Re: QtIrreco for N900
 

download the remote here:
http://lirc.sourceforge.net/remotes/

There's what to do with it:
http://irreco.garage.maemo.org/FAQ.html#FAQ

FAQ
IR led is working but QtIrreco doesn't send any signal?

First thing to check is if lirc is running by typing ps in terminal.You should see this line:

/usr/sbin/lircd --device=/dev/lirc0 --listen=8765

Then check the file under /home/user/MyDocs/qtirreco/Remotes/<remotename.conf> for whats the device in line:

command: <device> <command<

Then check if that device actually is the same under /home/user/MyDocs/qtirreco/Devices/<device>. There check the line after begin remote:

name <device>

Then under /etc/lircd.conf you should have proper device path included.

If those devices in lines match and lirc runs the IR signal should be sent. Some codes doesn't work but still the signal is emitted.

Re: QtIrreco for N900
 

nobody take the project qtirreco and irreco?

Re: QtIrreco for N900
 

Doesn't seem like it. I tried to contact Niko too but his email address is no longer valid either.

Re: QtIrreco for N900
 

Hi
could someone give me a working link witch I can youse as baseURL
the default gives me a "network error 4"

Re: QtIrreco for N900
 

try baseURL
http://lirc.sourceforge.net/remotes/

I don't know if it will work, but all the remotes are there.

Re: QtIrreco for N900
 

With this link the qtirreco doesn't works, you must take manually.
I can't take a new remote for my new TV, :(
Somebody know how to repair the request failed.

Re: QtIrreco for N900
 

how to get this remote http://lirc.sourceforge.net/remotes/ei/TV90
in irreco - what to do with this?
and i have irrco 0.8.11 installed
please help

Re: QtIrreco for N900
 

#I ran as root, but not needed.
cd /home/user/MyDocs/qtirreco/Devices

#dowload remote file here, eg:
wget http://lirc.sourceforge.net/remotes/ei/TV90 .

exit console,

Or you can download your remote on windows and copy and past it into N900:\qtirreco\Devices

start QtIrreco
create new remote
Edit remote
new button
click add on the right
from the left, select your new remote, eg TV90 and from the right, select your command, eg mute
ok
Move button, etc, repeat, new button etc.
click save remote.
the rest is as normal.

Thank me for holding your hand!! :D

Re: QtIrreco for N900
 

Are you sure it must be as root? It is after all in the homedirectory...

Re: QtIrreco for N900
 

yes, fixed... mine is root... i do stupid stuff :D