Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

Optified packages rebuilt from Diablo - quick hack but works for me...

apt-get install libart-2.0-2 libpcre3
Download and install as root:
libgoffice-0-6-common_0.6.3-2_all.deb http://gudmundson.se/anders_gud/inde...download&id=39
libgoffice-0-6_0.6.3-2_armel.deb http://gudmundson.se/anders_gud/inde...download&id=40
gnumeric_1.8.3-5maemo1_armel.deb http://gudmundson.se/anders_gud/inde...download&id=42

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

You don't need to install libgsf-1 if you installed Evince before that.

You will also need apt-get install libart-2.0-2

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

had to install
- libart-2.0-2
- libpcre3
first (with apt-get)

libgsf seems newer if installed with apt-get as well. installed provided libgsf from the link, and then i was offered an upgrade on apt-get update / apt-get upgrade

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

anders_gud, thanks a lot for this. It works fine if you use the stylus.

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

BTW, comparing the performance of Gnumeric with the KOffice alpha viewer for complex documents, Gnumeric wins by a lot.

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

anders_gud, thanks a lot for this

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

Thanks a lot. Been hoping someone would do this.

Installed: libgsf-1, libpcre3 (with extras-devel enabled) with apt-get after running dpkg.

Works great.

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

does anyone know how to get off fullscreen mode?
________
Hyde Park Residence Pattaya

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

gnumeric newbie:
is multiple tabbed sheet supported? i open a 3 tabbed sheets file and i don't know how to navigate to the other sheets. thanks.

Re: Gnumeric on Fremantle for the impatient (spreadsheet app)...
 

It is possible to edit a Gnumeric file on the Diablo version for N810 so that a "Manage Sheets" is at the botton. I would think you could do the same for N900 version. See post #17 of this link:

http://http://talk.maemo.org/showthread.php?p=313774

Attachment 7322