maemo.org - Talk
Page 89 of 140 « First 798788 89 909199 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread (https://talk.maemo.org/showthread.php?t=45388)

Beatty 2010-11-03 18:56
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by richwhite (Post 862379)
Can anyone tell me the code for QBW to have 'general' profile, 'silent' profile, and OCing? Currently I use CMD but i prefer QBW because i can have the backgrounds transparent
I use MA-G's scripts as they are easy to remember and find
http://talk.maemo.org/showpost.php?p=784834&postcount=1

Dousan 2010-11-03 19:30
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
@jonWW i've had the same issue with the beecons not rotating, sometimes one sometimes more and a reboot will help. If it's only one or two it will help to remove the beecon(s) and apply it/them again.

I just checked my uptime and it's almost two days and havn't had any issues with non rotating beecons ;)

Ohh and sometimes it helps to tap a beecon or just switch desktop and back...

Last thing is it was a bad cmd that caused my problems, not the QBW update to 1.3.2 :)

richwhite 2010-11-03 19:59
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by JonWW (Post 862425)
You may need to call the dbus command with
Code:
run-standalone.sh dbus-send --type=m...
Pop all your command into QBW and test to see if they work.

The Advanced settings have a multi line edit box which makes it much easier to edit your commands. QBW scripts are basically normal XTerminal scripts so you might find it easier to test in XTerminal, but the Advanced settings will also display the output if you press Run
sorry i'm a bit confused. For OCing in x-term i do the sudo gainroot, kernel-config load ideal, then set my own limits and avoid 125000 and finally save it. So in cmd i just type the echo command load myconfig etc. which one would i put into QBW? And would i put it into the main page or Advanced tab?

richwhite 2010-11-03 20:01
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by Beatty (Post 862497)
I use MA-G's scripts as they are easy to remember and find
http://talk.maemo.org/showpost.php?p=784834&postcount=1
But that doesn't seem to mention OCing or phone profiles?

Beatty 2010-11-03 20:11
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by richwhite (Post 862554)
But that doesn't seem to mention OCing or phone profiles?
--profileset does profile setting
You're right re OC. You could try this
http://wiki.maemo.org/Desktop_Comman..._CPU_frequency

richwhite 2010-11-03 20:23
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by Beatty (Post 862562)
--profileset does profile setting
You're right re OC. You could try this
http://wiki.maemo.org/Desktop_Comman..._CPU_frequency
That's what i already use in CMD. What's confusing me is do i use the same code i'd use in CMD in QBW? And, if so, where does that code go? In other words, do i need to open 'advanced' and put it there, or do i just do 'add cmd' from the main screen options?


ETA: Don't worry, i did the 'add cmd' and tested general and it worked a treat, thanks! Will try OCing and see how that goes.
On that note, can anyone tell me the command for stock power? So if i OC then want to revert to 600MHz wthout a reboot?

Beatty 2010-11-03 20:26
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by richwhite (Post 862571)
That's what i already use in CMD. What's confusing me is do i use the same code i'd use in CMD in QBW? And, if so, where does that code go? In other words, do i need to open 'advanced' and put it there, or do i just do 'add cmd' from the main screen options?
I haven't used that particular one, but all mine go in the basic CMD area. It is capable of (to me) fairly advanced stuff like if statements etc. Have never been game to try any of the Advanced options.

E - you beat me to it.

OT - I notice that quite a few people have CPU setting widgets. Is there a reason for this? (mine is set at 1100 permanently and have never seen the need to scale back down)

JonWW 2010-11-03 20:39
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Rich
Open your QBW and press Add Cmd, in there type your command
Code:
sudo kernel-config load ideal
after you have done that if you press Advanced Settings your will see you command there. Both boxes are the same, the Add/Edit Cmd boxes are single line boxes where as the Advanced Setting Cmd box is a multi line box for complex scripting.

Everything is the same as the normal command prompt, except you cannot use
Code:
sudo gainroot
as it will open a new shell and your script will stop as it will be waiting for the new shell to close.

richwhite 2010-11-03 20:54
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by JonWW (Post 862584)
Rich
Open your QBW and press Add Cmd, in there type your command
Code:
sudo kernel-config load ideal
after you have done that if you press Advanced Settings your will see you command there. Both boxes are the same, the Add/Edit Cmd boxes are single line boxes where as the Advanced Setting Cmd box is a multi line box for complex scripting.

Everything is the same as the normal command prompt, except you cannot use
Code:
sudo gainroot
as it will open a new shell and your script will stop as it will be waiting for the new shell to close.
which one can't do sudo gainroot?
i entered the OC code from desktop command execution widget into 'add cmd' but tapping on it doesn't affect the processor speed.
the ones i have are ideal with custom 250 min, 900max, and another min 250 man 1000, both avoid 125. How would i do that in QBW?

richwhite 2010-11-03 20:57
Re: [Announce] Queen BeeCon Widget: Super powerful and customizable Widget Generation Engine - Official Thread
 
Quote:
Originally Posted by Beatty (Post 862574)

OT - I notice that quite a few people have CPU setting widgets. Is there a reason for this? (mine is set at 1100 permanently and have never seen the need to scale back down)
well i don't have mine load OCed, deliberately. I just OC periodically so i have widgets set up


All times are GMT. The time now is 20:36.
Page 89 of 140 « First 798788 89 909199 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8