maemo.org - Talk - camera-ui2 (now a part of CSSU) (updated 09. May)

Hi guys, I just updated to the most recent CSSU (21.2011.38-1maemo1.2) with camera-ui 1.1.29.2+0cssu10. Now there is a problem when trying to take photos or videos; when i try to capture anything it says that the memory is full, and when i try to change the save-path it tells me that the memory is in use... Is this a known issue, and is there a solution for this? Thanks!

nkirk

2012-01-18 17:09

Re: camera-ui2 (now a part of CSSU) (updated 09. May)

Quote:

Originally Posted by RichardN900 (Post 1152138)

Default or customized?..
Or try to customize a default one?

you can use the default DSP profile with SR=0 to see whether it works, if it works you can lower the voltages till you find the lowest possible figures.

Or, you can move OC DSP frequencies to higher frequencies and experiment while having SR=1 (on).

Eg 720 xx 500, 805 xx 560 instead of 720 xx 520 and 805 xx 600

And SR means what?

Smart reflex, a power saving feature. Its enable by default.

.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
/nkirk

nicolai

2012-01-18 17:24

Re: camera-ui2 (now a part of CSSU) (updated 09. May)

Quote:

Originally Posted by XiliX (Post 1152384)

Hi,
this shouldn't happen. And I can not reproduce this.

Can you post the output of this command(it reads
camera-settings from gconf):

gconftool -g /apps/camera/settings/basic-settings/storage-device

nicolai

marmistrz

2012-01-18 17:28

Re: camera-ui2 (now a part of CSSU) (updated 09. May)

Quote:

Originally Posted by XiliX (Post 1152384)

I had this problem too. After reboot it started to work again.

XiliX

2012-01-18 17:47

Re: camera-ui2 (now a part of CSSU) (updated 09. May)

@marmistrz, I tried that, several times, didnt work... :s

@nicolai. The output is from "gconftool -g /apps/camera/settings/basic-settings/storage-device" is "-1".
I dont know what it means, but I hope you do ;)

After a Google search on internet I found that it might be a corrupt filesystem, which leads to a read only mode, so i tried to repair the FS with windows, and it helped a bit. When I first started camera-ui after the repair it worked for a second and than it gave the same error again...
Thanks :)

nicolai

2012-01-18 18:03

Re: camera-ui2 (now a part of CSSU) (updated 09. May)

Try this:

gconftool -s /apps/camera/settings/basic-settings/storage-device 0 -t int

XiliX

2012-01-18 18:08

Re: camera-ui2 (now a part of CSSU) (updated 09. May)

@nicolai
That worked! I can take pictures again! Thanks a lot, I already planned restoring my backups (trough backupmenu).
But, just out of curiousity, what exactly did i change with gconftool -s /apps/camera/settings/basic-settings/storage-device 0 -t int, and what are the values -1 and 0?
Thanks! :)

nicolai

2012-01-18 18:52

Re: camera-ui2 (now a part of CSSU) (updated 09. May)

0 and 1 are values for external (mmc) and internal storage.
2 is a value which I use for one special case, the user
wants to use mmc storage but the mmc is temporarly not
available (device connected through USB for example).
-1 is invalid for this entry I don't know why it is written.

All times are GMT. The time now is 05:57.

Page 82 of 114

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8