Re: [Announce] USB hostmode beta release
 

No, sorry, this is absolutely useless, it has everything until the point where it starts getting interesting. The part missing is what follows in log starting from end of this log when the actual problem with h-e-n connecting happens, until - and including - the trailing part you posted before.

Honestly we can't debug a problem from a log taken when the problem doesn't happen. What's needed is a full log of an example of the problem, not an arbitrary log of system startup until the point where we would start to get into trouble and then stopping there.

/j

Re: [Announce] USB hostmode beta release
 

sorry for the patchy posts. please find attached the complete log in the attachments
hope you can help
thanks

Re: [Announce] USB hostmode beta release
 

Sorry for OT but message "HWRecoveryResetSGX: SGX Hardware Recovery triggered" seen in your logs should remind you to
1. Lower your max CPU/DSP overclock (if your n900 is overclocked) or raise voltages
2. Power cycle it (with removing battery before power-up just in case)

and the message "Maybe the USB cable is bad?" probably means something. What is your F/F USB adapter?

Re: [Announce] USB hostmode beta release
 

I see it's hard to get a complete log from dmesg. Sorry my fault.

Please
install sysklogd, [ apt-get install sysklogd ]
reboot,
check if you got a proper /var/log/syslog file [ tail /var/log/syslog ]
start h-e-n,
if you bother, insert a note about the fact to syslog [ logger '###########h-e-n gui started#######' ]
plug in your problematic device,
click speed, vbus in h-e-n GUI
if you bother, insert a note about the fact to syslog [ logger '###########h-e-n vbus clicked#######' ]
wait 15 seconds
click enumerate in h-e-n GUI
wait another 15 sec
close h-e-n
send the file here [ cp /var/log/syslog someplace/h-e-n_syslog.txt; attach someplace/h-e-n_syslog.txt to a post here ]

don't forget to reset the syslog file every now and then ( once a week? [ echo >/var/log/syslog ]), or uninstall sysklogd pkg eventually. If you don't either, your rootfs will fill up eventually, that's not a good thing long term.

Thanks again for helping with this, and sorry for my lack to notice what's the problem with those logs.

cheers
jOERG

Re: [Announce] USB hostmode beta release
 

want to know if anyones got a wireless mouse or keyboard working. ive tried it with no luck..

Re: [Announce] USB hostmode beta release
 

Please read complete problems thread, there are reports about success.
please read post #9 http://talk.maemo.org/showthread.php...309#post866309

((hint: a wireless mouse and kbd usually isn't much different to a cable variant))

Thanks
/j

Re: [Announce] USB hostmode beta release
 

Sorry to see the thread getting OT with h-e-n "problems", joerg_rw.

I'm curious to know how progress is going on jrbme? :)

Re: [Announce] USB hostmode beta release
 

ummm??? here?
http://talk.maemo.org/showpost.php?p=872646&postcount=9

Re: [Announce] USB hostmode beta release
 

GREETS AGAIN.
I have a question for which no one anywhere I can not answer.
As you can see it is possible (http://www.youtube.com/watch?v=zDzUG-bno6Q ) I have the same dvd-rom.
I have a kernel-power in 45, and additions to handle MohammadAG cd-rom.
information to the kernel.

[5162.718414] USB Mass Storage support registered.
[5162.721343] usb-storage: device found at 3
[5162.721374] usb-storage: waiting for device to settle before scanning
[5167.715332] usb-storage: device scan complete
[5167.716674] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SE-T084M TD00 PQ: 0 ANSI: 0
NO dev/sr0
Where should I look for and ask nowhere and interest solution to this issue.

THANK YOU GREETS

Re: [Announce] USB hostmode beta release
 

Hey! sorry for my long absence... i got a new usb hub... it WORKED :)... still need some help though... i tried a USB Flash drive.. the kernel messages show the device with correct volume and everythig :) but its not mounting the device on my file manager or even on cuteexplorer...
Thanks so much for all your help!