maemo.org - Talk - [Announce] USB hostmode beta release

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)

- - [Announce] USB hostmode beta release (https://talk.maemo.org/showthread.php?t=65232)

Re: [Announce] USB hostmode beta release

Quote:

Originally Posted by giecsar (Post 967487)

Hello everyone,

Regarding the Ethernet matter: has anyone tried a USB to Ethernet adapter yet? If so, did it work?

Yes, I did with a 10/100 I bought some time ago, and worked =D

Was amazing watching that working, with an eth0, working dhcp, and using it. I just tested and disconnected, so I did not any extensive test about speed, latency...

Re: [Announce] USB hostmode beta release

Hi I cant install h-e-n when I click to install I get a message:
Unable to install 'h-e-n (USB Hostmode GUI)' conflicting application packages.

when I click on details I got:
kernel-modules-maemo
kernel-maemo

What can be done here?

Re: [Announce] USB hostmode beta release

Quote:

Originally Posted by istota (Post 966276)

I know that it becomes boring ...
Joerg please please help me
When your user is the same kernel messange ends on ([53733.677764] scsi 8:0:0:0: CD-ROM TSSTcorp CDDVDW SE-T084M TD00 PQ: 0 ANSI: 0) there is no calculation (dev / sr0)

Regards and please help

Sorry, I have no idea why this syslog seems to stall prematurely. I can not reproduce this as I'm missing this harddrive.

/j

Re: [Announce] USB hostmode beta release

UPDATE - 03/18/2011 18:54PM PST: This issue was caused by a faulty USB cable.
So, I finally got my adapter in the mail today, and I followed the steps as shown on http://www.youtube.com/watch?v=3IyeSNGCWTA

But, instead of getting the network card to work, I got these errors:

Quote:

[ 1098.497711] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[ 1099.323669] usb 1-1: khubd timed out on ep0in len=0/64
[ 1099.385955] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1099.386016] musb_h_ep0_irq 1083: no URB for end 0
[ 1099.448547] usb 1-1: device descriptor read/64, error -110
[ 1099.579681] Forced hostmode error: no device attached
[ 1099.620391] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1099.620605] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1099.620666] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 1099.620727] hub 1-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
[ 1099.776733] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 1099.839294] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1099.901824] usb 1-1: new full speed USB device using musb_hdrc and address 91
[ 1099.964263] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.026794] usb 1-1: device descriptor read/64, error -71
[ 1100.198638] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.261077] usb 1-1: device descriptor read/64, error -71
[ 1100.432952] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.495574] usb 1-1: new full speed USB device using musb_hdrc and address 92
[ 1100.557983] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.620544] usb 1-1: device descriptor read/64, error -71
[ 1100.792358] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1100.854858] usb 1-1: device descriptor read/64, error -71
[ 1101.026794] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1101.089294] usb 1-1: new full speed USB device using musb_hdrc and address 93
[ 1101.511138] usb 1-1: device not accepting address 93, error -71
[ 1101.573669] Forced hostmode error: a full/low-speed device attached but high-speed mode selected
[ 1101.636169] usb 1-1: new full speed USB device using musb_hdrc and address 94

With "Full Speed" selected, I get:

Quote:

[ 1254.323669] usb 1-1: khubd timed out on ep0in len=0/64
[ 1259.323577] usb 1-1: khubd timed out on ep0in len=0/64
[ 1259.704864] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
[ 1259.800170] usb 1-1: device descriptor read/64, error -71
[ 1260.034576] usb 1-1: device descriptor read/64, error -71
[ 1260.269012] usb 1-1: new full speed USB device using musb_hdrc and address 86
[ 1260.394042] usb 1-1: device descriptor read/64, error -71
[ 1260.628234] usb 1-1: device descriptor read/64, error -71
[ 1260.862762] usb 1-1: new full speed USB device using musb_hdrc and address 87
[ 1261.284484] usb 1-1: device not accepting address 87, error -71
[ 1261.347259] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1261.347320] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 1261.347412] hub 1-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
[ 1261.503326] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 1261.628417] usb 1-1: new full speed USB device using musb_hdrc and address 89
[ 1261.753326] usb 1-1: device descriptor read/64, error -71
[ 1261.987701] usb 1-1: device descriptor read/64, error -71
[ 1262.222106] usb 1-1: new full speed USB device using musb_hdrc and address 90
[ 1262.347167] usb 1-1: device descriptor read/64, error -71
[ 1262.581451] usb 1-1: device descriptor read/64, error -71
[ 1262.815887] usb 1-1: new full speed USB device using musb_hdrc and address 91
[ 1263.237609] usb 1-1: device not accepting address 91, error -71
[ 1263.362854] usb 1-1: new full speed USB device using musb_hdrc and address 92

The network card does not show up in lusb, or ifconfig -a.

UPDATE - 03/18/2011 18:54PM PST: This issue was caused by a faulty USB cable.

Re: [Announce] USB hostmode beta release

Quote:

Originally Posted by AndrewX192 (Post 970699)

So, I finally got my adapter in the mail today, and I followed the steps as shown on http://www.youtube.com/watch?v=3IyeSNGCWTA

But, instead of getting the network card to work, I got these errors:

[...]

[...]

EDIT: This was a defective USB cable.

So, if I got that right, you say it's working now. I'd like to ask you to put that info at head of your post then, rather than as a footnote.

Thanks
/jOERG

Re: [Announce] USB hostmode beta release

Quote:

Originally Posted by joerg_rw (Post 970792)

So, if I got that right, you say it's working now. I'd like to ask you to put that info at head of your post then, rather than as a footnote.

Thanks
/jOERG

Good point, I have changed my original post to incorporate this.

Re: [Announce] USB hostmode beta release

please help,

flash drives and wireless keyboard is working with h-e-n on my n900 but mouse does not,
i am using logitech cordless desktop mk250

Re: [Announce] USB hostmode beta release

Quote:

Originally Posted by sunny2nisha (Post 970889)

please help,

flash drives and wireless keyboard is working with h-e-n on my n900 but mouse does not,
i am using logitech cordless desktop mk250

please take it to problems thread http://talk.maemo.org/showthread.php?t=65570, please read #9 post in this thread

thank you

Re: [Announce] USB hostmode beta release

problems with powerkernel46 missing modules.
See #9 in this thread and http://talk.maemo.org/showthread.php...219#post971219

Re: [Announce] USB hostmode beta release

can i charge my phone while using usb keyboard and mice