maemo.org - Talk
Page 6 of 6 « First 45 6
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   MeeGo / Harmattan (https://talk.maemo.org/forumdisplay.php?f=45)
-   -   Nokia n9 stuck on warning! you have modified the device software... (https://talk.maemo.org/showthread.php?t=93407)

robert01 2014-07-07 06:07
Re: Nokia n9 stuck on warning! you have modified the device software...
 
it doesn't work.. i give up

irulestar 2014-07-09 05:25
My another N9 have this message too ...
:D
My friend on forum says its IC RAM or IC FLASH is Damaged :D
Keep Calm....
I'm Waiting for This PROBLEM SOLVING :D

juiceme 2014-07-09 06:29
Re: Nokia n9 stuck on warning! you have modified the device software...
 
Quote:
Originally Posted by irulestar (Post 1432197)
My friend on forum says its IC RAM or IC FLASH is Damaged :D
Keep Calm....
I'm Waiting for This PROBLEM SOLVING :D
Yes, it is possible.
However, if the HW is damaged, how do you propose to "solve the problem"? :eek:

robert01 2014-07-11 15:24
Re: Nokia n9 stuck on warning! you have modified the device software...
 
when I create partition with parted at the end when I write quit it gives me this message
Quote:
Information: You may need to update /etc/fstab.

rainisto 2014-07-11 19:38
Re: Nokia n9 stuck on warning! you have modified the device software...
 
Quote:
Originally Posted by robert01 (Post 1431777)
When I try to write start 1024 it writes 1024mb not 1024s and for end I write 18464767 and it recognizes it like 18464767mb not 18464767s

I have like this:
(parted) print
print
Model: MMC HYNIX (sd/mmc)
Disk /dev/mmcblk0: 14,80GB instead of 31047680s
Sector size (logical/physical): 512B/512B
Partition Table: msdos

how do I change to sectors not gb?
Looking from this log, it most likely is the bad memory chip model by looking the name that was automaticly switched to new device in Nokia care without any question asked. But nowadays care might not care anymore. So you might out of luck unless your 2 year factory warranty still is in effect.


All times are GMT. The time now is 15:36.
Page 6 of 6 « First 45 6
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8