maemo.org - Talk
Page 7 of 13 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)
-   -   [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller* (https://talk.maemo.org/showthread.php?t=61896)

fahadj2003 2010-09-08 16:12
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
Quote:
Originally Posted by olympus (Post 810776)
I did this:

1)http://forum.nitdroid.com/index.php?topic=315.0 <---- download 0.0.8 version

2)copy the file to emmc via mass storage mode

3)disconnect from mass storage

4) open xterm
sudo gainroot
mkfs.ext3 /dev/mmcblk1p2
mount /dev/mmcblk1p2 /and
cd /and
bunzip2 /home/user/MyDocs/NitDroid-0.0.8-Popov.tar.bz2
tar xvf /home/user/MyDocs/NitDroid-0.0.8-Popov.tar
dpkg -i /home/user/MyDocs/.nitdroid/nitdroid-kernel-2.6.28-06_final1_armel.deb

So then i rebooted and the device just shut down. Now if i press the power button it vibrates, shows NOKIA logo and then shuts down again.

and yes i had nitdroid 0.0.7 installed with autoinstaller..
is ur battery full?
otherwise u can flash the kernel..
u dun need to flash the full firmware
http://rapidshare.com/files/41787469...2.6.28-maemo40
flasher-3.5 -l -b -k <kernel>
you can say thanks
this is temp btw.. it jus loads the kernel so that u can find out what u did wrong..
but if u wanna flash it, replace the -l with -f
btw, check the battery first..
i think thats the issue

olympus 2010-09-08 16:19
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
nope, the battery is not the issue, i had 81% before i rebooted.. i'll try your first advice, thanks for now.

Deaconclgi 2010-09-08 16:27
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
Quote:
Originally Posted by dj_steve (Post 810580)
the nitdroid installer will now install this version, have tested and works here
Hello dj_steve,

Are you going to update the post on http://forum.nitdroid.com/index.php?topic=315.0 to show that the installer works with 0.0.08 now?

I may update this afternoon. Spotty 3G coverage inside the school....and crazy secure Hidden Wifi......

Thank you and your team for all of the work on NITDroid

Bobbe 2010-09-08 16:31
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
Quote:
Originally Posted by fahadj2003 (Post 810152)
*THIS IS FOR SD, NOT EMMC*
*WORKS PROPERLY*
(...)
You should probably mention this is only for those who have already installed nitdroid-installer before.

fahadj2003 2010-09-08 16:43
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
Quote:
Originally Posted by Bobbe (Post 810818)
You should probably mention this is only for those who have already installed nitdroid-installer before.
ughhh
i think thats the heading of the post
"[updated] NITdroid 0.0.8 HOWTO Install ****assuming you've used autoinstaller*****

i mean cmon.. if ppl cant even read the full thing, then only god can help them..

rolan900d 2010-09-08 16:57
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
After installation, can we delete that Nitdroid-0.0.8-Popov.tar.bz2 wich I dropped in /home/user/MyDocs ???

Thanks for the update folks!

peynaud 2010-09-08 17:12
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
What wifi speeds are you getting under nitdroid 0.0.8?

It's taking me like 3 hours to download a 6Mb file.

What do you think is my problem? I was getting great speeds in 0.0.7.

fahadj2003 2010-09-08 17:13
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
Quote:
Originally Posted by rolan900d (Post 810836)
After installation, can we delete that Nitdroid-0.0.8-Popov.tar.bz2 wich I dropped in /home/user/MyDocs ???

Thanks for the update folks!
yes u can

other guy, dunno
i think its the airplane mode?
im not using nitdroid atm

rolan900d 2010-09-08 17:20
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
Quote:
Originally Posted by fahadj2003 (Post 810848)
yes u can

other guy, dunno
i think its the airplane mode?
im not using nitdroid atm
Thanks....
Was that airplane mode answer for me?
I didn't get it...

Still have to read the official chnagelog, but the wifi setup won't work for me...
It takes more than 10 min. already?!

olympus 2010-09-08 17:30
Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*
 
Quote:
Originally Posted by fahadj2003 (Post 810798)
is ur battery full?
otherwise u can flash the kernel..
u dun need to flash the full firmware
http://rapidshare.com/files/41787469...2.6.28-maemo40
flasher-3.5 -l -b -k <kernel>
you can say thanks
this is temp btw.. it jus loads the kernel so that u can find out what u did wrong..
but if u wanna flash it, replace the -l with -f
btw, check the battery first..
i think thats the issue
so i flashed with this temp kernel and it looked promissing, the 5 dots we're flashing on the screen and i thought that i was saved but then the device turned off once again before maemo loaded up. i tried it a couple more times but every time the same result. any other suggestions maybe? thanks in advance!


All times are GMT. The time now is 15:54.
Page 7 of 13 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8