| bbrindle |
2009-11-25 17:25 |
Re: N900 no mic audio
Here's my dmesg:
Code:
k quotas dquot_6.5.1
[ 2.553924] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.555419] msgmni has been set to 479
[ 2.555999] lowmem: Module initialized.
[ 2.564483] alg: No test for stdrng (krng)
[ 2.564636] io scheduler noop registered
[ 2.565032] io scheduler cfq registered (default)
[ 2.565429] OMAP DSS rev 2.0
[ 2.565551] OMAP DISPC rev 3.0
[ 2.565643] OMAP VENC rev 2
[ 2.573486] OMAP3 ROM RNG: initializing
[ 2.575683] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 2.582305] brd: module loaded
[ 2.584594] loop: module loaded
[ 2.584686] i2c /dev entries driver
[ 2.585845] input: triton2-pwrbutton as /class/input/input0
[ 2.610870] triton2 power button driver initialized
[ 2.611450] OneNAND driver initializing
[ 2.612670] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000
[ 2.612762] OneNAND Manufacturer: Samsung (0xec)
[ 2.612792] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
[ 2.612823] OneNAND version = 0x0121
[ 2.612854] Chip support all block unlock
[ 2.612854] Chip has 2 plane
[ 2.614471] Scanning device for bad blocks
[ 2.732238] Creating 6 MTD partitions on "omap2-onenand":
[ 2.732299] 0x00000000-0x00020000 : "bootloader"
[ 2.732666] 0x00020000-0x00080000 : "config"
[ 2.732940] 0x00080000-0x000c0000 : "log"
[ 2.735443] mtdoops: Attached to MTD device 2
[ 2.735504] 0x000c0000-0x002c0000 : "kernel"
[ 2.735748] 0x002c0000-0x004c0000 : "initfs"
[ 2.736083] 0x004c0000-0x10000000 : "rootfs"
[ 2.738250] UBI: attaching mtd5 to ubi0
[ 2.738311] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 2.738342] UBI: logical eraseblock size: 129024 bytes
[ 2.738372] UBI: smallest flash I/O unit: 2048
[ 2.738403] UBI: sub-page size: 512
[ 2.738433] UBI: VID header offset: 512 (aligned 512)
[ 2.738494] UBI: data offset: 2048
[ 2.874420] UBI: attached mtd5 to ubi0
[ 2.874481] UBI: MTD device name: "rootfs"
[ 2.874511] UBI: MTD device size: 251 MiB
[ 2.874542] UBI: number of good PEBs: 2010
[ 2.874572] UBI: number of bad PEBs: 0
[ 2.874603] UBI: max. allowed volumes: 128
[ 2.874633] UBI: wear-leveling threshold: 4096
[ 2.874664] UBI: number of internal volumes: 1
[ 2.874694] UBI: number of user volumes: 1
[ 2.874725] UBI: available PEBs: 0
[ 2.874755] UBI: total number of reserved PEBs: 2010
[ 2.874786] UBI: number of PEBs reserved for bad PEB handling: 20
[ 2.874816] UBI: max/mean erase counter: 7/3
[ 2.874847] UBI: image sequence number: 2
[ 2.875366] usbcore: registered new interface driver libusual
[ 2.875488] mtdoops: Ready 0, 1
[ 2.875518] UBI: background thread "ubi_bgt0d" started, PID 25
[ 2.892669] input: omap_twl4030keypad as /class/input/input1
[ 2.941223] cpuidle: using governor ladder
[ 2.941284] cpuidle: using governor menu
[ 2.941467] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[ 2.941711] ASoC version 0.13.2
[ 2.955322] AIC3X Audio Codec 0.2
[ 2.957885] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
[ 2.959411] asoc: Bluetooth codec <-> omap-mcbsp-dai-1 mapping ok
[ 3.011108] input: RX51 (tlv320aic3x) Jack as /class/input/input2
[ 3.035339] ALSA device list:
[ 3.035369] #0: RX51 (tlv320aic3x)
[ 3.035888] TCP cubic registered
[ 3.035919] NET: Registered protocol family 17
[ 3.035980] NET: Registered protocol family 15
[ 3.036041] Power Management for TI OMAP3.
[ 3.039428] pm_dbg_init()
[ 3.040222] SmartReflex driver initialized
[ 3.046875] Disabling unused clock "gpt2_ick"
[ 3.046966] Disabling unused clock "gpt3_ick"
[ 3.046997] Disabling unused clock "gpt4_ick"
[ 3.047027] Disabling unused clock "gpt5_ick"
[ 3.047088] Disabling unused clock "gpt6_ick"
[ 3.047119] Disabling unused clock "gpt7_ick"
[ 3.047149] Disabling unused clock "gpt8_ick"
[ 3.047180] Disabling unused clock "gpt9_ick"
[ 3.047210] Disabling unused clock "uart3_ick"
[ 3.047271] Disabling unused clock "gpio2_dbck"
[ 3.047302] Disabling unused clock "gpio3_dbck"
[ 3.047332] Disabling unused clock "gpio4_dbck"
[ 3.047363] Disabling unused clock "gpio5_dbck"
[ 3.047393] Disabling unused clock "gpio6_dbck"
[ 3.047424] Disabling unused clock "gpt9_fck"
[ 3.047485] Disabling unused clock "gpt8_fck"
[ 3.047515] Disabling unused clock "gpt7_fck"
[ 3.047546] Disabling unused clock "gpt6_fck"
[ 3.047576] Disabling unused clock "gpt5_fck"
[ 3.047607] Disabling unused clock "gpt4_fck"
[ 3.047637] Disabling unused clock "gpt3_fck"
[ 3.047668] Disabling unused clock "gpt2_fck"
[ 3.047729] Disabling unused clock "uart3_fck"
[ 3.047760] Disabling unused clock "wdt2_ick"
[ 3.047790] Disabling unused clock "wdt2_fck"
[ 3.047821] Disabling unused clock "gpio1_dbck"
[ 3.047882] Disabling unused clock "rng_ick"
[ 3.047912] Disabling unused clock "ssi_ick"
[ 3.047943] Disabling unused clock "gpt10_ick"
[ 3.047973] Disabling unused clock "gpt11_ick"
[ 3.048034] Disabling unused clock "uart1_ick"
[ 3.048065] Disabling unused clock "uart2_ick"
[ 3.048095] Disabling unused clock "usbtll_ick"
[ 3.048126] Disabling unused clock "ssi_ssr_fck"
[ 3.048187] Disabling unused clock "uart1_fck"
[ 3.048217] Disabling unused clock "uart2_fck"
[ 3.048278] Disabling unused clock "usbtll_fck"
[ 3.048400] Disabling unused clock "ts_fck"
[ 3.048431] Disabling unused clock "cpefuse_fck"
[ 3.048492] Disabling unused clock "gpt11_fck"
[ 3.048522] Disabling unused clock "gpt10_fck"
[ 3.048553] Disabling unused clock "dpll5_ck"
[ 3.048614] Disabling unused clock "dpll4_m6x2_ck"
[ 3.048675] Disabling unused clock "dpll4_m5x2_ck"
[ 3.048706] Disabling unused clock "dpll3_m3x2_ck"
[ 3.048736] Disabling unused clock "sys_clkout1"
[ 3.049133] Bootup reason: pwr_key
[ 3.049224] OMAP GPIO switch handler initializing
[ 3.051727] slide (GPIO 71) is now open
[ 3.051788] proximity (GPIO 89) is now open
[ 3.051818] kb_lock (GPIO 113) is now open
[ 3.051849] headphone (GPIO 177) is now disconnected
[ 3.051879] cam_shutter (GPIO 110) is now closed
[ 3.051910] cam_launch (GPIO 69) is now inactive
[ 3.051940] cam_focus (GPIO 68) is now inactive
[ 3.051971] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 3.064239] omapfb: acx565akm rev 8b LCD detected
[ 3.071472] tpa6130a2 2-0060: Headphone amplifier initialized successfully
[ 3.117706] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 3.117767] UBIFS: file system size: 254822400 bytes (248850 KiB, 243 MiB, 1975 LEBs)
[ 3.117828] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 3.117889] UBIFS: media format: 4 (latest is 4)
[ 3.117919] UBIFS: default compressor: lzo
[ 3.117950] UBIFS: reserved for root: 4384586 bytes (4281 KiB)
[ 3.118469] VFS: Mounted root (ubifs filesystem).
[ 3.118774] Freeing init memory: 144K
[ 4.601104] Registered led device: twl4030:vibrator
[ 4.746398] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 4.828094] tsl2563 2-0029: model 7, rev. 0
[ 4.887847] lp5523 2-0032: LP5523 Programmable led chip found
[ 4.988220] Linux video capture interface: v2.00
[ 5.056274] I2C driver for Si4713 FM Radio Transmitter
[ 5.833007] Bluetooth: Core ver 2.15
[ 5.839660] NET: Registered protocol family 31
[ 5.839691] Bluetooth: HCI device and connection manager initialized
[ 5.839752] Bluetooth: HCI socket layer initialized
[ 5.884399] i2c_omap i2c_omap.2: controller timed out
[ 5.903808] hci_h4p hci_h4p: Registering HCI H4P device
[ 5.942108] lp5523 2-0032: got interrupt from led chip
[ 5.942657] lp5523 2-0032: interrupt from led chip 4f
[ 5.942687] lp5523 2-0032: all engines configured
[ 5.942718] lp5523 2-0032: disabling engines
[ 5.943328] Registered led device: lp5523:kb1
[ 5.943481] Registered led device: lp5523:kb2
[ 5.943603] Registered led device: lp5523:kb3
[ 5.943756] Registered led device: lp5523:kb4
[ 5.943908] Registered led device: lp5523:b
[ 5.944030] Registered led device: lp5523:g
[ 5.944183] Registered led device: lp5523:r
[ 5.944305] Registered led device: lp5523:kb5
[ 5.944458] Registered led device: lp5523:kb6
[ 6.016662] nokia-av nokia-av: accessory detect module initialized
[ 6.026336] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown
[ 6.085113] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
[ 6.128509] TSC2005 driver initializing
[ 6.129211] input: TSC2005 touchscreen as /class/input/input3
[ 6.220855] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
[ 6.377288] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on
[ 6.390777] SSI DRIVER Version 1.1-rc2
[ 6.391265] omap_ssi omap_ssi: SSI Hardware REVISION 1.0
[ 6.487884] phy0: Selected rate control algorithm 'minstrel'
[ 6.521759] smc91x: not found (-19).
[ 6.533386] wl1251: loaded
[ 6.534118] wl1251: initialized
[ 6.644256] mmc1: new high speed MMC card at address 0001
[ 6.650482] mmcblk0: mmc1:0001 MMC32G 29.8 GiB
[ 6.650787] mmcblk0: p1 p2 p3
[ 6.902954] CMT speech driver v0.2.0
[ 6.920043] NET: Registered protocol family 35
[ 6.952606] SSI McSAAB PROTOCOL Version: 2.0-rc1
[ 7.213653] dspbridge_init: 412800 bytes @ 80600000
[ 7.301361] omap-iommu omap-iommu.1: isp registered
[ 7.472473] omap-iommu omap-iommu.1: isp: version 1.1
[ 7.629333] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
[ 7.655975] smia_reglist_import: meta_reglist version 2009-07-27
[ 7.656066] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/1502 ptr d0c392a0
[ 7.656066] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/3003 ptr d0c39228
[ 7.656097] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39090
[ 7.656127] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39038
[ 7.666992] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
[ 7.691497] smia_reglist_import: meta_reglist version V14 03-June-2008
[ 7.691558] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0c3c1f4
[ 7.691589] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0c3c454
[ 7.691619] smia_reglist_import: type 10 w 1296 h 984 fmt 30314142 ival 100/501 ptr d0c3c57c
[ 7.691619] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0c3c614
[ 7.691650] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0c3c28c
[ 7.691680] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0c3c324
[ 7.691680] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0c3c4e4
[ 7.691711] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0c3c3bc
[ 7.691711] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0c3c04c
[ 8.315582] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
[ 8.315643] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
[ 8.315704] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 8.316284] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 8.316741] usb usb1: configuration #1 chosen from 1 choice
[ 8.316955] hub 1-0:1.0: USB hub found
[ 8.317047] hub 1-0:1.0: 1 port detected
[ 14.849426] kjournald starting. Commit interval 1 seconds
[ 14.860595] EXT3 FS on mmcblk0p2, internal journal
[ 14.860626] EXT3-fs: mounted filesystem with writeback data mode.
[ 15.260711] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
[ 15.486511] McSAAB: ACWAKE DOWN
[ 15.486572] McSAAB: ACWAKE UP
[ 15.486663] McSAAB: WAKELINES TEST OK
[ 15.822204] Bluetooth: L2CAP ver 2.13
[ 15.822235] Bluetooth: L2CAP socket layer initialized
[ 15.923706] Bluetooth: SCO (Voice Link) ver 0.6
[ 15.923736] Bluetooth: SCO socket layer initialized
[ 15.927551] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
[ 16.461975] Bluetooth: RFCOMM socket layer initialized
[ 16.462066] Bluetooth: RFCOMM TTY layer initialized
[ 16.462097] Bluetooth: RFCOMM ver 1.11
[ 20.272705] misc iphb: Module registered in 2.6.28-omap1, built Oct 28 2009 15:33:55
[ 40.269561] warning: `dnsmasq' uses 32-bit capabilities (legacy support in use)
[ 45.780883] cfg80211: Regulatory domain changed to country: US
[ 45.780944] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 45.780944] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 45.780975] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 45.780975] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 45.781005] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 45.781005] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 45.781036] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 47.212860] wl12xx spi4.0: firmware: requesting wl1251-fw.bin
[ 48.368927] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 48.384552] wl1251: firmware booted (Rev 6.0.4.156)
[ 49.153106] SCSI subsystem initialized
[ 49.485717] Driver 'sd' needs updating - please use bus_type methods
[ 49.979003] wl1251: down
request
|
