Re: [WIP] Wireless charging TOH
Quote:
Originally Posted by Silwer
(Post 1408282)
I just received my two sets of Touchstone charger pads and receivers. Installed one receiver to my white and other to my poppy red other half.
However, I have problems. First - every second or two I am receiving charging notifications and it is very annoing.
Second issue is that while charging either charger or receiver is making quiet, but still clearly audiable electrical whining noise. Is it normal?
These issues I have with my both sets of receivers / chargers. I am using 1A charger connected to the Touchstone pad. Any suggestions?
EDITED:
Checked with CSD tool and it is not charging. It just circulates between "Full" and "Discharging". However, battery level is only at 21%.
EDITED2: Somehow problems just solved by themselves. No noise and it is charging now properly. Do not know, what the issue was.
|
Problem was in the chargers. I bought two cheap chargers from ebay that were rated 2A. Actually their output was about 0,15A less than Nokia N9 original charger that is rated 1A (measured with CSD tool). I also tried my other chargers that were rated 0,5A and 0,65A. These were not sufficient to provide charging through Touchstone kit (charging did not start at all). Now, using Nokia N9 1A chargers all works fine. Therefore - when choosing a Touchstone kit, make sure that your charger is able to output at least 1A as otherwise it just wont work properly. |
