maemo.org - Talk
Page 6 of 11 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI (https://talk.maemo.org/showthread.php?t=82932)

stevomanu 2012-03-14 14:09
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
Try installing the deb file from here see if that helps ....

http://repository.maemo.org/extras-d...emo0_armel.deb

shockingfm 2012-03-14 16:22
Re: [Announce] Wifi Jamming Script - THE PURGE - to joke with friends
 
Quote:
Originally Posted by Red_Fox (Post 1179051)
have a look at new version!

in the next update I will insert the beacon flood attack
Hi,

Whats your donation address?

Also, i have the new 0.3 version but i cant find any of the MDK3 lines to execute?

Also, you may have to adjust it so that SSID's with spaces in them dont get read as two different SSID's.

How do i install MDK3 also...?

Thanks again for your great app

Nick

D@vIcHoJD 2012-03-14 17:58
Re: [Announce] Wifi Jamming Script - THE PURGE - to joke with friends
 
Quote:
Originally Posted by D@vIcHoJD (Post 1179171)
I used
Code:

/home/opt/cleven-experimental/compat-wireless/

But apparently I have the same error. When active monitor mode I can use the script, please could modify the script so you can use, so far I've been using version 0.1 without problems.

Please help me with version 0.3:D
Please any help me with version 0.3

Red_Fox 2012-03-14 21:55
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
the mdk3 is used (in v0.3) for purge all client with the option "d"
Code:
d  - Deauthentication / Disassociation Amok Mode
    Kicks everybody found from AP
look here

I've used this script
Code:
mdk3 wlan0 d -n (ssid) -c (channel)
for load/unload I copied and pasted the contents of the FAS load/unload script..
Code:
#load
cd MyDocs/wl1251-maemo/binary/compat-wireless/
sh load.sh
sleep 1s
sh load.sh
echo "driver loaded"
sleep 1s
if you have problem whit v0.3 to load/unload driver please post the error

D@vIcHoJD 2012-03-14 22:49
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
Is this a mistake, report it before:D

ioctl(SIOCSIWMODE) failed: Device or resource busy

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make
sure RFMON is enabled: run 'airmon-ng start wlan0 <#>'
Sysfs injection support was not found either.

Red_Fox 2012-03-14 23:19
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
Quote:
Originally Posted by D@vIcHoJD (Post 1179582)
Is this a mistake, report it before:D

ioctl(SIOCSIWMODE) failed: Device or resource busy

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make
sure RFMON is enabled: run 'airmon-ng start wlan0 <#>'
Sysfs injection support was not found either.
maybe you have a problem with the power kernel (look here)
what version you have?

fAircrack work?

anyway I found this article.."How to fix ‘ioctl(SIOCSIWMODE) failed: Device or resource busy ‘ problem." The problem is solved with enabling monitor mode (as you said)..
...but it is strange, because it should work without a monitor mode...

shockingfm 2012-03-14 23:26
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
Quote:
Originally Posted by Red_Fox (Post 1179565)
the mdk3 is used (in v0.3) for purge all client with the option "d"
Code:
d  - Deauthentication / Disassociation Amok Mode
    Kicks everybody found from AP
look here

I've used this script
Code:
mdk3 wlan0 d -n (ssid) -c (channel)
for load/unload I copied and pasted the contents of the FAS load/unload script..
Code:
#load
cd MyDocs/wl1251-maemo/binary/compat-wireless/
sh load.sh
sleep 1s
sh load.sh
echo "driver loaded"
sleep 1s
if you have problem whit v0.3 to load/unload driver please post the error
Hi Red,

so just to confirm:

Option 3 (choose the victims clients/purge all users) executes the MDK3 script above right?

Thanks

Nick

Mohammed Muid 2012-03-15 01:46
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
okay. y do we need cleven or faircrack. we can just start the script from x terminal. i am way too lost now. :s

D@vIcHoJD 2012-03-15 06:19
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
Quote:
Originally Posted by Red_Fox (Post 1179591)
maybe you have a problem with the power kernel (look here)
what version you have?

fAircrack work?

anyway I found this article.."How to fix ‘ioctl(SIOCSIWMODE) failed: Device or resource busy ‘ problem." The problem is solved with enabling monitor mode (as you said)..
...but it is strange, because it should work without a monitor mode...
Thanks for the help,:D if I run this command:

sudo ifconfig wlan0 down
sudo iwconfig wlan0 mode Monitor
sudo ifconfig wlan0 up

is executed with permissions and enable monitor mode, I use faircrack, Cleven and Cleven experimental, the problem is that to run the script I have to put these commands, you can do something to avoid having to run these commands each time you use the script, this problem also shows in faicrack. Could you help me please:D

Mohammed Muid 2012-03-15 13:47
Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 
in my case it doesnot purge all clients. i loaded the drivers. searched for ap. it collected data for more than 20000 . i selected the ap. then selected all clients to purge.an xterm window appear like sending deauthenticate data 64bytes or smthng. bt i can connect from my pc. i loaded with xterm.
sh purge_0.3.sh. am i doing it ryt? help needed


All times are GMT. The time now is 22:01.
Page 6 of 11 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8