After update PR1.3 problem
 

I found a lot of software like OM weather can't display on desktop after a reboot. Is it only me?

Re: After update PR1.3 problem
 

Same here.. Drlaunch used to be on my n900 desktop screen, but whenever I restart/reboot the device, Drlaunch widget needs to be readded to the desktop again, I also noticed that i cannot connect to my 3G network. it keeps telling me that "Internet Connection Failed" I'm planning to flash it back to PR1.2, any help?fix?

Re: After update PR1.3 problem
 

OM Weather works fine in PR1.3 for me. It may be that you have somethings else going on. You may also want to check that you actually have PR1.3 installed (check the system->About N900 for the version). In some cases AppManager does the install, reboots, and you wind up in a mixed, partial install. (You can also run AppManager again and see if it still shows an upgrade available.)

The only thing I've found that legitimately won't work in PR1.3 is Xploder, from the OVI store. There are a few apps/libs that have issues, but not anything I use. (libcluter I hear has isues).

If you're going to re-flash, you may want to re-flash with 1.3 and update from there. Good odds you have some junk floating around from previous apps that's causing problems more than PR1.3 causing it.

Re: After update PR1.3 problem
 

Omweather is displaying just fine for me.

Re: After update PR1.3 problem
 

Um... Not having any problems here...

Re: After update PR1.3 problem
 

have you guys tried connecting to 3G network?

Re: After update PR1.3 problem
 

I h ave flashed it using nokia software update by the way. version says 20.2010.36-2.002, this is correct right?

Re: After update PR1.3 problem
 

Yes, no problem.. I used OTA..

Re: After update PR1.3 problem
 

I can not move the slider in media player during mp3 playback. :o(

Re: After update PR1.3 problem
 

I updated OTA and everything is working fine. The Email program is MUCH faster. The only thing I had to redo was reinstall the Enhanced Linux kernel for power users (settings) and reset the settings to overclock. Am now running at limits 250 850 with no problems and have the feeling N900 is running smoother than ever. Would really like to know exactly what the update is... has anybody found change logs somewhere ??