maemo.org - Talk
Page 73 of 77 « First 637172 73 7475 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)
-   -   Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45! (https://talk.maemo.org/showthread.php?t=61338)

mido.fayad 2010-12-04 18:16
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
Quote:
Originally Posted by Armstrong Dicksmasher (Post 889219)
Regarding the USB Flash Mode with NITDroid,

How should we execute the "echo /dev/block/vold/179:9 > /sys/devices/platform/musb_hdrc/gadget/lun0/file" command?

Android terminal don't allow typing " < " symbol.
ADB doesn't seem to be working also.
you can use better terminal emulator an it works fine and i can type all symbols without any problem

Armstrong Dicksmasher 2010-12-04 19:08
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
Quote:
Originally Posted by e-yes (Post 889233)
adb shell work for me.
dmesg | tail (on host system):
Code:
[ 5993.646383] usb 1-1.2: new high speed USB device using ehci_hcd and address 6

[ 5993.731621] scsi4 : usb-storage 1-1.2:1.0

[ 5994.730052] scsi 4:0:0:0: Direct-Access    Nokia    N900              031 PQ: 0 ANSI: 2

[ 5994.730415] scsi 4:0:0:1: Direct-Access    Nokia    N900              031 PQ: 0 ANSI: 2

[ 5994.731523] sd 4:0:0:0: Attached scsi generic sg3 type 0

[ 5994.731758] sd 4:0:0:1: Attached scsi generic sg4 type 0

[ 5994.736291] sd 4:0:0:0: [sdc] Attached SCSI removable disk

[ 5994.736912] sd 4:0:0:1: [sdd] Attached SCSI removable disk

[ 6506.559768] usb 1-1.2: USB disconnect, address 6

[ 7246.436246] usb 1-1.2: new high speed USB device using ehci_hcd and address 7

[ 7246.521264] scsi5 : usb-storage 1-1.2:1.0

[ 7247.524917] scsi 5:0:0:0: Direct-Access    <NULL>  <NULL>          0000 PQ: 0 ANSI: 2

[ 7247.525485] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 7247.528024] sd 5:0:0:0: [sdc] Attached SCSI removable disk
However, sdc* is not visible in /proc/partitions, but launch of fdisk /dev/sdc fixes this.
Which driver are you using for usb debug on N900?

e-yes 2010-12-04 20:46
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
Quote:
Originally Posted by Armstrong Dicksmasher (Post 889284)
Which driver are you using for usb debug on N900?
??

adb doesn't require _driver_ in linux, iirc.

ing005 2010-12-05 06:57
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
can't remove nitdroid-kernel please help

ncoder 2010-12-08 11:28
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
Hi community,

yesterday, I installed NITDroid 2.6.28.NIT.06 in my N900. I did follow manual installation methods to install NITDroid in my 4gb sdcard. But now I can't able to boot maemo OS from multiboot menu. Press '0' or 'b' doesn't help. Only i can access the shell by pressing 's' while in NITDroid boot menu. I have 2 menu item available in boot menu as follows:

1 - NITDroid 2.6.28.NIT.06 on mmcblk1p2
2 -

I get the following message if i press '0' to boot maemo

can't flash kernel, required files not found
Guru Meditation #00000025.62107712

Hit any key to panic.

i try to flash N900 using nokia flasher_3.5 - but failed to do so because when i switched the phone off and press the 'u' key and plug the usb cable my phone start the nitdroid and goes to restart loop and the flasher can't able to recognize the phone.

Please, help me on this - how can i boot to maemo again. How can i uninstall multiboot and NITDroid without booting to maemo. Is there a way to do so using NITDroid shell. I don't have nitdroid-uninstaller and my phone has PR1.3 updated.

Laughingstok 2010-12-08 20:31
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
Quote:
Originally Posted by e-yes (Post 889213)
e-yes, I just wanted to say "You da man!" and I appreciate the work you're doing. I look forward to the reality of working phone calls and texting on NITDroid. Thank you.

stew-b 2010-12-09 12:56
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
will this work on a 1gb card? its all i have spare at the mo and want to take a peek...

cheve 2010-12-09 18:40
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
Does your unit become a bit warm after switching/running Nitdroid for awhile(say about 1hour of trying out different option and icon, playing with the UI)? Currently, nitdorid 0.0.8 is installed to the SD card.

also, a search(with nitdorid, warm, battery) points to this thread with >70pages of posts and the other one. Can one search result within a given thread?

Cheers,

lemmyslender 2010-12-09 19:25
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
I believe, in the advanced search, you can select "show post" instead of the default "show threads"

bunanson 2010-12-09 20:40
Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 
Quote:
Originally Posted by stew-b (Post 893223)
will this work on a 1gb card? its all i have spare at the mo and want to take a peek...

Absolutely YES.

bun


All times are GMT. The time now is 16:24.
Page 73 of 77 « First 637172 73 7475 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8