Re: Jolla hardware internals
 

weren't we told that high specs are less important than hw properly designed when we talked about low specs and high price in one of the threads before it was released? (sim, no proper partitions for flash(so it doesn't have to include blobs) and now battery?)

:/

Re: Jolla hardware internals
 

Well, I'm with you there that using Qualcomm HW is always a bad design choice since they are downright evil on their view of open design and should be boycotted really if there was any justice in the world :D

However, the general build of the device is very good on what I have found, and I have had no issues whatever related to the SIM card, battery or other mechanical aspects of it.

Re: Jolla hardware internals
 

Regarding the apparent SIM issue, and having reported that I could reproduce putting pressure on TOH, where the SIM is, to disconnect it, and to demonstrate other use cases: I've just jumped about 40 times with the phone in my jean's front pocket and no disconnection happened. Don't ask why I jumped, maybe it was only to make this point, maybe not ;-)

TL;DR: my SIM disconnection problem may not be _that_ serious, or at least device/SIM dependent.

Re: Jolla hardware internals
 

My phone speaker stopped working completely after receiving 2 messages in the same time in mitäkuuluu. I'm not sure does it have anything to do with the custom ringtone in /usr/share/sounds/jolla-ringtones/stereo.

Now I can't get it working again, already rebooted many times. Sounds work in general though.

Not sure should I create another thread or does anybody have good hints for the problem?

Re: Jolla hardware internals
 

as i understand SIM problems are random, but again not everyone had problems with pixel syndrome on n950 or broken usb on n900. I'm really scared there as i lost my n900 that way :(

Re: Jolla hardware internals
 

It would be really useful to know if the micro USB socket is mounted with through hole soldered lugs to give it mechanical strength or is it just relying on surface mount soldering to keep it in place.

This was a weakness with the N900 and would necessitate ultra gentle plug/unplugging to minimise any opportunity for damage.

Richard

Re: Jolla hardware internals
 

Is the function of the two hidden pins known?

http://s21.postimg.org/plh1z7m6v/top_a_1.jpg

Re: Jolla hardware internals
 

Little hint:

Take a look at the back side of the frame that was covering the PCB and the pins ;)

Re: Jolla hardware internals
 

There seem to be some microchips under the shield. Only diagnostics?

Re: Jolla hardware internals
 

I have read that the main chipset is qualcomm MSM8930aa.
Is there a datasheet somewhere ?