maemo.org - Talk
Page 65 of 182 « First 556364 65 666775 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   The Other Half (https://talk.maemo.org/forumdisplay.php?f=59)
-   -   TOHKBD rev2 (https://talk.maemo.org/showthread.php?t=93156)

dirkvl 2014-11-06 20:29
Re: TOHKBD rev2
 
Quote:
Originally Posted by velox (Post 1446182)
I hope you'll not abandon your other projects/orders completely, because I for one ordered some funky qi/solar OHs in anticipation of the kickstarter to support you in advance. ;)
no worries! ;)

Dave999 2014-11-06 20:49
Re: TOHKBD rev2
 
Quote:
Originally Posted by dirkvl (Post 1446190)
no worries! ;)
Do you plan to buy one very advance 3D printer or several cheap ones?

hhbbap 2014-11-06 21:11
Re: TOHKBD rev2
 
Hello! Tipped off some Norwegian IT sites, but nothing (yet).
Found one here though:
https://www.geeky-gadgets.com/tohkbd...er-06-11-2014/

Dave999 2014-11-07 13:25
Re: TOHKBD rev2
 
We are stuck just below 100K :(

Mitrigol 2014-11-07 13:27
Re: TOHKBD rev2
 
Don't worry Dave, there are 26 days left :)

Dave999 2014-11-07 13:29
Re: TOHKBD rev2
 
Quote:
Originally Posted by Mitrigol (Post 1446247)
Don't worry Dave, there are 26 days left :)
It must be a bug in the counter. Call Kickstarter support. Call the police. Bring everyone...

dirkvl 2014-11-07 16:46
Re: TOHKBD rev2
 
Due to large overshoot, we can change to fancier magnets and thinner connection pads. This shaves some off the thickness.

Previously, the magnets were limiting factor, now the base pcb and casing wall thickness are limiting factors. Making the casing thinner is not possible and making the pcb thinner will increase the risk of making a bad connection.

New phone+base thickness: 11.5mm!


Also, managed to get a short term loan, so we can start ordering some custom parts and machinery. I've already ordered: pick&place machine, re-flow oven and solder stencil printer. This will speed up production a lot.

Delivery in April was very much on the safe side -better to be on that side- since I originally thought I'd do a month of marketing instead of hitting in 7 hours. So we can maybe/probably shave some weeks off.

Thoke 2014-11-07 16:55
Re: TOHKBD rev2
 
Great News!

Casanunda 2014-11-07 16:56
Re: TOHKBD rev2
 
Quote:
Originally Posted by dirkvl (Post 1446263)
Due to large overshoot, we can change to fancier magnets and thinner connection pads. This shaves some off the thickness. [...]
New phone+base thickness: 11.5mm!
Great to hear!

Quote:
Also, managed to get a short term loan [...]
So we can maybe/probably shave some weeks off.
Even better!
Can't wait to get this lovely device in my hands...

Thoke 2014-11-07 17:12
Re: TOHKBD rev2
 
Btw, you should advertise this in some form in your Kickstarter so this all doesn't go unnoticed ;)


All times are GMT. The time now is 16:58.
Page 65 of 182 « First 556364 65 666775 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8