Re: How to hard reset a N900?
 

Dear all,
I insert my SIM & put my battery and press u and hold it.then connect usb cable.then ran following command:
flasher-3.5 -F RX-51_2009SE_3.2010.02-8.203.1_PR_COMBINED_203_ARM.bin -f -R
And i get following result:
/////////////////////////////////////
flasher v2.5.2 (Oct 21 2009)

SW version in image: RX-51_2009SE_3.2010.02-8.203.1_PR_203
Image 'kernel', size 1704 kB
Version 2.6.28-20094803.3+0m5
Image 'rootfs', size 158464 kB
Version RX-51_2009SE_3.2010.02-8.203.1_PR_203
Image 'cmt-2nd', size 81408 bytes
Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
Version BB5_09.36
Image 'cmt-mcusw', size 5824 kB
Version rx51_ICPR82_09w47
Image '2nd', size 14720 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.4.4+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.4.4+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.4.4+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.4.4+0m5
Suitable USB device not found, waiting.
/////////////////////////////////////
It can't find usb bus address.i passed with -U every bus addresses, but after ls /proc/bus/usb/ i found out that above directory is free.this means it didn't know my cell phone.
what do i do?

Re: How to hard reset a N900?
 

I've found that waiting for the "Suitable USB Device not found, waiting" to come up, then holding 'u' and connecting, has a higher success rate.

Maybe it's just dumb luck, but try it.

Re: How to hard reset a N900?
 

I prssed u & hold it. But i didn't see anything.

Re: How to hard reset a N900?
 

Oh i saw dark screen after 7-10 min.But i didn't see usb logo.what do i do ?

Re: How to hard reset a N900?
 

Problem was solved, in this case , my n900 could charge via laptop, even in 2 3 hours.i used my friend's battery.

Re: How to hard reset a N900?
 

You can simply use this method Here

Re: How to hard reset a N900?
 

I flashed successfully.

Re: How to hard reset a N900?
 

I NEED HELP.. please help me.. :( yesterday I played with my n900 and was into the filebox app and then i happened deleted some dictionaries and today when i reboot the n900 it didnt work normal... and i tried to hard reset it which i have did it manny times.
I tried to flash firmware and it worked but when i tried to flash MMC it didnt work.. :(
I tried a lot of times to flash both firmware and MMC, but MMC doesnt reflash... i found out that when i try to flash MMC and when I press entre to start flashing, the usb logo dissappears on the n900 screen and that happens everytime i try to flash the MMC.. can you tell me what the problem could be please I need help please.. :( :(

Re: How to hard reset a N900?
 

wow what a maemo community.. no1 is there to help me.. WTF!?

Re: How to hard reset a N900?
 

Thanks for your help loser maemo community!! I really didnt expect you to ignore someone whos into a big problem and need your help!! again thanks losers! I managed it myself after going through the whole f@cking internet search!