Originally Posted by God (Post 422860)

Here are the steps;

Step 1: Maemo flasher-3.5exe > Open it up > type; flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MRO_ARM.bin -f -R

Step 2: it will say "device not found"; plug the usb in the N900 - wait until "Nokia" comes up then proceed to the next step

Step 3: type the next command; flasher-3.5 -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R

Last step: you will see your N900 starting like out of the box.


(LINK TO THE FLASHER, IF YOU DON'T HAVE IT)

Originally Posted by christexaport (Post 423290)

Thans, God. You never mentioned where you are from or how old you are. Care to tell?

Originally Posted by ninjaboxergirl (Post 424753)

Mine is bricked- not a peep out of it now- and even Nokia Care's repair centre can't fix it. What a shambles this has all been. Now I can't get hold of MPD, they ignored my email request for a returns code which Nokia Manchester had instructed me to do- and now I have to wait while Monday to attempt to speak to someone at Nokia Care.

Originally Posted by christexaport (Post 424789)

did flashing fail?

Originally Posted by christexaport (Post 425560)

ninjaboxergirl, did yiu try it yourself? SOme of the care centers don't have the proper training to know how, according to a few other posters. I suggest you give it a shot. I'm ready to help if you need a guide.

Originally Posted by God (Post 422860)

Here are the steps;

Step 1: Maemo flasher-3.5exe > Open it up > type; flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MRO_ARM.bin -f -R

Step 2: it will say "device not found"; plug the usb in the N900 - wait until "Nokia" comes up then proceed to the next step

Step 3: type the next command; flasher-3.5 -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R

Last step: you will see your N900 starting like out of the box.


(LINK TO THE FLASHER, IF YOU DON'T HAVE IT)