maemo.org - Talk
Page 6 of 159 « First 45 6 7816 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   [HOWTO] Comprehensive Firmware Flashing Guide for N9 (https://talk.maemo.org/showthread.php?t=82693)

martycollinsesq 2012-03-06 02:39
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by martycollinsesq (Post 1172678)
Bravo! Update to 1.2 from NSU went fine.
Another Bravo for the guide. Gotta back that arse up now cause I had quicktweak on my N9 when I did the update to 1.2:confused:; now I need to flash to factory state:eek:. Into the deep I go, relatively unafraid, thanks to community support;).

_Routser 2012-03-07 02:43
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
I Hope someone can help here.

Today my phone went sluggish and I rebooted it, but it got stuck into a reboot loop, tried to revive it with Nokia link with no results.

Now I managed to flash it with my Mac following the instructions in this thread, flashing went fine but the phone is still in the loop, it goes barely to the point where i should enter pin before rebooting...

Any suggestions? Or is it to Nokia Care with me :(

itsnotabigtruck 2012-03-07 02:46
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by _Routser (Post 1175627)
I Hope someone can help here.

Today my phone went sluggish and I rebooted it, but it got stuck into a reboot loop, tried to revive it with Nokia link with no results.

Now I managed to flash it with my Mac following the instructions in this thread, flashing went fine but the phone is still in the loop, it goes barely to the point where i should enter pin before rebooting...

Any suggestions? Or is it to Nokia Care with me :(
What if you try zeroizing it? (remember, this = all data destroyed)

_Routser 2012-03-07 03:11
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by itsnotabigtruck (Post 1175628)
What if you try zeroizing it? (remember, this = all data destroyed)
Trying it now, as I am on Mac, did I understand correctly that I can't get the emmc? But the first command line should probably do the trick (if anything does), so i just leave this out?

Code:
flasher -f -F main.bin -F emmc.bin --flash-only=mmc
EDIT: Zeroizing worked! Thank you for this extrmely helpful thread

Now to the tedious process of getting it back the way it was..

lavo 2012-03-07 03:48
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Does anyone have an alternative site for the Mac flasher program? Its seems to be borked from the official download site on the first page.

ronmakaay 2012-03-07 07:51
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Hi there,
this is so far the best guide i have found, but I need some little help before I flash my phone
insdie the log files of the firmware my phone version that I get from NaviFirm+:
059L698: N9 RM-696 Country Variant Australia AU Black 16GB V1
Log Files:
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic0.bin
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic1.bin
But I found this 2 .bin files, and I don't know if this will lock the SIM of my phone and then I will be in troubles well I guess.
So if any can tell me something about it, this .bin files can be exclude from the flash installation or they must also be also included in the installation??
Can any buddy help me, I’m so noob
:p

itsnotabigtruck 2012-03-07 18:13
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by ronmakaay (Post 1175705)
Hi there,
this is so far the best guide i have found, but I need some little help before I flash my phone
insdie the log files of the firmware my phone version that I get from NaviFirm+:
059L698: N9 RM-696 Country Variant Australia AU Black 16GB V1
Log Files:
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic0.bin
simlock_maemo__deB_allowed2_3gstandard_bb5_multi_a sic1.bin
But I found this 2 .bin files, and I don't know if this will lock the SIM of my phone and then I will be in troubles well I guess.
So if any can tell me something about it, this .bin files can be exclude from the flash installation or they must also be also included in the installation??
Can any buddy help me, I’m so noob
:p
They won't lock your phone, but they also aren't needed for flashing. flasher only cares about the two huge .bin files starting with DFL61.

charlysoft 2012-03-07 23:32
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by nicodonte (Post 1173781)
No problem to flash with a Claro branded N9 from Argentina, no blocked at all, firmware update without any problem.
Sorry my english.

would have trouble doing it to LTA or Global version ?

tnks

tiiagoFernandez 2012-03-08 00:49
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Hey.. I have a
N9 RM-696 Country Variant Sweden SE Black 16Gweden SE Black 16GB
Can i flash it to
RM-696 NDT CENTRAL EUROPE BLACK 16G
?

Im running PR 1.2
The legacys are 339 to 001 respectivly...
Thanks for the help

itsnotabigtruck 2012-03-08 04:31
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by charlysoft (Post 1176217)
Sorry my english.

would have trouble doing it to LTA or Global version ?

tnks
The LTA version actually is the global version, so go ahead.

Quote:
Originally Posted by tiiagoFernandez (Post 1176247)
Hey.. I have a
N9 RM-696 Country Variant Sweden SE Black 16Gweden SE Black 16GB
Can i flash it to
RM-696 NDT CENTRAL EUROPE BLACK 16G
?

Im running PR 1.2
The legacys are 339 to 001 respectivly...
Thanks for the help
The firmware for that variant was actually released this week, but if you want to flash it to 001, that should work too. :)


All times are GMT. The time now is 09:12.
Page 6 of 159 « First 45 6 7816 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8