maemo.org - Talk
Page 65 of 349 « First 556364 65 666775 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Competitors (https://talk.maemo.org/forumdisplay.php?f=4)
-   -   Are you Ready? F(x)tec Pro 1 HW Keyboard Phone (https://talk.maemo.org/showthread.php?t=100554)

HtheB 2019-02-27 12:13
Re: Are you Ready? Fx HW Keyboard Phone
 
Quote:
Originally Posted by gtmaster303 (Post 1554422)
The whole website went down for a few mins. Guess they're making changes as we speak
Yes, I also noticed this. At first I thought it went through some DDOS

Dave999 2019-02-27 12:16
Re: Are you Ready? Fx HW Keyboard Phone
 
Quote:
Originally Posted by gtmaster303 (Post 1554422)
The whole website went down for a few mins. Guess they're making changes as we speak
WTF. Not ZERO down time for updates of such a cruel piece of software. :)

I guess it couldn’t handle the load when you tried the password ;)

frnk 2019-02-27 12:50
Re: Are you Ready? Fx HW Keyboard Phone
 
1 Attachment(s)
Mock up of size comparison with Motorola Photon Q
(I used a Note 8 for comparison, which has also a 6" screen and has similar (rounded) edges.) For the pocket, it should be fine, expecting it to be a bit thinner...

And: Note 8 has 6,3" (full rectangle) or (6,2" within rounded corners). So depending on the actual screen "6 inch" may perhaps vary and the real thing is even smaller than depicted here.

So it should be something like that:

(Yeah, my post # ... it's #666! :mad:)

Diamondback 2019-02-27 13:06
Re: Are you Ready? Fx HW Keyboard Phone
 
Let's see, we know the display is 18:9 6", that means that the short side is 6.8cm and the long one is 13.6cm.
Using these numbers and trying to measure some distances in the available photos, we'll end up with 0.5-1cm of top and bottom bars without display, optically it will be a bit less since the edge is curved.

frnk 2019-02-27 13:14
Re: Are you Ready? Fx HW Keyboard Phone
 
1 Attachment(s)
Quote:
Originally Posted by Diamondback (Post 1554426)
Let's see, we know the display is 18:9 6", that means that the short side is 6.8cm and the long one is 13.6cm.
Yeah, if 6" means *no more than* 6" that'd be good. I squeezed the Note 8 in my mock up for it's screen to fit your calculated dimensions:

(Anyway... enough Photon Q for now...)

HtheB 2019-02-27 13:42
Re: Are you Ready? Fx HW Keyboard Phone
 
Live stream:
https://www.mobileworldlive.com/studio-stream/

My feeling says:
The lady on the show (at 17:00 CET, which is less then 2,5 hours from now on!) will talk about the F(x) device..
;)

Diamondback 2019-02-27 13:51
Re: Are you Ready? Fx HW Keyboard Phone
 
Quote:
Originally Posted by HtheB (Post 1554428)
Live stream:
https://www.mobileworldlive.com/studio-stream/

My feeling says:
The lady on the show (at 17:00 CET, which is less then 2,5 hours from now on!) will talk about the F(x) device..
;)
What makes you feel that way? Are there any hints of this being relevant?

gtmaster303 2019-02-27 14:08
Re: Are you Ready? Fx HW Keyboard Phone
 
Quote:
Originally Posted by Diamondback (Post 1554429)
What makes you feel that way? Are there any hints of this being relevant?
Wondering the same as well. Where you getting your Intel from?

gtmaster303 2019-02-27 14:12
Re: Are you Ready? Fx HW Keyboard Phone
 
Quote:
Originally Posted by Diamondback (Post 1554426)
Let's see, we know the display is 18:9 6", that means that the short side is 6.8cm and the long one is 13.6cm.
Using these numbers and trying to measure some distances in the available photos, we'll end up with 0.5-1cm of top and bottom bars without display, optically it will be a bit less since the edge is curved.
I've estimated the device to be roughly 150x70mm. Thickness is probably going to be about 10mm give or take

hagiz 2019-02-27 14:17
Re: Are you Ready? Fx HW Keyboard Phone
 
Quote:
Originally Posted by gtmaster303 (Post 1554431)
I've estimated the device to be roughly 150x70mm. Thickness is probably going to be about 10mm give or take
If it's 10mm or under I'm happy. Well, happy either way, been waiting years for this, and if it materializes(with scandic keyboard), it might be the last qwerty slider ever released with decent specs.


All times are GMT. The time now is 09:02.
Page 65 of 349 « First 556364 65 666775 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8