maemo.org - Talk
Page 7 of 11 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu (https://talk.maemo.org/showthread.php?t=84725)

MohammadAG 2012-07-17 16:08
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
MT-Toggles V0.3-1 out:
* Add press and hold functionality
* Added conflict cellular-toggle v0.0.1
That should prevent any more boot loops hopefully.

V0.3-1 include a press and hold functionality, holding the bluetooth toggle opens up the bluetooth settings page.

MohammadAG 2012-07-17 16:10
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by kai_en (Post 1238792)
so that means I should uninstall cellular toggle if I manage to boot up?

By the way i manage to boot up but once the icons are loading that's when I get restarted again
Yes, the restarts are because if system-ui restarts 3 times in a row the system is rebooted.

There are two ways to fix it, the first is the recovery initrd, which will trigger the warranty void warning and open mode. The second is trying to uninstall it quick (over SSH or otherwise), try plugging in a USB cable into a PC and booting up.

I'm not sure if R&D mode would help, never tried it on Harmattan
Code:
flasher --enable-rd-mode --set-rd-flags=no-lifeguard-reset

kai_en 2012-07-17 16:43
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by MohammadAG (Post 1238802)
Yes, the restarts are because if system-ui restarts 3 times in a row the system is rebooted.

There are two ways to fix it, the first is the recovery initrd, which will trigger the warranty void warning and open mode. The second is trying to uninstall it quick (over SSH or otherwise), try plugging in a USB cable into a PC and booting up.

I'm not sure if R&D mode would help, never tried it on Harmattan
Code:
flasher --enable-rd-mode --set-rd-flags=no-lifeguard-reset
Please walk me through a bit more, I am quite new on in this.

First method you talked about is done via flasher installed on my PC as described in this threa right? http://talk.maemo.org/showthread.php...ighlight=Flash

And use the following code? Would I need to download anything from Navifirm?

Code:
flasher --enable-rd-mode --set-rd-flags=no-lifeguard-reset
Second mode via SSH? means I need to establish wifi connection extremely quick? That would quite impossible for me, seeing that I can only manage to load up the desktop icons before rebooting again.

MohammadAG 2012-07-17 17:06
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
No, no extra downloads needed, it just sets a flag in CAL

kai_en 2012-07-17 17:09
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
I just used the code

Code:
flasher --enable-rd-mode --set-rd-flags=no-lifeguard-reset
And I am seeing a picture of a spannar but it does nothing otherwise, it's not moving or what so ever.

EDIT: Okay, I managed to boot up with that flash code. Thank god! So now I shall update MT-Toggle and should be able to install cellular toggle again?

By the way, do I need to set anything back is the flasher? Disable R&D mode or something? :confused:

EDIT EDIT: I was using Coderus' Toggle Icons previously, still safe to use his toggles on MT 0.3-1? I really to prefer without the toggles below as it's tacking too much space

MohammadAG 2012-07-17 17:32
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by kai_en (Post 1238825)
I just used the code

Code:
flasher --enable-rd-mode --set-rd-flags=no-lifeguard-reset
And I am seeing a picture of a spannar but it does nothing otherwise, it's not moving or what so ever.

EDIT: Okay, I managed to boot up with that flash code. Thank god! So now I shall update MT-Toggle and should be able to install cellular toggle again?

By the way, do I need to set anything back is the flasher? Disable R&D mode or something? :confused:

EDIT EDIT: I was using Coderus' Toggle Icons previously, still safe to use his toggles on MT 0.3-1? I really to prefer without the toggles below as it's tacking too much space
I'm not sure about coderus's widgets, they used a modified mt-toggles and they're not open source.

cellular-toggle conflicts with mt-toggles, I might provide a different toggle that offers the same features.

Oh and yes, after uninstalling cellular-toggle:
Code:
flasher --disable-rd-mode

coderus 2012-07-17 17:36
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
LOL Mohammad, i send you link to sources to skype many weeks ago. if you don't want to use my hacks say it, don't be so rude.

MohammadAG 2012-07-17 17:40
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by coderus (Post 1238847)
LOL Mohammad, i send you link to sources to skype many weeks ago. if you don't want to use my hacks say it, don't be so rude.
I didn't check them to be honest (whether or not they included your toggles or not), I asked you to publish patches to github and you ignored that.

coderus 2012-07-17 17:45
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
so, we talked, you said you can download sources from archive. no, can't? it's not my problems, sorry. it's not so hard to login to skype and receive link. you don't want? oh.

coderus 2012-07-17 17:52
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
http://dl.dropbox.com/u/26659227/harmattan/sources.zip

now you can download it? oh, am i too late? you don't want to use my hacks now? sadly )=

MohammadAG 2012-07-17 17:54
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Look, you're free to provide a patch on github. I'm not going to cherry pick your source file.
In any case your attitude is getting annoying.

kai_en 2012-07-17 17:55
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Okay chill chill, please don't be hostile towards each other, both of your produced extremely useful work

MohammadAG, feature such as cellular toggle would be great. I would carefully stick to your toggles right now as I wanted to use Status updater and Music player widget on top of your un-restricted-UI modification.

Anyway, a slight suggestion to the Toggles are to actually remove the toggles below and made them as just icons instead. They took too much space to be honest.

coderus 2012-07-17 18:00
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Mohammad, i don't want to fix your new mt-toggles.
If you want you can make ur own cellular toggle, it's easy.

Bye now (=

TMavica 2012-07-17 18:27
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
MohammadAG, just do a normal upgrade? no need incept seperately?

Boxeri 2012-07-17 18:39
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by TMavica (Post 1238877)
MohammadAG, just do a normal upgrade? no need incept seperately?

If you have installed MAGs own repository you can update via the normal procedure of the N9. Setting -> application etc...


Nice update, especially on the new Bluetooth functionality. It was exactly what I had hoped for couple of pages ago.

Great job as always, and I personally think that the switches are good just as they are. They are at least almoust consistent with the rest of the UI

MohammadAG 2012-07-17 18:47
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by TMavica (Post 1238877)
MohammadAG, just do a normal upgrade? no need incept seperately?
Yes, that's the point of the repository :)

A sneak peak

http://i47.tinypic.com/20gmyps.jpg

It will reuse code from hqh's fapman for APT handling, Aegis will make it a lot harder since apps can't run as root, only daemons :/

Arie 2012-07-17 18:54
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by MohammadAG (Post 1238886)
Yes, that's the point of the repository :)

A sneak peak

http://i47.tinypic.com/20gmyps.jpg

It will reuse code from hqh's fapman for APT handling, Aegis will make it a lot harder since apps can't run as root, only daemons :/
Even with inception?

MohammadAG 2012-07-17 18:57
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by Arie (Post 1238891)
Even with inception?
Even with anything, trying running music-suite as root, or Sociality, etc

Arie 2012-07-17 19:00
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by MohammadAG (Post 1238893)
Even with anything, trying running music-suite as root, or Sociality, etc
That's true, I misread what you wrote as something else. Thanks for answering my noobish question.

Any luck with figuring out why I can't use Socialty, I'd love to replace fmobi and support MohammadAG's platform :)

SolarisSixth 2012-07-17 20:02
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
So, I just ran the updates that were pushed on top of coderu's mt-toggles and toggles... and it resulted in a boot loop...

whoops, my bad, will fix it

MaddogG 2012-07-17 20:26
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by cynik606 (Post 1238461)
Strange. Suddenly Flight-Mode toggle stopped to work :(
I've tried uninstall, reboot and install it once again. No luck :/
Same problem here...

Iryus 2012-07-17 21:02
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by MaddogG (Post 1238945)
Same problem here...
read previous post ;)

guillermorojaz 2012-07-17 23:14
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
devel-su
password:


~# apt-get upgrade

guillermorojaz 2012-07-17 23:22
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Upgrade to the v0.3-1
THANK MohammadAG
In which are hosted repository files in this version?

kai_en 2012-07-17 23:38
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by Boxeri (Post 1238885)
If you have installed MAGs own repository you can update via the normal procedure of the N9. Setting -> application etc...


Nice update, especially on the new Bluetooth functionality. It was exactly what I had hoped for couple of pages ago.

Great job as always, and I personally think that the switches are good just as they are. They are at least almoust consistent with the rest of the UI
I agree that switches actually does make quite good UI consistency, however that is when I placesthe mt-toggles right below, just above social updater. However, if I place the toggles right below the volume indicators, I find that the switches cramped up the space below and appeared too near to the next item.

eltoffer 2012-07-18 00:32
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
why CODERUS toggles are not compatible with your mt-toggle 0.3.1???? i got a boot-loop :/

SolarisSixth 2012-07-18 01:10
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by eltoffer (Post 1239054)
why CODERUS toggles are not compatible with your mt-toggle 0.3.1???? i got a boot-loop :/
Yup. I got a boot loop too. Dumb us for not removing them first. Ask Coderus, he's the one who decided to make his own version.

SolarisSixth 2012-07-18 01:29
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
You know, until there is a application manager solution, there is a temporary option I've been using, that works out really well.

http://store.ovi.com/content/220215?...e=search&pos=1

This is basically a UI for all your installed repositories, it works really well, just be wary of packages that aren't mean to work on Harmattan.

Anyway, after you install the incepted repository, you can browse it with meecatalog, and install the applications, they work fine, i've tested it, and since the repository is incepted, there are no issues.

Give it a try.

http://i.imgur.com/gUZJQ.png
http://i.imgur.com/RciP4.png

rahulthewall 2012-07-18 06:14
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by MohammadAG (Post 1238746)
MT-Toggles V0.2:
* Aligned first icon with rest of icons.
Update via Harmatatn inception repo
Many thanks for this.

mdbxh 2012-07-18 06:23
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by MohammadAG (Post 1238801)
MT-Toggles V0.3-1 out:
* Add press and hold functionality
* Added conflict cellular-toggle v0.0.1
That should prevent any more boot loops hopefully.

V0.3-1 include a press and hold functionality, holding the bluetooth toggle opens up the bluetooth settings page.
where can i upgrade V0.3.1?:mad::mad::mad::mad::mad:

Schturman 2012-07-18 06:36
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Someone know why I always got this error in facebook quick status updater... Tried uninstall/reinstall, not help...

http://img827.imageshack.us/img827/1...0718034202.png

MohammadAG 2012-07-18 08:24
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Logout and log back in, see first post in correct thread for how to.

baem90 2012-07-18 08:35
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by Schturman (Post 1239102)
Someone know why I always got this error in facebook quick status updater... Tried uninstall/reinstall, not help...

http://img827.imageshack.us/img827/1...0718034202.png
Quote:
Originally Posted by ibrakalifa (Post 1223728)
Run as user
social-status-updater-config
hope this will help..

guillermorojaz 2012-07-18 09:15
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Someone give me the address of the repository of version 0.3

thedead1440 2012-07-18 09:31
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by guillermorojaz (Post 1239158)
Someone give me the address of the repository of version 0.3
just add MAG's repo
apt-get update
install toggles

when you want to update the toggles,
settings --> applications --> manage installations --> update tab click refresh and voila you'll get all the updates there...

emam damon 2012-07-18 09:50
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by thedead1440 (Post 1239166)
just add MAG's repo
apt-get update
install toggles

when you want to update the toggles,
settings --> applications --> manage installations --> update tab click refresh and voila you'll get all the updates there...
tanx mate.where can i get the MAG's repo?

thedead1440 2012-07-18 10:03
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by emam damon (Post 1239174)
tanx mate.where can i get the MAG's repo?
http://talk.maemo.org/showthread.php?t=85438

kai_en 2012-07-18 11:41
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by Schturman (Post 1239102)
Someone know why I always got this error in facebook quick status updater... Tried uninstall/reinstall, not help...

http://img827.imageshack.us/img827/1...0718034202.png
Besides this error, the "Unable to post update" error happens frequently too update some long interval (hours?) of logged in. A logged out and a log in will solve the problem but I suspect this is caused by Sociality/Quick Status Updater's inability to maintain login to FB for long period. Right?

ThraxZzz 2012-07-18 13:02
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Lol,Reboot loops,damn

Fallenzone 2012-07-18 14:15
Re: [Announce] MT-Toggles | Toggle platform for Harmatatn's status menu
 
Quote:
Originally Posted by ThraxZzz (Post 1239241)
Lol,Reboot loops,damn

same as me .....

don't know how to solve it ....


All times are GMT. The time now is 01:46.
Page 7 of 11 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8