maemo.org - Talk - SailfishOS 2.0 Nexus 5 CM12.1 Alpha1

maemo.org - Talk (https://talk.maemo.org/index.php)

- SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)

- - SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview (https://talk.maemo.org/showthread.php?t=96932)

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by mautz (Post 1526620)

Minimecs bt script isn't working on cm13 port at the moment, because hcitool doesn't show any connections when it is connected to a bt speaker, so it quits the connection after 120 seconds. Minimec could you check this on cm13?

Hi Mautz. I passed some tests with the cm13 build. Works as expected here. I used version: 0.3 of my script (link in the post above.). Could it be that we got a bug when removing the 'log function' in the version you have on git? Maybe somehow your speaker lost connection with the phone?

I will do another test tomorrow in my car.

Code:

,---

| SailfishOS 2.0.5.6 (Haapajoki) (armv7hl)

'---

[nemo@Sailfish ~]$ getprop ro.build.version.release

6.0.1

[nemo@Sailfish ~]$ devel-su

Password: 

[root@Sailfish nemo]# ./bt-sleep-monitor.sh &

[1] 11276

[root@Sailfish nemo]# exit

[nemo@Sailfish ~]$ tail -f /dev/shm/bt-sleep-monitor.log 

Sun Apr  9 22:21:31 CEST 2017: Log started

Sun Apr  9 22:21:31 CEST 2017: Set 'lpm=1' as default

Sun Apr  9 22:21:31 CEST 2017: Bluetooth disabled (starting bluetooth listener)

Sun Apr  9 22:22:11 CEST 2017: Action 'bluetooth on' (set 'lpm=0' for 120 seconds)

Sun Apr  9 22:24:11 CEST 2017: Device connected (listening for 'disconnect')

Sun Apr  9 22:24:24 CEST 2017: Device disconnected (set 'lpm=1')

Sun Apr  9 22:24:24 CEST 2017: Bluetooth enabled (starting 'display on' listener)

Sun Apr  9 22:24:42 CEST 2017: Action 'display on' (set 'lpm=0' for 120 seconds)

Sun Apr  9 22:26:42 CEST 2017: Device connected (listening for 'disconnect')

Sun Apr  9 22:27:01 CEST 2017: Device disconnected (set 'lpm=1')

Sun Apr  9 22:27:02 CEST 2017: Bluetooth disabled (starting bluetooth listener)

Sun Apr  9 22:27:41 CEST 2017: Action 'bluetooth on' (set 'lpm=0' for 120 seconds)

Sun Apr  9 22:29:41 CEST 2017: No connection after 120 seconds (set 'lpm=1')

Sun Apr  9 22:29:41 CEST 2017: Bluetooth enabled (starting 'display on' listener)

Sun Apr  9 22:30:22 CEST 2017: Action 'display on' (set 'lpm=0' for 120 seconds)

Sun Apr  9 22:32:22 CEST 2017: No connection after 120 seconds (set 'lpm=1')

Sun Apr  9 22:32:22 CEST 2017: Bluetooth disabled (starting bluetooth listener)

Sun Apr  9 22:32:36 CEST 2017: Action 'bluetooth on' (set 'lpm=0' for 120 seconds)

Sun Apr  9 22:34:36 CEST 2017: Device connected (listening for 'disconnect')

Sun Apr  9 22:35:34 CEST 2017: Device disconnected (set 'lpm=1')

Sun Apr  9 22:35:34 CEST 2017: Bluetooth enabled (starting 'display on' listener)

Sun Apr  9 22:35:46 CEST 2017: Action 'display on' (set 'lpm=0' for 120 seconds)

Sun Apr  9 22:37:46 CEST 2017: Device connected (listening for 'disconnect')

Sun Apr  9 22:38:09 CEST 2017: Device disconnected (set 'lpm=1')

Sun Apr  9 22:38:09 CEST 2017: Bluetooth enabled (starting 'display on' listener)

Sun Apr  9 22:38:14 CEST 2017: Action 'display on' (set 'lpm=0' for 120 seconds)

^C

[nemo@Sailfish ~]$

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by mautz (Post 1526659)

My custom kernel has double tap to wake feature, but since this is not an original feature of the Nexus5 it will cause a massive battery drain.

Better use the fake dt2w with LPM mode.

Thanks for the info. I got my wish. A few links to make it easier for newbies like me:

patchmanager
Patch: Sneak Peek option
Patch: add Sneak Peek option to Display settings This works for me
Glance Screen tag at together.jolla.com

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

@minimec

I'll test with 0.3 version of your script in the next days, i have no bt hardware here since i am not at home at the moment, i'll report back. Have you tested the connection for more than 120 seconds and do you get any output when you are connected with hcitool?

Thanks!

@maidis

Code:

ssu ar mer-tools

pkcon refresh

pkcon install mce-tools

mcetool --set-low-power-mode=disabled

mcetool --set-lpmui-triggering=from-pocket,hover-over

mcetool --set-low-power-mode=enabled

in terminal will do the same.

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by minimec (Post 1526698)

If you don't start the 'bt-sleep-monitor.sh' script in some startup script or systemd service, you have to start it manually. (I pretend that the script is in the /home/nemo folder)

Code:

chmod +x bt-sleep-monitor.sh   # Needed only once

devel-su

./bt-sleep-monitor.sh &

exit

Thank you minimec.
It works! I had tried to execute the script file with the command:
sh filename.sh
but it wasn't the correct way.

How to run the script at startup now? I'm trying to understand how systemd works but I'm not sure yet.

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

@mautz

Yes I tested more than 120 seconds, sometimes even listening to some music.

In the script I check for an existing connection with this 'if' statement

Code:

if  [ "$(hcitool con | grep \>)" == "" ] ; then

...

I I do the 'hcitool' command in the terminal with an existing connection, I get ...

Code:

[root@Sailfish nemo]# hcitool con | grep \>

        > ACL 00:0D:44:AD:FF:E1 handle 11 state 1 lm MASTER AUTH ENCRYPT

And... You need to be 'root' to get some info with 'hcitool' ;)

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by claustn (Post 1526710)

How to run the script at startup now? I'm trying to understand how systemd works but I'm not sure yet.

I created a systemd service that I use for all my 'tuning' during boot. The initial post can be found here...

With this you should be able to create your own service. The actual script would then look something like this...

Code:

#!/bin/bash



## bt-sleep-monitor service script



start() {

    /home/nemo/bt-sleep-monitor.sh &

}



stop() {

    killall bt-sleep-monitor.sh dbus-monitor

}



case "$1" in

    start)

        start

        ;;

    stop)

        stop

        ;;

    restart)

        stop

        sleep 1

        start

        ;;

    *) exit 1

esac

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by minimec (Post 1526711)

@mautz

And... You need to be 'root' to get some info with 'hcitool' ;)

Ah, not sure if i tried it with root :-D

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Yes I'm aware of Anbox, yes I'm looking into it, I'll be getting the sources and playing with it as soon as I get my dev machine sorted.

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

There is an other OSes PR that mentions SFOS:
https://github.com/anbox/anbox/pull/29

Though I couldn't find an Android image for ARM.

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

I've followed the entire thread. The amount of information is overwhelming.

Could we arrange to update the wiki?

Maybe someone can post links to the exact posts that handle certain parts of the install, and we compile them together.

What comes to my mind right now:

what to download & where
how to install (in multirom; how to skip tutorial)
how to apply all the fixes
all required workarounds (like 4-finger touch)
how to configure undervolting (including lowest voltages known to work)
screen wake up (lpm)
aliendalvik
anything else I might have overlooked