maemo.org - Talk
Page 64 of 88 « First 546263 64 656674 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)
-   -   Maemo 5 PR1.1 released today (January 14) (https://talk.maemo.org/showthread.php?t=40421)

junooni 2010-01-14 18:00
Re: Maemo 5 PR1.1 released today (January 14)
 
updated over air, installed works fine. No significant changes, nothing new, nothing special. But hey what the heck, its better than nothing. by the way Im inToronto, Canada.

badboyuk 2010-01-14 18:01
Re: Maemo 5 PR1.1 released today (January 14)
 
can anyone tell me if its safe to do this update please???

As the previous update via NSU did not work and hanged at 1sec remaining!
I had re-flash it using the flasher tool.

:-S

adnanmbs 2010-01-14 18:05
Re: Maemo 5 PR1.1 released today (January 14)
 
Quote:
Originally Posted by badboyuk (Post 471551)
can anyone tell me if its safe to do this update please???

As the previous update via NSU did not work and hanged at 1sec remaining!
I had re-flash it using the flasher tool.

:-S
I am having the same problem as it is stuck at 1sec and its been 25 mins.. Please help as disconnecting will be a problem..What is the best solution..

Bingley Joe 2010-01-14 18:06
Re: Maemo 5 PR1.1 released today (January 14)
 
Quote:
Originally Posted by fanoush (Post 470712)
It will clear something but not everything so beware of bug 7432 - /opt and /home/user not cleared after firmware reflash

After reflashing and before installing anything else it might be useful to do cleanup in /opt at least. Otherwise you will have some dead weight there which will be hard to find later.
This info is somewhat troubling.

Now that this firmware has been released, I'd like to completely wipe the device when I install it so that it's as though it shipped OOTB with this firmware installed.

There's absolutely nothing on there that I care about keeping, so I have no interest whatsoever in data being left behind in /opt and /home/user...

What exactly are my options? Should I flash with the eMMC image, or does that come with other possible issues I should be aware of?

Or should I do a normal flash and then rm -rf /home/opt /home/user

Help greatly appreciated.

Laughingstok 2010-01-14 18:06
Re: Maemo 5 PR1.1 released today (January 14)
 
Unfortunately the best solution is to wait. :(

There is no other option in the middle of an update. You could try to shut it off and restart it in hopes that it was just some tiny little unimportant thing it got stuck on, but odds are it will not come up correctly and you will have to reflash.

Aranel 2010-01-14 18:10
Re: Maemo 5 PR1.1 released today (January 14)
 
Quote:
Originally Posted by NvyUs (Post 471458)
you need over 45mb free for OTA so go to here to look at how to free up space, you might also have conflicting package so might need some more help after freeing up space
http://wiki.maemo.org/Free_up_rootfs_space
Need more help :/ Freed up some space and now its 48 megabytes free, still no luck.

adnanmbs 2010-01-14 18:12
Re: Maemo 5 PR1.1 released today (January 14)
 
Quote:
Originally Posted by Laughingstok (Post 471568)
Unfortunately the best solution is to wait. :(

There is no other option in the middle of an update. You could try to shut it off and restart it in hopes that it was just some tiny little unimportant thing it got stuck on, but odds are it will not come up correctly and you will have to reflash.
Then how to i reflash the thing..I am not disconnecting it i do not mind leaving it for like 2 hours..But please tell me how to reflash if i disconnect it..

pycage 2010-01-14 18:14
Re: Maemo 5 PR1.1 released today (January 14)
 
Quote:
Originally Posted by Aranel (Post 471583)
Need more help :/ Freed up some space and now its 48 megabytes free, still no luck.
Space can't be the issue in your case. I successfully updated with only 40 MB free.
Maybe you got some conflicting packages so that the update cannot work. Either find and remove those (stuff from extras-devel perhaps) or flash via NSU or the command line flasher-3.5 tool.

Laughingstok 2010-01-14 18:14
Re: Maemo 5 PR1.1 released today (January 14)
 
Quote:
Originally Posted by adnanmbs (Post 471589)
Then how to i reflash the thing..I am not disconnecting it i do not mind leaving it for like 2 hours..But please tell me how to reflash if i disconnect it..
http://wiki.maemo.org/Updating_the_f..._.2F_Windows_7

phyneex 2010-01-14 18:15
Re: Maemo 5 PR1.1 released today (January 14)
 
Quote:
Originally Posted by junooni (Post 471546)
updated over air, installed works fine. No significant changes, nothing new, nothing special. But hey what the heck, its better than nothing. by the way Im inToronto, Canada.

Did you update it from the exclamation mark from the status area or in Application Manager ( Maemo 5 ) ?

Please help!


All times are GMT. The time now is 12:09.
Page 64 of 88 « First 546263 64 656674 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8