maemo.org - Talk
Page 68 of 75 « First 586667 68 6970 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)
-   -   [Android] NITDroid V2 Development Topic (https://talk.maemo.org/showthread.php?t=49811)

maxximuscool 2010-07-11 01:41
Re: [Android] NITDroid V2 Development Topic
 
how do i disable RD mode?

Descalzo 2010-07-11 02:15
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by maxximuscool (Post 747666)
how do i disable RD mode?
See here

Have fun.

maxximuscool 2010-07-11 02:17
Re: [Android] NITDroid V2 Development Topic
 
How the hell do i get rid of the bios boot screen? I ran this to disable the RD mode:

c:\Program Files\maemo\flasher-3.5>
c:\Program Files\maemo\flasher-3.5>flasher-3.5 --disable-rd-mode --clear-rd-flag
s=no-lifeguard-reset

but still get the boot menu screen.

maxximuscool 2010-07-11 02:20
Re: [Android] NITDroid V2 Development Topic
 
Ahh I see i didn't add -R into the line. I actually cleared the rd flag as well to make sure the Nitdroid that didn't work won't causing the problem again. I'll try NITDroid again later. I need to do a proper partition. Autoinstaller failed badly.

fraad 2010-07-11 02:45
Re: [Android] NITDroid V2 Development Topic
 
well i give up for now doing all them comands on the n900 and it stiill did not work lol my eyes have gone now been looking at this for days

lostinmirkwood 2010-07-11 02:49
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by maxximuscool (Post 747644)
I'm currently partition my card to 2GB. I'm using 8G card. Got to reconvert the unsupported part to Fat32 after.
You need to format less then 2Gigs (say 1.9Gigs) as noted in the install instructions.

And there's no need for R&D mode, as mentioned in the install instructions.

To answer your question earlier, I'm not sure if the auto-installer works or not, but if you read the script it points to a rootfs that's two weeks old, the rootfs version you want is from yesterday.

lostinmirkwood 2010-07-11 02:51
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by fraad (Post 747692)
well i give up for now doing all them comands on the n900 and it stiill did not work lol my eyes have gone now been looking at this for days
If you ssh into your phone, you can just cut and paste the commands in bulk from your PC.

fraad 2010-07-11 03:21
Re: [Android] NITDroid V2 Development Topic
 
soz was haveing a wash and a coffee lol so how do u ssh ? dont no that way lol do u have to have phone to computer as well ?

stobbsc 2010-07-11 06:00
Re: [Android] NITDroid V2 Development Topic
 
oooops
Looks like my phone is in trouble.
I've had it working no problem, yesterday and this morning.
At the moment I can get to the boot menu, but then after I pic an option it just starts to load and then turns off.
I've tried booting up with the keyboard closed and it also only gets so far and then switches off.

Any advice from anyone would be great.

ToJa92 2010-07-11 06:22
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by maxximuscool (Post 747640)
are you sure? I'm assuming that it is up-to-date
Nope, the auto-installer is not up to date yet. It's going to be updated once I get some time to actually install the latest build.

@stobbsc: Try pulling out the battery and memory card for a few minutes, reinsert only the battery and try again.

kingoddball 2010-07-11 06:32
Re: [Android] NITDroid V2 Development Topic
 
where is nitdroid located in package manager????
i need to update my android to newest. where do i find the installer?
this is the first time ive tried doing it automaticallty (HAM).

stobbsc 2010-07-11 06:34
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by ToJa92 (Post 747797)
Nope, the auto-installer is not up to date yet. It's going to be updated once I get some time to actually install the latest build.

@stobbsc: Try pulling out the battery and memory card for a few minutes, reinsert only the battery and try again.
Thanks for the reply. I tried taking the battery and mem card out and then put the battery back in and that didn't work.

so if I just try and boot normally, I get all the boot text scrolling on the screen. The nokia wording then comes up and the phone vibrates then it goes back to text and then back to the Nokia wording with vibrate and then back to text and back to nokia wording one more time, then back to boot text and then it shuts down.

When I try and boot the droid os I select 4 from the bootmenu, and I get all the boot text and eventually it goes to the NITDROID screen with the Matrix style screen, then after a few seconds it goes back to text and the shuts the phone down.

I think I recall reading in the text somewhere on the boot screen that it couldn't ssh something something.
I'll try and record it so I can see more.

anymore help would be great.

stobbsc 2010-07-11 07:39
Re: [Android] NITDroid V2 Development Topic
 
is there a way I can flash my phone from pc?

maemosboy 2010-07-11 07:44
Re: [Android] NITDroid V2 Development Topic
 
1 Attachment(s)
I don't know if you allready have this patch in kernel or if it is even compatible, but i find this discussion:
http://www.mail-archive.com/android-.../msg10310.html
and thought if it helps mmc working?

sepehrsfmech 2010-07-11 08:11
Re: [Android] NITDroid V2 Development Topic
 
Guys i gotta question...
i installed nitdroid and partitioned...
but now im on the boot menu and there are 4 options.
which one do i go with?

bewrong 2010-07-11 08:21
Re: [Android] NITDroid V2 Development Topic
 
i have some questions about running android on n900.
* so the phone will run in dual boot? (maemo and android) if so, will you be able to choose at boot?
* can this be uninstalled?
* if there was a problem in installing android will it brick the phone? is it possible to restore it again?

sepehrsfmech 2010-07-11 08:25
Re: [Android] NITDroid V2 Development Topic
 
*yes you can
* i think formatting memory card will do it
*i got a problem at the boot, i flashedd my phone and it worked prefect

tobyax 2010-07-11 08:41
Re: [Android] NITDroid V2 Development Topic
 
I have a problem with the market does not download the 'application

stobbsc 2010-07-11 08:42
Re: [Android] NITDroid V2 Development Topic
 
how do I flash my phone if I can't boot it up fully?

nielsvg 2010-07-11 08:55
Re: [Android] NITDroid V2 Development Topic
 
nitdroid is slow on my phone

can i fix this?

i use 2gb mem card

maxximuscool 2010-07-11 08:56
Re: [Android] NITDroid V2 Development Topic
 
my phone now have the post boot text and cannot get rid of even after i disable the RnD mode. How do I get rid of this post boot? It's annoying looking at the post boot scripts on a phone, painfully that is. It's fine on the PC but this is not nice.

maxximuscool 2010-07-11 08:58
Re: [Android] NITDroid V2 Development Topic
 
I think i'm going to reflash my phone tomorrow. Since the custom kernel is not properly removed from my device. I still get the error: Custom kernel is unable to load.. blah blah.

Then I'll try this one again.

Dousan 2010-07-11 09:01
Re: [Android] NITDroid V2 Development Topic
 
Yesterday I got the marketplace to download by turning googletalk on, nice advice, thanks ;)

@Dj_steve or Jay-C is it possible in a future release of bootloader, for you to recompile one of the kernels to boot into maemo, so that the radio will work again. It's back to not working with the new bootloader, did try the 3 different options for maemo boot :)

sepehrsfmech 2010-07-11 09:07
Re: [Android] NITDroid V2 Development Topic
 
@stobbsc
u press the u button on the phone and connect the usb at the same time when its turned off.
and then do the instructions on the wiki to do it.

and steve, i know ur here.
which option do i press when i booting?

Chalupa 2010-07-11 09:25
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by sepehrsfmech (Post 747925)
and steve, i know ur here.
which option do i press when i booting?
wow, how rude. Why don't you try reading? http://talk.maemo.org/showthread.php...424#post746424

sepehrsfmech 2010-07-11 09:58
Re: [Android] NITDroid V2 Development Topic
 
tnx steve!!!!
and chalupa

maxximuscool 2010-07-11 10:10
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by stobbsc (Post 747903)
how do I flash my phone if I can't boot it up fully?
install Flasher 3.5 (windows 32bits)
go to flasher folder by use Windows Key+R (run) type CMD - Enter
in CMD: cd c:\program (press tab)\ maemo\flasher (press tab)
you should get this line:

cd "C:\Program Files\maemo\flasher-3.5"


Take the battery out of the phone for 10seconds, put it back in and press hold "U" button then plug in the microUSB.

in CMD: type this (assuming that you've downloaded those files already and put them in flasher folder in C-drive.)

(command below will format your eMMC, be sure to back up everything before doing so).

flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R

Take battery out and press U and plug microUSB and run the next command. (this will reinstal firmware)

flasher-3.5.exe -F RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin -f -R


You should get something like this: I reflashed mine just now lol. Because of i want my device to be cleaned again.
----------------------------------------------
----------------------------------------------

C:\Users\sopheak>cd "c:\Program Files\maemo\flasher-3.5"

c:\Program Files\maemo\flasher-3.5>cd "c:\Program Files\maemo\flasher-3.5"

c:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.
VANILLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': <no version>
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
Image(s) flashed successfully in 34.958 s (7321 kB/s)!

c:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.19-1.
002_PR_COMBINED_002_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

SW version in image: RX-51_2009SE_10.2010.19-1.002_PR_002
Image 'kernel', size 1705 kB
Version 2.6.28-20101501+0m5
Image 'rootfs', size 173696 kB
Version RX-51_2009SE_10.2010.19-1.002_PR_002
Image 'cmt-2nd', size 81408 bytes
Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
Version BB5_09.36
Image 'cmt-mcusw', size 5826 kB
Version rx51_ICPR82_10w08
Image '2nd', size 14720 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': <no version>
Sending xloader image (14 kB)...
100% (14 of 14 kB, avg. 3625 kB/s)
Sending secondary image (106 kB)...
100% (106 of 106 kB, avg. 15267 kB/s)
Flashing bootloader... done.
Sending cmt-2nd image (79 kB)...
100% (79 of 79 kB, avg. 13250 kB/s)
Sending cmt-algo image (507 kB)...
100% (507 of 507 kB, avg. 14930 kB/s)
Sending cmt-mcusw image (5826 kB)...
100% (5826 of 5826 kB, avg. 25555 kB/s)
Flashing cmt-mcusw... done.
Sending kernel image (1705 kB)...
100% (1705 of 1705 kB, avg. 23042 kB/s)
Flashing kernel... done.
Sending and flashing rootfs image (173696 kB)...
100% (173696 of 173696 kB, avg. 13175 kB/s)
Finishing flashing... done
CMT flashed successfully

c:\Program Files\maemo\flasher-3.5>

nielsvg 2010-07-11 10:21
Re: [Android] NITDroid V2 Development Topic
 
hey everybody,

i'm finding nitdroid very laggy on my phone. real slow.

And when i'm in the menu how can i go back to the begin screen? First it was with the backspace key but it doens't work.

tobyax 2010-07-11 10:23
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by Dousan (Post 747920)
Yesterday I got the marketplace to download by turning googletalk on, nice advice, thanks ;)
thankyou dousan, market now work perfect...

ToJa92 2010-07-11 10:31
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by nielsvg (Post 747988)
hey everybody,

i'm finding nitdroid very laggy on my phone. real slow.

And when i'm in the menu how can i go back to the begin screen? First it was with the backspace key but it doens't work.
Back key = Up arrow now
And disable animations in settings and it should run better.

~phoenix~ 2010-07-11 10:31
Re: [Android] NITDroid V2 Development Topic
 
thx for your work....

i'm still hoping for faster startup, and phone 3G support....

can i donate anywhere to support this projekt??

sry 4 my english....

ToJa92 2010-07-11 10:37
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by kingoddball (Post 747800)
where is nitdroid located in package manager????
i need to update my android to newest. where do i find the installer?
this is the first time ive tried doing it automaticallty (HAM).
Not done yet, I got to get my @$$ out of the chair and update the autoinstaller shell script :p

nielsvg 2010-07-11 10:47
Re: [Android] NITDroid V2 Development Topic
 
i dont get wifi to work with the latest version. it keeps scanning and then wants to get the ip adress of my wireless but then goes in a timeout and starts scanning again?

anybody?

Dousan 2010-07-11 10:53
Re: [Android] NITDroid V2 Development Topic
 
Anybody got the flashplayer 10.1 working? I've treid downloading through Adobes homepage and it seems to redirect to android market wich can't find the app. Allso tried it through gamtrailers.com through a link there and thats the same story, redirecting to android market. So how to get it to work. It should be downloadable cause of our NITdroid/android 2.2 froyo :)

Reffyyyy 2010-07-11 10:54
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by Dousan (Post 748016)
Anybody got the flashplayer 10.1 working? I've treid downloading through Adobes homepage and it seems to redirect to android market wich can't find the app. Allso tried it through gamtrailers.com through a link there and thats the same story, redirecting to android market. So how to get it to work. It should be downloadable cause of our NITdroid/android 2.2 froyo :)
Get a file manager from Android Market, navigate to root>extras and open it from there.

nielsvg 2010-07-11 10:59
Re: [Android] NITDroid V2 Development Topic
 
can someone please help? when i connect to my wifi it keeps retrieving the ip-adres???

Dousan 2010-07-11 11:00
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by Reffyyyy (Post 748018)
Get a file manager from Android Market, navigate to root>extras and open it from there.
Thanks wiil try that in astro file manager :)

@nielsvg have you tried boot option number 4 in bootloader. Just press the R button no need for blue arrow key ;)

nielsvg 2010-07-11 11:03
Re: [Android] NITDroid V2 Development Topic
 
Quote:
Originally Posted by Dousan (Post 748022)
Thanks wiil try that in astro file manager :)

@nielsvg have you tried boot option number 4 in bootloader. Just press the R button no need for blue arrow key ;)

yes i chose number 4 but it keeps scanning. where do i have to choose R?

weißelstone 2010-07-11 11:10
Re: [Android] NITDroid V2 Development Topic
 
nowhere. the 4 is on the R key. he ment you don't need the blue fn key

nielsvg 2010-07-11 11:12
Re: [Android] NITDroid V2 Development Topic
 
but i chose 4 in the bootmenu but i cant connect to my wifi. i entered my wep key but it keeps downloading the ip-adress and then it goes back to scanning.

it keeps going in a loop


All times are GMT. The time now is 23:53.
Page 68 of 75 « First 586667 68 6970 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8