maemo.org - Talk
Page 9 of 40 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   [HOWTO] Comprehensive Firmware Flashing Guide for N9 (https://talk.maemo.org/showthread.php?t=82693)

thedead1440 2012-09-25 02:59
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
I think you have to flash with the same pr legacy of 341...

Maybe your carrier has locked it so you have no choice but to use pr legacy 341 for pr1.3 to flash...

aliengoa 2012-09-25 10:19
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
There is no PR1.3 for my Variant :(
That's why i was trying to flash other FW

According to the first post i can upgrade my N9 and change the variant,
i want to do this: "PR1.2 variant 341 to PR1.3 variant 001"

i dont know why it doesnt work.

Is this considered a downgrade?

thedead1440 2012-09-25 12:53
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
It isn't considered a downgrade...Its just some carriers try to lock users out...

Anyway I think what we can do is flash both rootfs+emmc at one go...Maybe then it would go thru...

buky 2012-09-25 18:10
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Just a quick question. I flashed non branden ROW Firmware PR1.3 a couple of days ago, but only .bin file.

Do i have also flash emmc file also, and what is this actually.

Thanks

Zelig 2012-09-25 21:41
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
tried to flash my Nokia N9 with my MacBook by running (as user):

Flasher -F fw.bin -F emmc.bin -f

and got:

FIASCO ERROR: FIASCO subimage data length mismatch

any idea?

EDIT: could it be that the renaming emmc image to emmc.bin is the cause? (Flasher -F fw.bin -f is working properly)

thedead1440 2012-09-26 04:02
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Zelig,

It means your fw image is corrupted and not downloaded correctly...

If your fw.bin flashes ok it means your emmc.bin is corrupted... Re-downloade it and try...

nikhilsyangbo 2012-09-30 22:36
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
cn any1 plz uplaod files needed for my nokia n9 to flash its product key is 059L6B5 plz i cn'.t download it from naviframe coz my net is slow :( n also cn't resume it in case of dc

nikhilsyangbo 2012-10-01 04:28
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
plz any 1 help me i'll b very thank full :(

chaveago 2012-10-02 15:39
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Hi!

I've got my N9 in Russia on 21.9.2012 (Product code is 059J208).It came with PR1.1. Same evening I performed an update to PR1.3 via WiFi and everything was OK untill last wednesday, where it rebooted by itselfs and showed "there is a problem with your SIM card" message. It makes no difference, whether or not the SIM is inside of the phone, but if it is inserted, the SIM Module gets warmer after short time. IMEI number doesn't show by *#06# or in "about product".

Flashing (only OS) didn't change that issue.

May be someone can help me.
Tnx in advance
Andy

thedead1440 2012-10-02 16:00
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
chaveago,

Did you ensure your sim card isn't inserted when flashing?

chaveago 2012-10-02 16:22
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Yepp, I pulled it out as I realized that it gets warm. The phone wasn't flashed yet.

thedead1440 2012-10-02 16:25
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
So now try doing the flash with the sim removed?

Post the output here of your flash so that it can be ensure your flash indeed went successfully...

unfuccwittable 2012-10-02 17:18
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Is there any options for flashing on a Mac? My windows PC died so I'm stuck with this Mac for the time being but I need to flash my phone to rid myself of Faster Darker Better.

kollin 2012-10-02 17:43
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by unfuccwittable (Post 1275420)
Is there any options for flashing on a Mac? My windows PC died so I'm stuck with this Mac for the time being but I need to flash my phone to rid myself of Faster Darker Better.
Just make an Ubuntu Virtualbox machine ;)

https://www.virtualbox.org/wiki/Downloads

thedead1440 2012-10-04 10:43
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Why do you need to flash to get rid of faster darker? Use RD mode to do so...

maayroldan 2012-10-04 14:39
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by nicodonte (Post 1173781)
No problem to flash with a Claro branded N9 from Argentina, no blocked at all, firmware update without any problem.
Hi, i tried to flash with Claro Argentina firmware from Navifirm on WinFlasher, but its still giving an error (bb5_rdc..). If you can tell me how can i do it i will be thankful because i tried also flash it on Phoenix but some errors showed up too.

thedead1440 2012-10-04 14:56
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by maayroldan (Post 1276338)
Hi, i tried to flash with Claro Argentina firmware from Navifirm on WinFlasher, but its still giving an error (bb5_rdc..). If you can tell me how can i do it i will be thankful because i tried also flash it on Phoenix but some errors showed up too.
Can you post the full output from WinFlasher?

maayroldan 2012-10-04 15:38
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by thedead1440 (Post 1276345)
Can you post the full output from WinFlasher?
bb5_rdc_cert_read failed (6 times)
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcB2GEfv/internal10p2'
mmc: Could not remore mount directory /tmp/sudmmcB2GEfv/mnt: Not such file or directory
MTC_NOS_READY not received

ERROR: Failed to flash images

:confused:

thedead1440 2012-10-04 15:42
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
That is worrying...I think your emmc partition is faulty...

Maybe try using another PC?

maayroldan 2012-10-04 15:46
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by thedead1440 (Post 1276378)
That is worrying...I think your emmc partition is faulty...

Maybe try using another PC?
Yeah I dont know :| I will try, need to recover the phone lol. Thank you ! Im gonna tell you what happens with it .

Markkyboy 2012-10-06 20:57
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Big thanks to itsnotabigtruck!,

I managed to get my N9 stuck in 'boot loop'.
After a lot of trawling, I came across this guide. Well written, easy to understand and best of all, my phone is now working again!

My previous phone was a Nokia N8, I found the process with Phoenix was complicated and not always reliable.
Flasher.exe - Simple!

Thanks again, for your time and effort compiling this guide!

Regards

Markkyboy

mesias 2012-10-11 17:59
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Hello guys i am from greece and i am using an unlocked n9 from orange, i am triying to update to 1.3 but also the device and the ovi suite cant find any updates , is there any way to update it?

the product code in the sim tray is 059L7Z9

minimos 2012-10-11 21:03
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by mesias (Post 1279396)
Hello guys i am from greece and i am using an unlocked n9 from orange, i am triying to update to 1.3 but also the device and the ovi suite cant find any updates , is there any way to update it?

the product code in the sim tray is 059L7Z9
Indeed, it doesn't seem that PR1.3 has been released for that variant (PTK Centertel, Orange Poland).
You have two choices:
- wait for the release (e.g. it seems recently a Swiss variant came out)
- go for flashing, in which case I'd recommend to use the more general ROW (rest-of-world) version

mesias 2012-10-12 19:11
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
i am trying to flash a row firmwares but i have error


USB device found at bus 002, device address 007.
Device identifier: 357923045385582 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 95 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1340721938)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

thedead1440 2012-10-13 01:56
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
try removing your sim card and disabling any device and MfE lock/code before trying again...

Markkyboy 2012-10-19 22:26
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Hi guys,

my N9 is already on 40.2012.21-3 (PR 1.3).

Current firmware:
RM-696 Country Variant Australia AU Black V1 059L698

Can I change it to this firmware?:
RM-696 NDT UK IRELAND BLACK 059J1Z7

Regards

Markkyboy

minimos 2012-10-20 06:50
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Nope.

"RM-696 Country Variant Australia AU Black V1 059L698" is using variant 009
(i.e. flash file is DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009)
while
"RM-696 NDT UK IRELAND BLACK 059J1Z7" uses basic variant 001 (similar file name, but it ends with _001)

001 < 009 so flash would not succeed (flasher tool would consider it a 'downgrade' and it would not allow it)

philheaton 2012-10-22 20:46
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by mesias (Post 1279846)
i am trying to flash a row firmwares but i have error


USB device found at bus 002, device address 007.
Device identifier: 357923045385582 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 95 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1340721938)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images
+1 here. I have exactly the same output trying to flash a ROW image.

thedead1440 2012-10-23 01:51
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by philheaton (Post 1284122)
+1 here. I have exactly the same output trying to flash a ROW image.
that means you already have pr1.3 with a higher pr legacy than 001...

Post here the output of

Code:
flasher -i

philheaton 2012-10-23 08:27
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by thedead1440 (Post 1284238)
that means you already have pr1.3 with a higher pr legacy than 001...

Post here the output of

Code:
flasher -i
Here it is.

Code:
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.342.01.1_PR_342
Success

thedead1440 2012-10-23 08:32
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
See:

Code:
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.342.01.1_PR_342
Your pr legacy is 342 so you can only flash with a fw of pr legacy 342 or higher...

ROW FW is pr legacy 001 hence it fails as downgrading isn't allowed even within the same fw version (pr1.3)...

philheaton 2012-10-23 08:59
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Bloody annoying!

thedead1440 2012-10-23 12:02
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by philheaton (Post 1284339)
Bloody annoying!
You shouldn't have done an over-the-air update :p

The forum here is quite fast when it comes to updates with proper guides so just refer here next time...

Pingo 2012-10-31 00:10
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Hi, I've got a N9 which shows the yellow warning triangle telling me that I have changed the software.

I have now tried re-flashing (on several computers) using this guide but it gives me an error message.

Anyone who can help bring it back to life?
----------------------------------------------------

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Program Files\Nokia\Flasher>flasher.exe -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Success

C:\Program Files\Nokia\Flasher>flasher.exe -f -F DFL61_HARMATTAN_40.2012.21-3_PR
_LEGACY_001-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 13141 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[_] kernel [writing 37 % 2048 / 2714 kB 1910 kB/s]
[_] rootfs [finishing 100 % 2048 / 1170282 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3540 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1314 kB/s]
[f] rootfs [finishing 0 % 2048 / 1170282 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmczZnBYu/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmczZnBYu/mnt: No such file or dir
ectory
[Pipe 5] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>

An9 2012-10-31 02:18
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Take it easy, don't jump at ones on fllashing the device, but first install the pcsuite software and just insert your phone on one of USB ports and select as syncronising device and let it instal the phone device driwers and after is finish installing pull USB out few sec then put it again on the same USB port but select as Storage driver, and let it install drivers...then prepare your fllashing operation.
I might guess..that your phone allready was fllashed with "zimage" for nitdroid that's why you are getting the warning on screen, weell fllashing it again it will vipe that duo boot...but is up to you...
I see by the product version...you are atempting to update, and local version is 001 as you see on firmware file...don't use higher value than that.
Try this way...to make it easy fllashing your phone, maybe you should make dir in c:/nokia and install fllash in there and import your firmare.bin in that c:/nokia/fllasher and in comand line on dosbox-win enter like this:
c:/nokia/fllasher/fllasher.exe -f -F c:/nokia/fllasher/firmware.harmatan_001.bin and turn your phone OFF.
I did fllash my phone by turning on instead bcz pc could not find my phone few times...so it might happen to your phone to...so try borh ways...but careful do not disconect cable if pc and phone are active and operating fllashing or transfering files!

thedead1440 2012-10-31 03:29
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Yikes :eek: it looks like another of those N9s with dodgy flash memory...

Pingo 2012-11-01 20:12
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Thanks AN9 and THEDEAD1440!
Unfortunately it seems that it is a hardware issue. I have tried and tried but no success.
Is there any possibility to install a kind of "basic" software? I don't really have anything to loose now.

thedead1440 2012-11-02 12:22
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by Pingo (Post 1288694)
Thanks AN9 and THEDEAD1440!
Unfortunately it seems that it is a hardware issue. I have tried and tried but no success.
Is there any possibility to install a kind of "basic" software? I don't really have anything to loose now.
Sadly I'm not aware of much options other than having to take your device in to Nokia Care :(

koorosh-n9 2012-11-13 12:08
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by MINKIN2 (Post 1212132)
Sorry to bump again guys, but I am still trying to find a compatible firmware for my n9.

I hate to sound whiny, but I do have the warranty issue still pending with my screen fault and ATM I am stumped? I understand that I have to use a higher firmware version but can't find it

Here is the last attempt of flashing... (hopefully an eagle eyed user may spot) something?)

C:\Program Files\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_006
Success

C:\Program Files\Nokia\Flasher>flasher -f -F DFL61_HARMATTAN_30.2012.07-1_PR_LEG
ACY_001-OEM1-958_ARM.bin --erase-user-data=secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_006
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 20274 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8

Battery level 71 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 71 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1329851503)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>


EDIT: Finally, found an image

Battery level 81 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3003 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1232 kB/s]
[x] rootfs [finished 100 % 966666 / 966666 kB 10434 kB/s]
Updating SW release
Success

:D :D :D :D :D
You would not believe how many images I have tried.
can you Give me the Image Version :(
i have same Error

thedead1440 2012-11-13 12:10
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
 
Quote:
Originally Posted by koorosh-n9 (Post 1293764)
can you Give me the Image Version :(
i have same Error
Are you sure you have the exact same error? Post the output here along with the colour of your n9, 16/64GB and which region of the world you are from...


All times are GMT. The time now is 09:50.
Page 9 of 40 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8