maemo.org - Talk
Page 6 of 23 « First 45 6 7816 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)
-   -   u-boot for the RX-51 (N900) (https://talk.maemo.org/showthread.php?t=62146)

funkmunk 2011-01-10 19:20
Re: u-boot for the RX-51 (N900)
 
Quote:
Originally Posted by pavi.kant (Post 917108)
I BRICKED MY Device...i installed u boot and now wen i try to boot up i get the penguin screen it tries to load the kernel...
says booting NOLO supplied kernel...
comes to starting kernel... then just shuts off
Please help!!!
Were u not informed that its a risky install? Why did you install if you don't know what the software is going to do.

Read the Wiki for flashing the firmware.

sidd211095 2011-02-07 17:59
Re: u-boot for the RX-51 (N900)
 
I BRICKED MY Device...i installed u boot and now wen i try to boot up i get the penguin screen it tries to load the kernel... and then shut downs .......................plz help fast !!!!!

tzalizam 2011-03-31 00:02
Re: u-boot for the RX-51 (N900)
 
Quote:
Originally Posted by sidd211095 (Post 938296)
I BRICKED MY Device...i installed u boot and now wen i try to boot up i get the penguin screen it tries to load the kernel... and then shut downs .......................plz help fast !!!!!
Mine as welll..... I just did!!!!....Anyone pls help......:(

Mentalist Traceur 2011-03-31 00:12
Re: u-boot for the RX-51 (N900)
 
Reflash the kernel with a normal kernel image (either stock or power) without uboot.

maxximuscool 2011-03-31 00:52
Re: u-boot for the RX-51 (N900)
 
Quote:
Originally Posted by tzalizam (Post 978851)
Mine as welll..... I just did!!!!....Anyone pls help......:(
Looks like you did not type in "run noloboot" fast enough. You get about 10seconds before the device shutdown.

If you don't know what you're doing then this is what you'd get from installing things that had a big "WARNING" written beside it.

tzalizam 2011-03-31 03:31
Re: u-boot for the RX-51 (N900)
 
Quote:
Originally Posted by maxximuscool (Post 978869)
Looks like you did not type in "run noloboot" fast enough. You get about 10seconds before the device shutdown.

If you don't know what you're doing then this is what you'd get from installing things that had a big "WARNING" written beside it.
Yeap 10 secs so quick but, I did try to type run noloboot, Starting kernel.... then..nothing happens.......

I managed to run MeeGo only.... I cannot boot back to the old system. What should I do to get back the old maemo 5? I did remove the SD and run noloboot....and again... Starting kernel...... nothing happens....

Thanks a lot for helping me....btw any chances to speed up Meego? Mine is very very slow....Is it because of using SD card?

Fabry 2011-08-24 18:31
Re: u-boot for the RX-51 (N900)
 
I have rebuild u-boot (Matan's version) from source.

Compiling process (native SDK on N900) has gone well, no errors only some warnings.

Unfortunately the u-boot's image obtained doesn't works on N900.

If I flash it (with attached power kernel) I obtain a corrupted screen during boot and some seconds after N900 power off (no Maemo's boot)

Why?
Where is the error during image build process ?

pali 2011-09-16 17:47
Re: u-boot for the RX-51 (N900)
 
Hello, I builded new U-Boot based on master U-Boot git tree from 26.08.2011 with new ali's patches. I implemented on screen BootMenu to U-Boot (it looks like Fanoush BootMenu script) which is included too.

Radicalz38 2011-09-16 22:47
Re: u-boot for the RX-51 (N900)
 
Hi pali! I saw while searching the net some time ago that you posted a patch for uboot to allow it to boot through EMMC + support for bootmenu. Is that patch included on your u-boot? Or is this just a bootmenu + uboot. Would love the EMMC part :)

Radicalz38 2011-09-16 22:52
Re: u-boot for the RX-51 (N900)
 
Nevermind saw it already here

https://gitorious.org/u-boot-shr/u-b...s/nokia_rx51.h

great thanks pali! :)


All times are GMT. The time now is 16:07.
Page 6 of 23 « First 45 6 7816 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8