maemo.org - Talk - Help: Reboot nokia n9

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)

- - Help: Reboot nokia n9 (https://talk.maemo.org/showthread.php?t=90759)

Re: Help: Reboot nokia n9

Got the result below after typing in the first code...

What's next...

Re: Help: Reboot nokia n9

And then got this error after typing in flasher -f -F main.bin
Yes..i changed the file name to main.bin.

Re: Help: Reboot nokia n9

Found this earlier http://allnokia.ru/soft/download.php?id=106 Made by Coderus
Its in russian but you can use it:

After done whats said in image then go to: C:program files/nokia/flasher/

and do: flasher -R

Is your main.bin in the same folder as flasher.exe?

type "dir" to get a list of files and folders for the current directory...

Re: Help: Reboot nokia n9

@mikosssss, in the cmd I type flasher -R? When I try flasher -i it actually responds with waiting...USB not found (should I plug my phone here?)

@mcbook type dir into where? I copied the main.bin to the flasher folder located at C:\Program Files\Nokia\Flasher

Into CMD... (the command prompt)

from your screenshot i can see that you have executed flasher but it couldn't find the firmware image which means that you spelled it wrong or it isn't in the right folder...

To clarify flasher commands:

flasher -R makes your N9 reboot
flasher -i gives you information about your phone when you connect your N9

I STRONGLY suggest that you read the firmware flashing guide!
It has all the information you need...

Re: Help: Reboot nokia n9

This is where I put the main.bin file in under
C:\Program Files\Nokia\Flasher

Is it correct?

Yes this is the right place

now just open a cmd with admin permissions, navigate to the flasher folder and execute flasher with the proper flags and path to main.bin -> connect your N9 when it says waiting and flash your

Re: Help: Reboot nokia n9

Quote:

Originally Posted by mcbook (Post 1361764)

^^

so, you installed winflasher right?
Now you need to copy the firmware.bin file to where the flasher.exe is

thats usually under C:\Program Files\Nokia\Flasher

now you need a CMD promt with admin permissions!

press start and type cmd in the search bar -> right click on cmd.exe and run as administrator

then navigate to the flasher folder (where the flasher.exe and your firmware image are)

to do that type in cmd

EDIT

Code:

cd "C:\Program Files\Nokia\Flasher"

to make things simpler rename the firmware image to main.bin

now you are ready to flash your device

shut down your N9 (if it's not already off) and

type this to flash the firmware

Code:

flasher -f -F main.bin

NOW you need to connect your n9 via USB and it should start flashing the firmware
you can monitor progress in cmd window

if it writes something like "success" or "flashing successful"
or something

type

Code:

flasher -R

and disconnect usb

there it is! good luck

Should I use the above codes to try to flash?
Tried it again, but the same error appeared.