering, QoS, NAT, tunneling, kernel configuration, Wifi mesh networking, builtin ext3 for booting from other media, ext4, XFS, reiserfs, NTFS read support, ISO9660, UDF, CIFS, automounter, squashfs, unionfs, device mapper and dm-loop, cryptography, cryptoloop, EFI partitions, UTF8 codepages, mouse+joystick input, PPP, PPTP, radio RDS, serial support, USB/IP and generic USB device drivers, battery info, WLAN monitoring, overclocking, kexec and experimental USB hostmode support.

how do i get the USB hostmode working?

Re: Overclock the N900?
 

Install h-e-n.

Please use the search facility, it's there for a reason!

Re: Overclock the N900?
 

Well I have done nothing but I can use USB mass storage mode anytime anywhere without hassle. So far really no problem with v45 kernel.

Re: Overclock the N900?
 

Other than a somtimes having to try a few times in order to sucessfully boot up all the way (it never lasted long enough to start to worry me), i've not had any issues with v45, and i like having the console show during boot (would rather if it also showed during the Maemo boot itself in place of/under/overlaid on the KITT throbber and stuff, but that is whole'nother thread)

Re: Overclock the N900?
 

I haven't mass storage mode with ver 46 either. Mass storage - reliable - stops at ver. 40 for me.

Re: Overclock the N900?
 

Hmm pretty odd... Wonder how did the kernel affect USB mass storage? 0.o
BTW there is 1 issue on uboot kernel power... but not that critical.
If I reboot the device(typing reboot from xterm, reboot from apps, reboot from systemui) then the phone never successfully boot itself. It's just stuck on uboot till it shuts off. But a simple power off and on did the trick.
And I noticed whenever I do a reboot UBoot doesn't detect my mmc. but on a power of mode it detects it. Wonder if doing a power off and on should fix your problem?

Re: Overclock the N900?
 

ok... very good... that confirmed it.. but how do i install h-e-n???

when i install h-e-n it is unable to instal i2c-tools and such h-e-n has unmet dependency... cos it kinda unable to replace i2c-dev.h which is part of kernel-power-header....

please help...

Re: Overclock the N900?
 

no audio and camera after v46....

rebooting....

EDIT: nope......i hear nothing....:)

Re: Overclock the N900?
 

Did you see this thread?

http://talk.maemo.org/showthread.php?t=65497

Might your audio problem be related?