Re: [Announce] USB hostmode beta release
 

Any one tested the flipSync USB keyring?

Would be much more convenient to carry around; I'll grab one when my student loan comes through to test it.

Re: [Announce] USB hostmode beta release
 

Errr
Honestly?
:eek:
/j

Re: [Announce] USB hostmode beta release
 

can anyone help me to install this USB host enabler in to my phone

thanks

Re: [Announce] USB hostmode beta release
 

can anyone guide me how to install this usb hostenabler in to my n900
thanks

Re: [Announce] USB hostmode beta release
 

Welcome to talk maemo.

Please read first post of thread where you are posting. We have support thread.

Re: USB host mode breaks after transmitting lots of data
 

To what value did you change it? what would be the best value to store permanentley for the device (to always be enabled even after boot)

Re: [Announce] USB hostmode beta release
 

Hostmode while charging


Plugged in memstick, by using http://talk.maemo.org/showthread.php...080#post907080 cable.
Started high speed hostmode, VBUS boost, and mounted.
THEN I plugged in the charger of cable nest linked above (it is very important to plug in the external charger after correct establishing of hostmode, particularly not before you've hit "VBUS boost on", in h-e-n GUI. Also do NOT connect the unpowered charger to cable after you started VBUS boost - either keep it plugged to cable from beginning and just plug into mains later, or first plug into mains and then to Y-cable)


t900:~# logger stopping vboost && boostoff
t900:~# ls /media/sda1/
Themroc [ Picoli - Dewaere - Miou Miou - Coluche ].avi joerg

t900:~# ./bin/bq27200.sh
LOOPMODE=0 RS=20
Reading values...........................done.

CSOC: 99 % RSOC: 99 %
Average Current: 200 mA
TTF: 65535 minutes TTE: 556 minutes (TimeToEmpty: it's discharging battery)
...

[edit: that's probably cruft, not needed when using the normal booston/off scripts]
t900:~# stop bme
bme (stop) running, process 22938
...
[/edit]

t900:~# ./charger
Charger: 0
Charge parameters programmed. Sleep 1...Status: 0x37
Status: 0x20 Mode: STANDBY Full: 0 WallCharger: 0 Battery Voltage: 3967 NAC: 1999 Battery level: 97 %
^C

t900:~# ./charger &
Charger: 0
Charge parameters programmed. Sleep 1...Status: 0x10
Status: 0x10 Mode: CHARGING Full: 0 WallCharger: 0 Battery Voltage: 4150 NAC: 1987 Battery level: 97 %
Status: 0x10 Mode: CHARGING Full: 0 WallCharger: 0 Battery Voltage: 4150 NAC: 1988 Battery level: 97 %
Status: 0x10 Mode: CHARGING Full: 0 WallCharger: 0 Battery Voltage: 4156 NAC: 1989 Battery level: 97 %

t900:~# ./bin/bq27200.sh
LOOPMODE=0 RS=20
Reading values...........................done.

CSOC: 97 % RSOC: 97 %
Average Current: 151 mA
TTF: 37 minutes TTE: 65535 minutes (TimeToFull: it's charging battery)

t900:~# ls -l /media/sda1/joerg/
-rw-r----- 1 user users 12150865 Oct 1 13:28 joerg_ct_01.pdf
-rw-r----- 1 user users 11813330 Oct 1 13:30 joerg_ct_01_2.pdf
-rw-r----- 1 user users 12290152 Oct 1 13:32 joerg_ct_02.pdf
-rw-r----- 1 user users 12334938 Oct 1 13:34 joerg_ct_02_2.pdf





I have an improved booston and boostoff script here, but it will work with the original one as well.
charger script is the one of ShadowJK: http://enivax.net/jk/n900/charge.sh.txt, only slightly renamed and some added debug prints.


To stop the whole thing, you first kill charger, then stop h-e-n

cheers
jOERG

Re: [Announce] USB hostmode beta release
 

Hi Guys,

I just installed h-e-n and did some experiments.
I could connect to my nokia 6110 in mass storage mode. I could access the data, the mount/unmount button didn't work though. Had to mount it manually.
I managed to connect with a extrememory micro sd/ms reader and mount a micro sd formatted with fat32 with the mount button.
I managed to connect a Kingston MobiliteG2 SD/micrSD reader and mount the card via the gui.

Copied some data too with the card readers.

Thanks for all the work you put into this project.

Regards
Aydan

Re: [Announce] USB hostmode beta release
 

I believe that's the length of the cables, not the actual unit.
The unit is no bigger than a normal car alarm fob.

Re: [Announce] USB hostmode beta release
 

Sorry to be the one to ask joerg, but do we need to utilise the script you've linked to allow charging during h--e-n? Or is the existing release capable of charging with the above careful steps?