maemo.org - Talk
Page 62 of 77 « First 526061 62 636472 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)
-   -   Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45! (https://talk.maemo.org/showthread.php?t=61338)

atilla 2010-11-08 14:21
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
you guys know that you have to disable the pin code on your sim card in maemo to get the damn flight mode off???
and to bun:
no its ok i got the full 8gb now(7,6)thanks to the format but i will buy a new pc soon with integrated card reader.
anyway,thanks for your help.

lemmyslender 2010-11-08 14:37
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
@ ziggadebo

Check out the nitdroid forums. There is a lot of info on apps etc., and a couple of ways to fix the market. Probably depends on the user as to what they're missing from maemo. I know I've used some golf apps, better free nav (with a bluetooth gps currently), other stuff.

@atilla good point, I'd forgotten about that (not my problem, don't use a pin code at all).

tubeat 2010-11-09 00:09
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
The red light issue is solved when im use original charger, usually i use desktop charger :D

bunanson 2010-11-09 00:55
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
Quote:
Originally Posted by greatmanlxw (Post 866718)
really? a-dollar card reader as a christmas gift? and they let you get away wid it? we should swap families man
This is a giant upgrade. In the past, we just held hands and sang Christmas carol.

You believe it :)

bun

turbowei 2010-11-09 00:57
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
I am running into this problem.

I partitioned and installed all the multiboot stuff. No problem.

But then when I ran nitdroid, I got this:


Good! Here we go.

Unmounting /dev/mmcblk1p1 ...done
Uninstalling any incompatible software ...FAILURE. Bailing out.
/home/user #

I am using PR 1.3 with kernel-power.

Any helps???

Thanks

turbowei 2010-11-09 01:22
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
Quote:
Originally Posted by turbowei (Post 867592)
I am running into this problem.

I partitioned and installed all the multiboot stuff. No problem.

But then when I ran nitdroid, I got this:


Good! Here we go.

Unmounting /dev/mmcblk1p1 ...done
Uninstalling any incompatible software ...FAILURE. Bailing out.
/home/user #

I am using PR 1.3 with kernel-power.

Any helps???

Thanks
Note: I was not stuck anywhere. I had all partitioned formatted already and had no errors before this.

lemmyslender 2010-11-09 02:31
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
Quote:
Originally Posted by turbowei (Post 867613)
Note: I was not stuck anywhere. I had all partitioned formatted already and had no errors before this.
Post the installer.log from MyDocs/.nitdroid. You can read for clues about the problem, or post here for more help.

tubeat 2010-11-09 09:27
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
Quote:
Originally Posted by turbowei (Post 867613)
Note: I was not stuck anywhere. I had all partitioned formatted already and had no errors before this.
i close the x terminal n then i run nitdroid again and it works :D

tubeat 2010-11-09 09:28
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
how to install shootme btw??

louispires 2010-11-09 12:35
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE!
 
i need some help on this.

I have installed Nitdroid but have deleted it again, i still have the Popov and kernel files. How can i install Nitdroid again without having to download the files again??


All times are GMT. The time now is 05:52.
Page 62 of 77 « First 526061 62 636472 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8